One-year monthly monitoring of Torque teno virus (TTV) in wastewater treatment plants in Japan

Torque teno virus (TTV) is a novel hepatitis virus which is considered to be transmitted by the fecal-oral route. Wastewater samples were collected monthly from eight wastewater treatment plants in Japan for 1 year, from July 2003 to June 2004, and tested for the presence of TTV by TaqMan PCR. TTV was detected in 97% (93/96) of influent samples, implying that TTV is epidemic in Japan. TTV was also isolated in 18% (17/96) of secondary effluent samples before chlorination and in 24% (23/95) of final effluent samples after chlorination. There was no significant difference between the concentration of total coliform in TTV-positive final effluents and that in TTV-negative final effluents, which indicates that total coliform cannot be used as an indicator of TTV. No TTV was detected in 24 effluents for reuse from two wastewater treatment plants using sand filtration and ozonation.     

Changes in dietary bioaccumulation of tributyltin chloride (TBTCl) in red sea bream (Pagrus major) with the concentration in feed

The effect of the concentration of tributyltin (TBT) in feed on the dietary bioaccumulation of tributyltin chloride (TBTCl) was studied in an 8-week uptake experiment and a 4-week elimination experiment using red sea bream (Pagrus major). The biomagnification factor (BMF) and the assimilation efficiency (AE) decreased from 0.30 to 0.15 and from 13% to 5.9%, respectively, as the TBT concentration in feed increased from 1.3 to 20 microg/g. The elimination rate constant (k(2)) was independent of the TBT concentration in the fish. Laboratory measurements of the BMF and AE of TBTCl underestimate actual field values if highly contaminated feed is used. Judging from the BMF and AE, the risk of the bioaccumulation of TBTCl through the food chain might be smaller than that of polychlorinated biphenyls.     

Development of a 400 kJ Nb3Sn superconducting magnet for an SMES system

An Nb₃Sn superconducting magnet to store 400 kJ was developed as a unit magnet for a 2.4-MJ SMES system used for stabilization studies of electrical power systems. The superconducting magnet consists of a cryostat and an Nb₃Sn coil. The dimensions of the coil are: 340 mm inner diameter, 700 mm outer diameter and 177 mm axial length. The pool-cooled coil is a stack of 20 Nb₃Sn double pancakes, and the cooling channels are aligned between pancake coils. To reduce Joule loss in electrical power converters, the maximum operating current of the coil is designed to be 350 A, which is one order of magnitude less than the operating currents of similar scale coils for pulse use. The conductor is an Nb₃Sn monolithic conductor with cross section 1.50 × 2.38 mm. For good superconducting stability and high dielectric strength of the coil, the Nb₃Sn double pancakes were wound by the react-and-wind technique. Operation of dc current to 105% (367.5 A) of the design operating current was achieved without quench. After the whole of the coil was exposed out of liquid helium, the coil did not quench under 120 A current operation for more than 2 hours. It was verified that the coil was stable for the SMES system. © 1998 Scripta Technica, Inc. Electr Eng Jpn, 121(3): 44–52, 1997     

Thermal properties of solution flow-induced PVA crystals

Poly(vinyl alcohol) was crystallized from its aqueous solution under a steady-state flow with different conditions. Using a differential scanning calorimeter (DSC), the thermal properties of PVA precipitates obtained by the flow-induced crystallization were measured, showing a single melting peak in the DSC curve. The melting temperature of PVA crystallized depended on the rate of stirring, crystallization temperature, concentration of PVA, yield of precipitates, and morphology of the crystals. Particularly, there was a closer relationship between the melting temperature and the yield of precipitates, i.e., it was through the effect on the yield of precipitates that crystallization conditions influenced the melting temperature. Generally, with certain conditions, the higher the yield of precipitates, the lower the melting temperature. Moreover, using electron microscopy, it was observed that there were some structural differences between the inner and outer sides of a PVA crystal mat round stirrer and between film-shaped and block-shaped crystals, leading to different melting temperatures. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1337–1344, 1997     

Suppression of Bone Necrosis around Tooth Extraction Socket in a MRONJ-like Mouse Model by E-rhBMP-2 Containing Artificial Bone Graft Administration

