Alloying effects on the hydride formation of Zr(Mn1−xCox)2

To study the alloying effects on ZrMn₂-H system, thermodynamic properties of Zr(Mn_1−xCo_x)₂ hydride were measured by volumetric method. ZrMn₂ gave a single plateau region in the pressure-composition isotherm. On the other hand, double plateaus were clearly observed in Zr(Mn_0.7Co_0.3)₂ and Zr(Mn_0.6Co_0.4)₂-H systems. The appearance of the double plateau characteristics would be explained in view of the hydrogen binding in the tetrahedral occupation sites in Zr(Mn_1−xCo_x)₂. Since the hydrogen binding in the tetrahedral 2ZrMnCo site would be less stable than that in the 2Zr2Mn site, the equilibrium pressure increases with increasing cobalt content. The appearance of the first plateau was ascribed the increase in the bonding of Mn-H in 2Zr2Mn site adjoining the 2ZrMnCo site.     

X-ray absorption near-edge structure study on positive electrodes of degraded lithium-ion battery

18650-type cylindrical cells using LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) and hard carbon as positive and negative electrode material, respectively, were fabricated and degraded by cycle tests. The capacity of the cells remained more than 95% and 85% after cycle tests at 25 and 50 °C, respectively. After the cycle tests, Li-deficient cubic phase was observed on the surface of NMC. This phenomenon should be related to the degradation mechanism of this type of cell.     

Fe content effects on electrochemical properties of Fe-substituted Li2MnO3 positive electrode material

Fe-substituted Li₂MnO₃ including a monoclinic layered rock-salt structure (C2/m), (Li_1+x(Fe_yMn_1−y)_1−xO₂, 0 < x < 1/3, 0.1 ≤ y ≤ 0.5) was prepared by coprecipitation-hydrothermal-calcination method. The sample was assigned as two-phase composite structure consisting of the cubic rock-salt () and monoclinic ones at high Fe content above 30% (y ≥ 0.3), while the sample was assigned as a monoclinic phase (C2/m) at low Fe content less than 20%. In the monoclinic Li₂MnO₃-type structure, the Fe ion tends to substitute a Li (2b) site, which corresponds to a center position of Mn⁴⁺ hexagonal network in Mn-Li layer. The electrochemical properties including discharge characteristics under high current density (<3600 mA g⁻¹ at 30 °C) and low temperature (<−20 °C at 40 mA g⁻¹) were severely affected by chemical composition (Fe content and Li/(Fe + Mn) ratio), crystal structure (monoclinic phase content) and powder property (specific surface area). Under the optimized Fe content (0.2 < y < 0.4), the Li/sample cells showed high initial discharge capacity (240-300 mAh g⁻¹) and energy density (700-950 mWh g⁻¹) between 1.5 and 4.8 V under moderate current density, 40 mA g⁻¹ at 30 °C. Results suggest that Fe-substituted Li₂MnO₃ would be a non-excludable 3 V positive electrode material.     

Low-dose exposure energy-resolved X-ray computed tomography using a contrast agent with a high-energy K-edge

X-ray computed tomography (CT) with iodine contrast agent is widely employed to locate cancers. However, this method has shortcomings such as high-radiation dose exposure, iodine side effects, and a beam hardening effect. We have been working on the energy-resolved CT measurement method using a novel X-ray detection system, the “transXend” detector, which measures X-rays as electric currents and gives the energy distribution of incident X-rays after analysis. In the present study, we propose a method for low-dose exposure CT that involves the combination of the energy-resolved CT method, which is free from the beam hardening effect, and a harmless contrast agent with high-energy K-edge absorption, such as gold nanoparticles expected as a future contrast agent. Comparisons of radiation dose exposures as functions of aluminum filter thickness at the exit aperture of an X-ray tube and the K-edge energies of contrast agents are described.     

