DC drift of Z-cut LiNbO/sub 3/ modulators

DC drift characteristics of z-cut LiNbO/sub 3/ modulators with oxide buffer layers were studied with respect to their acceleration factors and long-term reliability. Analysis of more than 120 data points of measured drift tests indicate a slight nonlinear contribution by the starting bias voltage Vs to drift acceleration, with a factor equal to Vs/sup 1.27/. However, the observed nonlinearity is shown to have little affect on reliability estimations due to a dominant contribution from temperature activation energy; Ea=1.1 eV. The dc drift failure rates are estimated to be on the order of tens of failures in time for 20 years at 55/spl deg/C.     

Synthesis and electrochemical properties of an oxide electrode layer prepared by a new electroless plating technique

A lanthanum strontium manganese thin oxide layer was plated on yttria stabilized zirconia by oxidizing the lanthanum strontium manganese ions with hydrogen peroxide as the oxidant. The plated oxide layer was firmly adherent to the substrate, and its morphology was finely porous. The crystal phase of the oxide was determined by XRD to be a perovskite-type. The mechanism for the oxide layer formation by an oxide electroless plating was studied by means of ESCA. As a cathode of solid oxide fuel cell (SOFC), the electrode characteristics of an oxide plated in this way were measured by the current interruption method at 1000° C. The cathodic overpotential of this electrode was less than 40 mV at 1 A cm^–2 This small overvoltage was considered to be based on an effective large electrode reaction area.     

SAW velocity measurement of crystals and thin films by the phasevelocity scanning of interference fringes

We present principle and application of a novel noncontact velocity measurement of surface acoustic waves (SAW) on crystals and thin films using laser interference fringes scanned at the phase velocity of SAW. The scanning interference fringes (SIF) are produced by intersecting two laser beams with a frequency difference. The SAW velocity within the laser beam spot is measured as the ratio of observed SAW frequency and predetermined wave number of the SIF. The frequency measurement can be quite precise because of a large number of generated SAW carriers and amplitude enhancement effect. The SAW velocity measurement is free from the water loading effect accompanying the leaky SAW measurements. This principle was successfully applied to evaluate Si ₃N₄ and SiO₂ films deposited on Si (001) surface     

Anastomosis of the left juxtaposed atrial appendages in a patient with tricuspid atresia

A 9-month-old boy with left juxtaposition of the atrial appendages, tricuspid atresia, pulmonary atresia, and ventriculoarterial discordance underwent anastomosis between the atrial appendages after failure of balloon/blade atrial septostomy because of restrictive atrial septal defect. For surgical creation of atrial communication in patients with juxtaposed atrial appendages, anastomosis between the atrial appendages seemed to be safer, more effective, and less invasive than septectomy by Blalock-Hanlon technique or inflow occlusion technique.     

The measurement of water vapour pressure in an SOFC anode during discharge

By placing a galvanic-type steam sensor on the fuel electrode of a solid oxide fuel cell, water vapour pressure in the anode during discharge was successfully measured. The change in steam concentration in the anode, which was calculated from the e.m.f. of the sensor, was compared with the variation of anodic overvoltage measured by the usual d.c. interruption method. As a result, the water vapour pressure was confirmed to increase as the discharge current increased, and most of the anodic overvoltage could be ascribed to the hydrogen concentration overvoltage.     

Building a CIM system for compound plant: Utilization of distributed processing system

The position of a production management system in a computer-integrated manufacturing (CIM) system is to serve as the nucleus of the plant CIM system that connects the plant production to other departments such as marketing, research and development, and distribution departments. A production management system that integrates the flow of goods with information in a plant, and thus manages production in it, was developed as the first step toward application of CIM to a powder plant. The method of building a distributed system is one way to build a CIM system. This method creates a system in the required function units, which are connected by a network to expand the system function. It offers advantages in extensibility, flexibility, and rapid implementation.     

Effect of KCA-098, a new benzofuroquinoline derivative, on bone mineral metabolism

The effect of 3,9-bis(N,N-dimethylcarbamoyloxy)-5H-benzofuro[3,2-c]quinoli ne-6-one designated as KCA-098) on the bone mineral metabolism of chick embryonic bone was examined. KCA-098 dose-dependently inhibited bone resorption of cultured chick embryonic femora and calvariae. It increased the length, dry weight, and calcium and phosphorus contents of 9-d-old chick embryonic femurs cultivated for 6 d, indicating that it stimulated bone formation. These results show that KCA-098 has the unique effects of inhibiting bone resorption and stimulating bone formation of chick embryo. In addition, in an in vivo experiment, oral administration of KCA-098 (3.0 mg/kg/d) for 16 weeks led to an increase in calcium and phosphorus content as well as an increase in the amount of force required to break the femur from ovariectomized rats, suggesting that it may be useful for the treatment of bone diseases.