Determination of acrylamide in processed foods by LC/MS using column switching

An LC/MS method was developed for the determination of acrylamide (AA) in processed or cooked foods. AA was extracted with a mixture of water and acetone from homogenized food samples after the addition of 13C-labeled acrylamide (AA-1-(13)C) as an internal standard. The extract was concentrated, washed with dichloromethane for defatting, and cleaned up on Bond Elut C18, PSA and ACCUCAT cartridge-columns, and then AA was determined by LC/MS in the selected ion recording (SIR) mode. For the LC/MS analysis, four LC columns were connected in-line and the flow of the mobile phase was switched according to a time-program. Monitoring ions for AA were m/z 72 and 55, and those for AA-1-(13)C were m/z 73 and 56. AA and AA-1-(13)C were determined without interference from the matrices in all samples. The recoveries of AA from potato chips, corn snack, pretzel and roasted tea spiked at the level of 500 ng/g of AA were 99.5-101.0% with standard deviations (SD) in the range from 0.3 to 1.6%. The limits of detection and quantification of the developed method were 9 and 30 ng/g for AA in samples, respectively. The method was applied to the analysis of AA in various processed or cooked food samples purchased from retail markets. High levels of AA were found in potato chips and French-fried potato (467-3,544 ng/g). Fried and sugar-coated dough cakes (karinto) contained 374 and 1,895 ng/g. Corn snacks contained 117-535 ng/g of AA. Roasted foods (such as roasted sesame seed, roasted barley (mugi-cha), roasted tea (hoji-cha), coffee beans and curry powder) contained 116-567 ng/g of AA. Foods made from fish, egg and meat contained lower levels of AA than the plant-based foods. Foods containing much water showed a tendency to have low levels of AA compared with dry foods. The proposed method was applicable to the analysis of AA in variety of processed foods.     

In vivo assessment of the corrosion of nickel–titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy

This study was undertaken to assess in vivo the corrosion in two commercial nickel–titanium (NiTi) orthodontic archwires removed from the oral cavity of patients using fluoride mouthwashes. Five volunteers took part in this study on the corrosion behavior of two brands of NiTi archwires (3M and AO (brand of archwire)) during use of two mouthwashes with neutral sodium fluoride 1.1%, one with acidulated fluoride 1.1%, and one with placebo and a control group. Each patient used one mouthwash in three different periods of time for 1 min a day for 30 days. The archwires were assessed with scanning electron microscopy and atomic force microscopy for qualitative and quantitative analysis. The values obtained with atomic force microscopy (AFM) were submitted to normality test, two‐way analysis of variance, and Tukey's test at a significance level of 5%. The AFM images showed a gradual qualitative increase in the roughness of both types of wire between the treatments: control < placebo < neutral fluoride < acidulated fluoride. The arithmetic average of the roughness and root mean square of the roughness were similar. As for 3M archwires, only the acidulated fluoride group differed statistically from the others. As for AO archwires, the control and placebo groups did not differ from each other, but differed from the other fluoride treatments. The group using neutral fluoride also differed significantly from the acidulated fluoride group. 3M archwires were not affected by daily oral challenges. AO archwires were not affected by daily oral challenges either; their association with fluoride, either neutral or acidulated, increased their roughness.     

Frequency stabilization of GaAlAs laser using a Doppler-free spectrum of the Cs-D2line

Experimental results are shown on the frequency stabilization of a GaAlAs laser using a Doppler-free spectrum in the saturated absorption of the Cs-D2line at 852.1 nm. The frequency stability (Allan variance) between3.0 times 10^{-12}and1.0 times 10^{11}was obtained at the averaging time between 0.1 and 1000 s.     

Subharmonic synchronous and hybrid mode-locking of a monolithic DBR laser operating at millimeter-wave frequencies

A detailed comparison of subharmonic synchronous and subharmonic hybrid mode-locking of a monolithic distributed Bragg reflector (DBR) laser operating at 33 GHz is presented. Optical injection at the 20th subharmonic frequency (1.65 GHz) has produced a locking range of 10 MHz with negligible amplitude modulation. In comparison, electrical injection at the 4th subharmonic frequency (5.83 GHz) has shown higher levels of amplitude modulation and a narrower locking range (4 MHz). While subharmonic hybrid mode-locking remains a simple and cost effective solution for the generation of low timing jitter high-repetition rate optical pulse trains, subharmonic synchronous mode-locking shows superior performance with regard to reduced amplitude modulation and larger locking range.     

A reconstruction algorithm from truncated projections

A new tomographic reconstruction method is proposed which permits the reconstruction of a region of interest within a slice from partially truncated scanning data. This method utilizes two types of source data, namely a series of truncated projections and the outline of the object's cross section. The principle of this algorithm is to estimate the outside area of truncation in one projection from the projection data of the other viewing angles and the outline data of the object. The above estimation is accomplished by following two repeated procedures: 1) the modification of the calculated projection data compared each time with the already measured projection data of the truncated area, and 2) the modification of the reconstructed image compared also each time with the shape of the object. Computer simulation shows the convergence of the results obtained by this algorithm thus verifying its validity, and a reconstructed image after iterative processes exhibits good quality.     

Quantum Transport Simulation of Silicon-Nanowire Transistors Based on Direct Solution Approach of the Wigner Transport Equation

In this paper, we present a self-consistent and 3D quantum simulator for Si-nanowire transistors based on the Wigner function model and multidimensional Schrodinger-Poisson algorithm. To achieve a sufficient numerical accuracy for calculating subthreshold current, we introduced a third-order differencing scheme for discretizing the drift term in the Wigner transport equation. By comparing with semiclassical Boltzmann and nonequilibrium Green's function approaches, the validity of the present simulator is confirmed. We also demonstrate that the source-drain tunneling is a critical physical phenomenon related to a scaling limit of nanowire devices, and the semiclassical simulation measurably underestimates a minimum gate length.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Synthesis and Self-Organization of Fluorene-Conjugated Bisimidazolylporphyrin and Its Optical Properties

A conjugated-bisimidazolylporphyrin bridged by bis(ethynylfluorene) was synthesized and organized into linear polymer through self-coordination having mean molecular weights, M_w and M_n, of ~2.1 × 10⁵ Da and ~1.6 × 10⁵ Da, respectively. A large two-photon absorption cross section value of 3.4 × 10⁵ GM (per dimer unit) was observed. This value was comparable to that of the previously reported self-assembled linear polymer consisting of butadiyne-bridged imidazolylporphyrins. The two-photon absorption properties could be controlled by tuning the wavelength and absorption intensity of the one-photon absorption.