In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

PbTiO3–PbO–SiO2 Glass-Ceramic Thin Film by a Sol–Gel Process

PbTiO₃(PT)-PbO-SiO₂ glass-ceramic thin films were pro-duced by a sol-gel process. The crystallization of PT oc-curred at ∼700°C and was higher than that in PT-PbO-B₂ O₃ sol-gel glass-ceramics. A pinhole-free thin film was obtained by a rapid thermal annealing process when the designed glass-forming phase content in the thin film was >24 vol%. The measured dielectric constants of the films fairly agreed with the predicted values, based on a parallel mixing model. The dielectric constant was 219 and the di-electric loss was 0.04 in the 0.6PT-0.4(PbO-SiO₂) film that was fired at 700°C.     

Structure and properties of injection‐molded polypropylenes with different molecular weight distribution and tacticity characteristics

Two series of polypropylenes with different molecular weight distribution and tacticity characteristics were injection molded into flexural test specimens by varying cylinder temperature and the effects of the molecular weight distribution and tacticity on the structure and properties of the moldings were studied. Measured propertied were flexural modulus, flexural strength, heat distortion temperature, Izod impact strength, and mold shrinkage and structures studied were crystallinity, the thickness of skin layer, a*‐axis‐oriented component fraction and crystalline orientation functions. The relations between the structures and properties were also studied. It was found that the molecular weight distribution and tacticity characteristics affect the properties mainly through the molecular orientation and crystallinity, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2142–2156, 2002     

Aqueous solution properties of a silicone surfactant and its mixed surfactant systems

The aqueous solution properties of a nonionic silicone surfactant of dimethylpolysiloxane and its mixed surfactant systems were studied. It was found that the silicone surfactant has a high surface activity and forms micelles in two steps: premicelles in dilute concentrations and polymolecular micelles above 3.7 × 10⁻⁷ mol dm⁻³. In mixed systems of the silicone surfactant with anionic hydrocarbon or fluorocarbon surfactant, weak intermicellar interactions were found. They are due to electrostatic interaction between hydrophilic groups of the respective micelles. Dye solubilization measurements showed that the solubilized amount of Yellow-OB is greater than predicted by ideal systems. Hydrazo-azo tautomerism is observed in fluorocarbon-silicone surfactant systems, while Yellow-OB is solubilized only in the azo-form in the hydrocarbon-silicone surfactant system.     

Rapid and Continuous Hydrothermal Synthesis of Boehmite Particles in Subcritical and Supercritical Water

Hydrothermal synthesis of AlOOH particles from an Al(NO₃)₃ aqueous solution was examined in subcritical and supercritical water. Continuous and rapid production of AlOOH fine particles was achieved by mixing a metal salt aqueous solution with preheated water fed from another line. The effects of temperature, pressure, and initial concentration of solution on the particle size, morphology, and crystal structure of the metal (hydrous) oxides were examined. These properties are strongly affected by slight changes in pressure and temperature. This strong effect is attributed to the large changes in the properties of water near its critical point resulting from the slight changes in pressure and temperature. The results suggest the simultaneous control of size, crystal structure, and morphology of the particles by hydrothermal synthesis in supercritical water.     

木材经催化热分解向BTX和合成燃料的转化

以废木材生物质的有效利用为目的,使用粉粒流化床反应器,对3种木材进行了催化热分解实验,以4种催化效果不同的粒子作为流化床内的流化介质来考察催化热分解过程中介质颗粒、反应气体和热分解温度对产物分布的影响.木材的挥发性物质在700K时就已几乎分解出来,挥发性物质中的轻质芳香烃碳氢化合物（苯、甲苯、二甲苯和萘：BTXN）的收率随着热分解温度的升高而增加,1173K下达到3.1%（质量分数）,daf.在氢气气氛下,当作为流化介质颗粒Zn(3%,质量分数)/HZSM-5催化剂对木材进行催化热分解时,853K下可得到6.1%, daf的轻质芳香烃碳氢化合物的收率(BTX 5.5%,daf、萘0.6%,daf).而在活性很高的NiMo-A加氢催化剂下,在863K时,催化热分解产物几乎全为甲烷.     

Research and Development of the Coprecipitation Process for Lanthanum Germanate Oxyapatite

Although lanthanum germanate oxyapatite (La–Ge–O) has shown good potential for use as a solid electrolyte in energy storage applications, its synthesis has been challenging by either solid‐ or solution‐state methods. In this study, a new synthesis of La–Ge–O was developed through a coprecipitation technique, in which a highly concentrated homogeneous aqueous solution of La and Ge was prepared from aqueous ammonium germanate and lanthanum nitrate solutions with the addition of dilute nitric acid. Several precipitates were formed by pH manipulation, including an amorphous material obtained at pH > 3. Compared to the individual precipitation behaviors of the parent compounds, the amorphous precipitate was formed only from the aqueous two‐component mixture, and appeared to contain both metals. This material was transformed into crystalline mixtures upon heating at 1273 K. The crystalline phases were La₂Ge₃O₉ and hexagonal‐type GeO₂ when the precipitate was formed below pH 8, and the La–Ge–O and La₂Ge₂O₇ phases when the precipitate was formed around pH 8. Product formation from the coprecipitate was discussed based on X‐ray diffraction and thermal analyses. The improved availability of La–Ge–O will allow more extensive investigations of its useful properties.     

