Ergonomics solution for crossing collisions based on field assessment of visual environment at urban intersections in Japan

This paper aims to assess quantitatively the actual visual environment of uncontrolled urban downtown intersections in Japan in relation to frequently occurring crossing collisions and to discuss the safety countermeasures for them. In Field Study 1 dealing with direct visibility, our ultra-wide-angle photograph analysis revealed that most of the right/left-ward visible range at 11 intersections were insufficient to check safety, and the quality of direct visibility was closely associated with causing crossing collisions. The countermeasures to reduce a blind area were determined to be a top priority. In Field Study 2 dealing with indirect visibility, more than half of the 25 traffic convex mirrors had marked shortcomings for preventive safety, and ergonomics guidelines ensuring indirect visibility were proposed for installing traffic convex mirrors. Low-cost/low-technology-oriented countermeasures are highly recommended to obtain clear/sufficient images of crucial information satisfying drivers' requirements on traffic convex mirrors in accordance with those ergonomics guidelines was highly recommended. Crossing collisions could be prevented by improvement of poor direct and indirect visibility.     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Design and evaluation of robot patient for nursing skill training in patient transfer

We developed a robot patient for patient transfer training for simulating a patient’s performance during patient transfer and for enabling nurses to practice their nursing skills on it. To realize the robot patient, we focused on addressing the problems of designing its limb actions to enable it to respond to nurses’ operations. RC servos and electromagnetic brakes were installed in the joints to enable the robot to simulate a patient’s limb actions, such as embracing and remaining standing. To enable the robot to automatically respond to nurses’ operations, an identification method for these operations was developed that used voice commands and the features of the limbs’ posture measured by angle sensors installed in the robot’s joints. The robot patient’s performance was examined by a control test in which four experienced nursing teachers performed patient transfer with the robot patient and a human-simulated patient. The results revealed that the robot patient could successfully simulate the actions of a patient’s limbs according to the nursing teachers’ operations and that it is suitable for nursing skill training.     

Preparation of novel porous solids from alumina-pillared fluorine micas by acid-treatment

New porous solids from alumina-pillared fluorine micas (APMs), which were obtained from synthetic Na-tetrasilicic fluorine mica [NaMg_2.5Si₄O₁₀F₂], were prepared by sulfuric acid-treatment under mild conditions at 25 °C. The products were investigated by XRD, ICP, SEM, TEM and N₂ adsorption–desorption isotherm at 77 K. XRD measurements indicated that the interlayer pillared structure having a large basal spacing collapsed during the early stages of the acid-treatment. ICP analyses indicated that Al³⁺ and Mg²⁺ ions were leached out from the pillared micas during the acid-treatment. The pore properties of the leached products were found to differ from those of the mother pillared micas: the acid leaching of the pillared micas leads to the formation of mesopores around 3.2 nm in diameter. The correlation between the change in pore properties and cation elution behavior suggests that the mesopore formation results from the leaching of Mg²⁺ ions from the octahedral sheet of the pillared micas. The leached products thus obtained retained the flaky morphology of the mother pillared micas. These results show that the mild acid-treatment using APMs provides a novel route for obtaining unique mesopore solids having the large particle sizes of the mother micas.     

A Nifedipine Coground Mixture with Sodium Deoxycholate. II. Dissolution Characteristics and Stability

Nifedipine is a poorly water soluble drug that demonstrates low bioavailability. In a previous study, a coground mixture of nifedipine with sodium deoxycholate (DCNa), a bile salt, immediately produced colloidal particles when dispersed in water. In this study, the effect of the weight fraction of DCNa, grinding time, dissolution media, and storage conditions on colloidal particle formation in solution was investigated. The coground mixture was prepared with a vibration rod mill, and its solid state was characterized using powder X-ray diffraction. A laser diffraction particle size analyzer was used to determine the particle size distribution curve in water. The size of particles formed in solution decreased with an increase in the weight fraction of DCNa and grinding time. A nifedipine-DCNa (1 : 2 w/w) mixture coground for 30 min was used in the experiments. Colloidal particle formation from the coground mixture was also observed in dissolution media of water and a pH 6.8 buffer solution at 37°C. Most precipitates passed through a filter with a pore size of 0.8 μm, but the particle size distribution in water was different from that in the pH 6.8 buffer solution. DCNa exhibited not only micellar solubilization for drug crystals, but also a retarding effect on drug crystal growth in a supersaturated solution. The latter effect could serve to form colloidal particles in solution. When stored under 75% relative humidity at 40°C for 1 month, the amorphous coground mixture crystallized, and the particle size in water markedly increased. Therefore, the weight fraction of DCNa, grinding time, dissolution media, and humidity during storage influence the dissolution characteristics of nifedipine from a coground mixture.     

Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.     

The effect of excess gate current on input impedance of a JFET amplifier

When JFET is used as an amplifier, it should be regarded that the effect of excess gate current on the input impedance is changed by gain of the amplifier. The input impedance or conductance with gain of the JFET amplifier is experimentally analyzed applying small signal equivalent circuit.     

Stabilization of poly(vinyl chloride). I. Change in color of poly(vinyl chloride) compounded with some metal soaps

Poly(vinyl chloride) (PVC) with one or more metal salts added was colored by the action of heat to investigate the stabilization mechanism. The coloration and the color difference of heated PVC compound films varied according to the metal salt added. The decoloration of the colored compound films was advanced markedly in THF, DMF, acetone, and ammonia. On the other hand, the heated achromatic PVC film containing Cd/Ba soaps underwent an opposite change, from colorless to yellow orange, in the above materials. This means that the coloration of heated compound films may result from the formation of some complex (for example, π complex of the polyene with the metal chloride). Furthermore, the colored film with cadmium stearate was decolored by roll mixing with the colored film containing barium stearate. These results indicate that the stabilization with metal soaps may be founded on a physical phenomenon such aa an effect of complementary color.     

Surgical strategy for abdominal aortic aneurysm with concurrent symptomatic malignancy

In an attempt to improve the guidelines for concurrent management of concomitant abdominal aortic aneurysm (AAA) and symptomatic malignancy, a retrospective study was undertaken. A total of 186 AAA repairs were performed electively, and 25 patients (13.4%) had concurrent symptomatic malignancy from April 1986 to March 1997. Fourteen patients underwent a one-stage operation, including five abdominoperineal rectal resections, four subtotal gastrectomies, three total gastrectomies, and two right hemicolectomies. Eleven others underwent a two-stage operation, including four with total gastrectomy and left hemicolectomy followed by AAA repair, as well as two with right hemicolectomy and one with left hemicolectomy prior to AAA repair. There were no operative deaths or severe postoperative complications. Of the 25 patients, 22 (88.0%) are still alive during follow-up ranging from 8 months to 11 years. Our surgical approach to both lesions is as follows: (1) Using the transperitoneal approach alone, subtotal gastrectomy and abdominoperineal rectal resection can be safely done simultaneously. (2) Although total gastrectomy can also be performed concurrently, the approach used for each lesion is separate. (3) Colorectal resection is generally done separately. However, a one-stage operation can be performed using the thromboexclusion procedure for AAA repair in patients with right-sided colonic cancer or a temporary transverse colostomy for left-sided colorectal cancer.