Properties of poly(vinyl chloride) fibers crosslinked by 2-dibutylamino-4,6-dimercapto-1,3,5-triazine

PVC fibers, fastened to a needle frame, were crosslinked by 2-dibutylamino-4, 6-dimercapto-1,3,5-trizine in the presence of tetra-n-butylammonium bromide and alkali in water at 96°C. Solvent resistance, characterized by the gel fraction of THF, improves markedly. Mechanical properties of the fibers investigated by tensile tests at 20°C show that both the modulus and tensile strength at break increase, while elongation at break decreases over 40% gel content. Creep tests indicate that the resistance to heat deformation improves by crosslinking. The heat distortion temperature increases by 12°C at 75% gel content. Results of dynamic tests show that the T_g of PVC fibers determined by a peak in the loss modulus (E'') increases from 40% gel content. Dynamic modulus (E') increases by 74% at 23°C and the T_g by 37°C in the case of crosslinked PVC fibers having a 92% gel content. The shrinkage of PVC fibers in hot water at 94°C for 30 min decreases more than 50% over 75–80% gel content indicating the improved resistance to heat deformation.     

Simultaneous determination of dissolved organic carbon and phosphorus in waters using flame ionization and photometric detectors

An apparatus with flame ionization and photometric detectors was assembled for the simultaneous determination of dissolved organic carbon (DOC) and phosphorus (DP) in waters. The optimum operating conditions were described. The long-term precision (relative standard deviation) is 5.8% for DOC and 5.2% for DP. The detection limits are 0.09 μg ml⁻¹ for DOC and 0.03 μg ml⁻¹ for DP. The responses for various DOC and DP compounds agreed almost with those obtained by combustion-infrared and persulfate digestion-colorimetric methods, respectively. DOC and DP in several water samples were determined by this method and other methods, and the results obtained by those methods were discussed.     

A scheduling method considering register‐to‐register transfers

In high‐level synthesis, scheduling is an important stage which assigns each operation appearing in a data flow graph to a specific control step, whose results influence the design quality directly. This paper describes a scheduling approach for pipelined datapaths. Since few previous approaches estimate the interconnection cost between register (register‐to‐register cost), our approach introduces a datapath model with interconnection between registers across buses, and minimizes the total hardware cost including the register‐to‐register cost by force‐directed scheduling. © 1999 Scripta Technica, Electr Eng Jpn, 128(3): 63–71, 1999     

Effect on adhesion of new polymerization initiator systems comprising 5‐monosubstituted barbituric acids,aromatic sulfinate amides,and tert‐butyl peroxymaleic acid in dental adhesive resin

To develop a multipurpose dental adhesive resin, the effects of polymerization initiator systems comprising 5‐monosubstituted barbituric acid (5‐MSBA), aromatic sulfinate amide (ASA), and tert‐butyl peroxymaleic acid (t‐BPMA) with 4‐acryloxyethyltrimellitic acid (4‐AET) or its anhydride (4‐AETA) on adhesion and curing time were investigated. Tensile bond strength values of a Ni Cr alloy are affected by the inclusion of t‐BPMA, and the optimum concentration of t‐BPMA in a 5‐MSBA–ASA–t‐BPMA‐type initiator system was found to be 0.5–2.0 wt %, and it was noteworthy that the correlation between the tensile bond strength and curing time on the t‐BPMA‐concentration showed a highly negative correlation of a benzenesulfinate morphoride (BSMo) series adhesive: r = −0.957, and a p‐toluenesulfinate morphoride (p‐TSMo) series adhesive: r = −0.949. The combination of 1‐cyclohexyl‐5‐ethylbarbiturioc acid (CEBA) with ASA provides a high level of tensile bond strength to the Ni Cr alloy, and the optimum concentration of CEBA in a CEBA–ASA–t‐BPMA‐type initiator and the bond strength values were found to be 0.75 wt % CEBA: 52.3 MPa (with BSMo), and 1.0 wt % CEBA: 50.9 MPa (with p‐TSMo), respectively. It was suggested that 5‐MSBA, ASA, and t‐BPMA and their combinations provided the environment where 4‐AETA exhibited good bonding performance with increasing wettability to metal without interference of a charge‐transfer complex derived from a polymerization initiator system such as benzoyl peroxide (BPO)–amine. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1655–1668, 1999     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

