Guest Editors' Introduction: Overview of Sensor Networks

Wireless sensor networks could advance many scientific pursuits while providing a vehicle for enhancing various forms of productivity, including manufacturing, agriculture, construction, and transportation.     

Stability of a floating cylinder

A cylinder having a length less than 0.707 of its diameter will float with its axis vertical while one of length exceeding one diameter floats with its axis horizontal. This transition range was investigated and under certain circumstances, two stable positions of the cylinder axis were found in each quadrant of rotation. Details of behaviour in the transition range were attributed to the edges of the square-ended cylinder.     

Formaldehyde content of milk in goats fed formaldehyde-treated soybean oil-meal

Formaldehyde is used in ruminant feeding for different purposes including the protection of dietary proteins from ruminal degradation. The formaldehyde content of milk of goats fed various levels of formaldehyde-treated soybean oil-meal has been determined by using a sensitive HPLC method. Results showed a significant linear correlation between ingested formaldehyde and formaldehyde concentration in milk. About 0.02% of ingested formaldehyde was excreted in milk, as free formaldehyde.     

Ionization of Acetylacetone in Me2SO—Water Mixtures. Reactivity—Selectivity Principle or Principle of Imperfect Synchronization?

Rate constants for the reversible deprotonation of acetylacetone were measured in carboxylate and amine buffers in water and in 50%, 90% and 95% Me₂SO at 20°C. The Brønsted plot for the carboxylate ions is curved in the Me₂SO—water mixtures, but straight in water. The curvature is in the direction predicted by the Reactivity—Selectivity Principle (RSP). However, the Brønsted plot for the reaction with primary amines is straight in all solvents. This suggests that the curvature observerd with the carboxylate ions is caused by loss of solvation of the base; this loss of solvation is ahead of bond formation in the transition state rather than being a manifestation of the RSP. (Note that all Brønsted plots are based on pK_a values measured in the respective solvents.) The intrinsic rate constant (k₀) for proton transfer increases with the addition of Me₂SO, and more so with the carboxylate buffers than with the amines. This increase in k₀ is attributed to delayed solvation of the developing enolate ion in the transition state; with the carboxylate buffers, an additional factor is the early loss of solvation of the base. The various solvation effects observed in this study can all be understood in the context of the Principle of Imperfect Synchronization (PIS).     

Effect of Contact Residual Stress Relaxation on Fracture Strength of Indented Soda-Lime Glass

The strength of Vickers-indented soda-lime glass measured in air at room temperature steadily increases with time after indentation, whereas optical retardation steadily decreases in the same interval. Annealing after indentation causes further strength increase and retardation decrease. The results are consistent with Marshall and Lawn's treatment of the slow crack growth of indentation flaws driven by the combined influence of residual contact stress and applied stress. Post-indentation strengthening of indentation flaws can be explained without recourse to flaw blunting.     

Synthesis of Si3N4 with Emphasis on Si-S-N Chemistry

Industrial production of Si₃N₄ from SiCI₄, is increasing. An element rivaling CI in abundance and cheapness with potentially suitable chemistry for this application is sulfur. Thus, Si–S–N chemistry was investigated to determine its usefulness in producing Si₃N₄. Bifunctionality in S, as opposed to mono-functionality in CI, may allow special routes via polymers to become important.     

Use of electrochemical oxidation process as post-treatment for the effluents of a UASB reactor treating cellulose pulp mill wastewater.

The main purpose of this study was to evaluate the performance of the electrochemical oxidation process as a post-treatment for the effluents of a bench-scale UASB reactor treating simulated wastewater from an unbleached pulp plant. The oxidation process was performed using a single compartment cell with two plates as electrodes. The anode was made of Ti/Ru0.3Ti0.7O2 and the cathode of stainless steel. The following variables were evaluated: current density (75, 150 and 225 mA cm(-2)) and recirculation flow rate in the electrochemical cell (0.22, 0.45 and 0.90 L h(-1)). The increase in current density from 75 to 225 mA cm(-2) did not increased the color removal efficiency for the tested flow rates, 0.22, 0.45 and 0.90 L h(-1), however the energy consumption increased significantly. The results indicated the technical feasibility of the electrochemical treatment as post-treatment for UASB reactors treating wastewaters from pulp and paper plants.     

A remark on the converging-input converging-state property

Suppose that an equilibrium is asymptotically stable when external inputs vanish. Then, every bounded trajectory which corresponds to a control which approaches zero and which lies in the domain of attraction of the unforced system, must also converge to the equilibrium. This "well-known" but hard-to-cite fact is proved and slightly generalized here.     

Anaerobic biodecolorization of textile reactive anthraquinone and phthalocyanine dyebaths under hypersaline conditions.

The biological decolorization of two industrial, spent textile reactive dyebaths was investigated using a suspended-growth, halophilic mixed culture fed with glucose. Dyebath I contained mainly Reactive Blue 19 (RB19), an anthraquinone dye, whereas dyebath II contained mainly Reactive Blue 21 (RB21), a phthalocyanine dye. Batch assays under anaerobic conditions with the two neutralized dyebaths resulted in 87 and 37% extent of decolorization for dyebaths I and II, respectively. The rate of glucose utilization and the extent of acetate production were impacted in the presence of each dyebath as compared to the control culture. However, dyebath decolorization occurred despite moderate culture inhibition. Reuse of a biologically renovated RB19-containing dyebath in the dyeing process resulted in reproducible but not identical cotton fabric shades as compared to a standard dyeing (i.e., control) using fresh water. This difference is attributed to a variable degree of RB19 aggregation during the dyeing process and is not related to the efficiency of the biodecolorization process. Further improvement of the redyeing efficiency will lead to the development of an in-plant, closed-loop decolorization system resulting in significant water conservation and minimization of textile pollutants such as salt and dyes.