Biased distribution of the branched-chain fatty acids in ceramides of vernix caseosa

The compositions of ester- and amide-linked fatty acids from ceramides of human vernix caseosa were described with emphasis on the distribution of the branched-chain fatty acid (BCFA). Two novel ceramides were isolated from vernix caseosa in the course of this study: the acylated type of esterified α-OH-hydroxyacid/sphingosine ceramide (Cer[EAS]) and nonacylated type of non-OH fatty acid/hydroxysphingosine ceramide (Cer[NH]). Their chemical structures were identified by nuclear magnetic resonance and chemical procedure. The Cer[EAS] was an acylceramide and consisted of the highest concentrations of ester- and amide-linked BCFA (62 and 67%, respectively). The iso- or anteiso-branching structures of the aliphatic chains were confirmed by the mass spectra of their picolinyl or pyrrolidide derivatives. As a whole, amide-linked fatty acids of ceramides 1–7 and Cer[NH] were normal types of straight-chain fatty acids with or without α- or ω-hydroxylation. The BCFA concentrations of amide-linked fatty acids in these ceramides (ceramides 1–7 and Cer[NH]) were low and less than 10%. The BCFA thus occurred exclusively in a novel acylceramide of Cer[EAS] in the vernix caseosa.     

Adsorption of cationic monomeric and gemini surfactants on montmorillonite and adsolubilization of vitamin E

Adsorption of a cationic gemini surfactant (1,2-bis(dodecyldimethylammonio) ethane dibromide, 12-2-12) and the corresponding monomeric surfactant (dodecyltrimethylammonium bromide, DTAB) on montmorillonite has been characterized with a combination of adsorption isotherm, interlayer spacing and FT-IR spectroscopic data. Adsolubilization of vitamin E into the adsorbed surfactant layers has also been studied. The adsorption isotherm data reveal that the adsorption of the two surfactants is driven by the two factors: one is the cation exchange that occurs on the interlayer basal planes and the other is the hydrophobic interaction between hydrocarbon chains of the surfactants. Although the adsorbed amount measured in the saturation region (in mol g(-1)) is almost identical for the two surfactants, the conformation of the intercalated surfactant molecules differs significantly from each other. The adsorption of DTAB results in a lateral bilayer arrangement in the limited interlayer space, whereas 12-2-12 gives a normal bilayer arrangement in the expanded interlayer space. Adsolubilization of vitamin E takes place into the adsorbed surfactant layers, and interestingly, all the vitamin E molecules added in the montmorillonite suspensions are hybridized at lower surfactant concentrations due to the great specific surface area of the clay material. Since the maximum adsolubilization amount is usually obtained just below the critical micelle concentration, the gemini surfactant is deemed to be more efficient than the corresponding monomeric one to achieve the great adsolubilization amount.     

Methanol decomposition to synthesis gas over supported Pd catalysts prepared from synthetic anionic clays

Supported Pd or Rh catalysts were prepared by the solid-phase crystallization method starting from hydrotalcite anionic clay minerals based on [Mg₆Al₂(OH)₁₆CO ₂ ²⁻ ]·4H₂O as the precursors. The precursors were prepared by a coprecipitation method from the raw materials containing Pd²⁺ and various trivalent metal ions which can replace each site of Mg²⁺ and Al³⁺ in the hydrotalcite. Rh³⁺ was also used for preparing the catalyst as comparison. The precursors were then thermally decomposed and reduced to form supported Pd or Rh catalysts and used for the methanol decomposition to synthesis gas. Among the precursors tested, use of Mg–Cr hydrotalcite containing Pd²⁺ resulted in the formation of efficient Pd supported catalysts for the production of synthesis gas by selective decomposition of methanol at low temperature. Although Pd²⁺ cannot well replace the Mg²⁺ site in the hydrotalcite, the Pd supported catalyst (Pd/Mg–Cr) prepared by the solid-phase crystallization method formed highly dispersed Pd metal particles and showed much higher activity than that prepared by the conventional impregnation method. When the precursor was prepared under mild conditions, more fine particles of Pd metal were formed over the catalyst, resulting in high activity. It is likely that the high activity may be due to the highly dispersed and stable Pd metal particles assisted by the role of Cr as the co-catalyst. This revised version was published online in November 2006 with corrections to the Cover Date.