1-O-alkyl-2,3-diacylglycerols in the skin surface lipids of the hairless mouse

A neutral lipid class was isolated by thin-layer chromatography from the skin surface lipids of the hairless mouse. The fraction migrated faster than triglycerides and had a migration rate similar to that of diacyl alkanediols (diester wax). Upon deacylation, however, the long-chain diols were identified as 1-alkylglycerol ethers based on their chromatographic properties and on the mass spectra of their nicotinylidene derivatives. Thus, the skin lipid fraction was identified as 1-O-alkyl-diacylglycerol. The alkyl moieties were all saturated and even-numbered and ranged in chainlength from C₁₆ to C₂₂ with 1-O-hexadecylglycerol amounting to 34% of the total glycerol ether moieties. The fatty acids derived from this lipid fraction were mostly monoenoic with chainlengths ranging from C₁₆ to C₂₄. The major acyl component was eicosenoic acid (20∶1) representing 61% of the total fatty acids.     

The interaction between co-polymer of vinylpyrrolidone and vinylacetate and anionic surfactants in aqueous solutions

The interaction of co-polymers of vinylpyrrolidone-vinylacetate with anionic surfactants, such as lithium dodecyl sulfate (LiDS), lithium perfluorooctane sulfonate (LiFOS) in aqueous solution, has been studied. When the content of vinylacetate in the co-polymers increases, reduction in the surface tension of co-polymers alone becomes significant. In mixtures of co-polymers and surfactants, co-polymer-LiFOS complexes are formed at lower surfactant concentration than that of co-polymer-LiDS. The micropolarity of the co-polymers-surfactant complexes depends on the composition of co-polymers and is higher for co-polymer-LiFOS than that for co-polymer-LiDS. Further, the solubilization behavior of α-(o-tolylazo-)-β-naphthylamine (Yellow OB) (Tokyo Kasei Co., Ltd., Tokyo, Japan) in the co-polymer-surfactant complexes is almost independent of the co-polymer composition, but different from the surfactants, where a very low solubilized amount of Yellow OB is observed for co-polymer-LiFOS.     

Dehydration of d-glucose in high temperature water at pressures up to 80 MPa

Reaction of d-glucose in water to yield 5-hydroxymethylfurfural (5-HMF), 1,2,4-benzenetriol (BTO) and furfural was studied at high temperatures (up to 400 °C) and high pressures (up to 80 MPa) using a continuous flow reactor. Maximum temperature and pressure conditions gave maximum furfural yield. Increasing pressure from 40 to 70 and 80 MPa enhanced dehydration reactions to 5-HMF, but also enhanced hydrolysis of 5-HMF leading to the production of BTO and thus lead to lower yields of 5-HMF (below 10%). Remarkably, the dehydration reaction to 5-HMF and the hydrolysis of 5-HMF were both enhanced by the increase in water density at 400 °C.     

Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

A neodymium-doped yttrium-aluminum garnet (Y₃A1₅O₁₂, YAG) (Nd:YAG) ceramic that contained 0.3–4.8 at.% neodymium additives and exhibited nearly the same optical properties as those of a single crystal was fabricated by a solid-state reaction method using high-purity powders. Although the integrated absorption intensity of the ²H_9/2+⁴F_5/2 bands simply increased as the neodymium concentration in the YAG ceramics decreased, the fluorescence intensity of the 2.4 at.% Nd:YAG ceramic was the strongest among Nd:YAG ceramics with various neodymium concentrations and a 0.9 at.% Nd:YAG single crystal. An oscillation experiment was performed on a continuous-wave (cw) laser with a diode-laser exciting system using those ceramics and the single crystal. The oscillation threshold and slope efficiency in that analysis were 309 mW and 28%, respectively, for the 1.1 at.% Nd:YAG ceramics and 356 mW and 40%, respectively, for the 2.4 at.% Nd:YAG ceramics. The lasing characteristics of the ceramics in the present work were superior to those of a 0.9 at.% Nd:YAG single crystal that was fabricated by the Czochralski (Cz) method.     

Determination of particulate organic carbon in waters by the chemical oxidation method

Particulate organic carbon (POC) in waters was determined by chemical oxidation method which has been widely used for the determination of total organic carbon and/or dissolved organic carbon. In this method, a water sample was filtered through a filter paper and the paper was placed in a glass ampoule, followed by the determination of POC with a total carbon analyzer. This paper discussed the problems of carbon contamination dissolving from filter papers. The selection of filter papers, the carbon blank values resulting from the papers and the pretreatment of the papers were studied. It became clear that the glass-fiber filter paper pretreated at 500°C for 8 h was superior to the filter papers treated under other conditions. The POC's in waters were determined by this method, and the results agreed well with those obtained by an ordinary dry combustion method.