Medication-related osteonecrosis of the jaw (MRONJ) is related to impaired bone healing conditions in the maxillomandibular bone region as a complication of bisphosphonate intake. Although there are several hypotheses for the onset of MRONJ symptoms, one of the possible causes is the inhibition of bone turnover and blood supply leading to bone necrosis. The optimal treatment strategy for MRONJ has not been established either. BMP-2, a member of the TGF-β superfamily, is well known for regulating bone remodeling and homeostasis prenatally and postnatally. Therefore, the objectives of this study were to evaluate whether cyclophosphamide/zoledronate (CY/ZA) induces necrosis of the bone surrounding the tooth extraction socket, and to examine the therapeutic potential of BMP-2 in combination with the hard osteoinductive biomaterial, β-tricalcium phosphate (β-TCP), in the prevention and treatment of alveolar bone loss around the tooth extraction socket in MRONJ-like mice models. First, CY/ZA was intraperitoneally administered for three weeks, and alveolar bone necrosis was evaluated before and after tooth extraction. Next, the effect of BMP-2/β-TCP was investigated in both MRONJ-like prevention and treatment models. In the prevention model, CY/ZA was continuously administered for four weeks after BMP-2/β-TCP transplantation. In the treatment model, CY/ZA administration was suspended after transplantation of BMP-2/β-TCP. The results showed that CY/ZA induced a significant decrease in the number of empty lacunae, a sign of bone necrosis, in the alveolar bone around the tooth extraction socket after tooth extraction. Histological analysis showed a significant decrease in the necrotic alveolar bone around tooth extraction sockets in the BMP-2/β-TCP transplantation group compared to the non-transplanted control group in both MRONJ-like prevention and treatment models. However, bone mineral density, determined by micro-CT analysis, was significantly higher in the BMP-2/β-TCP transplanted group than in the control group in the prevention model only. These results clarified that alveolar bone necrosis around tooth extraction sockets can be induced after surgical intervention under CY/ZA administration. In addition, transplantation of BMP-2/β-TCP reduced the necrotic alveolar bone around the tooth extraction socket. Therefore, a combination of BMP-2/β-TCP could be an alternative approach for both prevention and treatment of MRONJ-like symptoms.     

Real-time investigation of crystallization in poly(vinylidene fluoride)-based nano-composites probed by infrared spectroscopy

Via time-resolved Fourier transform infrared spectroscopy (FTIR), we examined the real-time investigation of the conformational changes of poly(vinylidene fluoride) (PVDF) chain segment during crystallization of neat PVDF and the corresponding nano-composites having intercalated structure. It was shown that in the following crystallization processes the crystal growth was virtually the same in both nano-composites and neat PVDF. We have examined an annealing at an infinitely long time at 200 °C (∼20 min) to erase the thermal history in the nano-composites. The dispersed titanate nano-filler particles exhibited strong contribution to enhance the heterogeneous nucleation for the formation of both γ- and β-phase crystals.     

Fluctuation of Global Gene Expression by Endogenous miRNA Response to the Introduction of an Exogenous miRNA

Most of the intracellular endogenous microRNAs (endo-miRNAs) are considered to be saturated in Argonaute (Ago) proteins in the RNA-induced silencing complexes (RISCs). When exogenous miRNAs (exo-miRNAs) are introduced into cells, endo-miRNAs in the RISC may be replaced with exo-miRNAs or exo-miRNAs, and endo-miRNAs might also compete for the position in the newly synthesized RISC with each other. This would lead to the fluctuation of global gene expression not only by repression of exo-miRNA target gene expression, but also by the increase of the endo-miRNA target gene expression. In the present study, we quantified the changes in the expression levels of target genes of exo-miRNA and endo-miRNA in the cells transfected with fifteen different exo-miRNAs by microarray experiments. Different exo-miRNAs increased ratios of expression levels of target genes of a given endo-miRNA to different extents, suggesting that the replacement efficiencies might differ according to the exo-miRNA types. However, the increased ratios in the expression levels of each endo-miRNA target genes by the transfection of any particular exo-miRNA were mostly equivalent, suggesting that the endo-miRNAs present in the RISC might be replaced with excessive exo-miRNAs at similar levels, probably because they exist in single-stranded forms in the RISC.     

On the electrochemical activation of alkali-treated soft carbon for advanced electrochemical capacitors

The electrochemical activation process of the so-called “alkali-treated soft carbon” (ASC) has been examined in organic electrolyte solutions. SEM observation demonstrated that the edge plane of graphene structure of the ASC particle becomes rough after the activation, and XRD measurements indicated that the average lattice constant of graphene stacking in ASC increases after the activation process. Ex-situ ⁷Li NMR measurements proved that the insertion of cation (Li⁺) into the pore structure of ASC is associated with the activation process in the electrolyte dissolving Li salt. The pore-size distribution determined from N₂-gas adsorption for ASC electrodes before and after the electrochemical activation indicates that the pore structure becomes developed after the electrochemical polarization, especially in the pore-diameter range of 2–10 nm. A schematic model of the activation process has been presented, which includes electrochemical insertion of ions into the inside of the ASC.     

Development of an image evaluation method for skin color distribution in facial images and its application: Aging effects and seasonal changes of facial color distribution

In this article, we present an evaluation method for the skin color distribution in the face area. Unlike previous methods that extract a specific area, our method subdivides the entire face into small regions and analyzes detailed, per-frame textures. Our evaluation method for skin color distribution is based on facial feature points and includes segmentation that takes into account the facial skeleton and muscle orientation. The use of facial feature points enables a comparison at relatively equal positions on the face without depending on the shape or size of the individual's face. Our evaluation method is versatile, and as an application, we clarified age-specific features and seasonal variations of facial color distribution. As a result of applying this evaluation method to the facial images of women aged 20 to 78 years, we confirmed that the lightness of the face decreased as age increased. In particular, the decrease in lightness was remarkable in the region along the cheekbone, from the temple to the center of the cheek. Furthermore, we analyzed the seasonal changes of melanin distribution in the face area. This showed that the melanin index increased particularly in the cheekbone area in the summer when the influence of ultraviolet rays became large. Our novel methodology and the data presented in this article will be useful in various fields, such as dermatology, cosmetics, and computer vision.