Electrophoretic cell manipulation and electrochemical gene-function analysis based on a yeast two-hybrid system in a microfluidic device

A novel microfluidic device with an array of analytical chambers was developed in order to perform single-cell-based gene-function analysis. A series of analytical processes was carried out using the device, including electrophoretic manipulation of single cells and electrochemical measurement of gene function. A poly(dimethylsiloxane) microstructure with a microfluidic channel (150 microm in width, 10 microm in height) and an analytical chamber (100 x 20 x 10 microm (3)) were fabricated and aligned on a glass substrate with an array of Au microelectrodes. Two microelectrodes positioned in the analytical chamber were employed as a working electrode for the electrophoretic manipulation of cells and electrochemical measurements. A yeast strain ( Saccharomyces cerevisiae Y190) carrying the beta-galactosidase reporter gene was used to demonstrate that the device could detect the enzyme. Target cells flowing through the main channel were introduced into the chamber by electrophoresis using the ground electrode laid on the main channel. When the cell was treated with 17beta-estradiol, gene expression was triggered to produce beta-galactosidase, catalyzing the hydrolysis of p-aminophenyl-beta- D-galactopyranoside to form p-aminophenol (PAP). The enzymatically generated PAP was detected by cyclic voltammetry and amperometry at the single-cell level in the chamber of the device. Generator-collector mode amperometry was also applied to amplify the current response originating from gene expression in the trapped single cells. After electrochemical measurement, the trapped cells were easily released from the chamber using electrophoretic force.     

A method for dispersing dry nano-sized particles in a liquid using carrier particles

A method for dispersing dry particles in a liquid is described. The method involves coating large carrier particles with fine particles. When two types of particles having different sizes are mixed in dry conditions, the particles adhere to one another, and the large particles become coated with small particles. When the large core particles are coated with a mono-layer of small particles, further agglomeration is inhibited. Because the single small particles generated by the disruption adhere to the core particles, we presumed that, if the small particles that are adhered to large particles could be separated from the large particles by a sonication in a liquid, the dry fine particles could be dispersed in a liquid.The dispersion experiments conducted using spherical silica particles having a count median diameter D_p50 of 74 nm as small particles and spherical glass beads as large particles. In this situation, the large particles carry the small particles from a dry condition into a liquid. We refer to the large particles as carrier particles. The experiments revealed that the proposed dispersion procedure results in a superior product, compared to sonication only. The effect of carrier size on dispersion performance is also investigated. The findings indicate and an optimum carrier size exists. Observations of the carrier particle surfaces after dry mixing indicate that the optimum condition is the condition at which a mono-layer of Silica particles is formed.     

The Inhibitory Role of Rab11b in Osteoclastogenesis through Triggering Lysosome-Induced Degradation of c-Fms and RANK Surface Receptors

Rab11b, abundantly enriched in endocytic recycling compartments, is required for the establishment of the machinery of vesicle trafficking. Yet, no report has so far characterized the biological function of Rab11b in osteoclastogenesis. Using in vitro model of osteoclasts differentiated from murine macrophages like RAW-D cells or bone marrow-derived macrophages, we elucidated that Rab11b served as an inhibitory regulator of osteoclast differentiation sequentially via (i) abolishing surface abundance of RANK and c-Fms receptors; and (ii) attenuating nuclear factor of activated T-cells c1 (NFATc-1) upstream signaling cascades, following RANKL stimulation. Rab11b was localized in early and late endosomes, Golgi complex, and endoplasmic reticulum; moreover, its overexpression enlarged early and late endosomes. Upon inhibition of lysosomal function by a specific blocker, chloroquine (CLQ), we comprehensively clarified a novel function of lysosomes on mediating proteolytic degradation of c-Fms and RANK surface receptors, drastically ameliorated by Rab11b overexpression in RAW-D cell-derived osteoclasts. These findings highlight the key role of Rab11b as an inhibitor of osteoclastogenesis by directing the transport of c-Fms and RANK surface receptors to lysosomes for degradation via the axis of early endosomes-late endosomes-lysosomes, thereby contributing towards the systemic equilibrium of the bone resorption phase.