Sludge depositions in a long tube-high flow MSF test plant

During the operation of a multistage flash (MSF) evaporation plant, a rather rapid decrease was observed in the economy ratio of the plant when the dissolved oxygen (DO) content of the circulating brine was at a high level. This phenomenon was brought about by the reduction of heat transfer coefficients of condenser tubes due to sludge formation on the inside tube surface by the co-precipitation of ferric hydrous oxide with silica, alumina, and organic materials. The chemical analysis of the sludge and circulating brine showed a close relationship to DO values in the brine, the concentration of iron in the sludge, and the decreasing value of the heat transfer coefficient. The lowering of DO was found very effective for avoiding the sludge trouble.     

The effect of excess gate current on input impedance of a JFET amplifier

When JFET is used as an amplifier, it should be regarded that the effect of excess gate current on the input impedance is changed by gain of the amplifier. The input impedance or conductance with gain of the JFET amplifier is experimentally analyzed applying small signal equivalent circuit.     

Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor

Advances in the digital network society require both higher density and higher transfer rates in all sorts of storage systems. Especially in optical recording, the trend toward higher density and larger capacity requires novel surface-recording technologies that can drastically diminish head-to-medium spacing, resulting in an improvement in spatial resolution and, finally, a higher recording density. To this end, we have already proposed a novel contact optical head slider that is able to almost cancel the suspension load by generating hydrodynamic pressure, thus realizing a lower net contact force. Evaluating the dynamic contact force is requisite in realizing its stable sliding operation and higher signal readout performance. In this study, a continuous acoustic emission (AE) signal was utilized to detect the dynamic contact force. AE signal modulation was compared with the applied out-of-plane acceleration on a medium generated by a spindle combined piezo-electric actuator. It was clarified that the detected AE modulation amplitude was approximately proportional to the applied acceleration, and that utilizing AE modulation will be a useful method for evaluating dynamic contact force.     

Preparation and catalytic activity of Au-Pd, Au-Pt, and Pt-Pd binary metal dendrimer nanocomposites

Catalytic activity of Au-Pt, Au-Pd, and Pt-Pd dendrimer nanocomposites for reduction of p-nitrophenol was investigated in water. The bimetallic dendrimer nanocomposites were prepared by simultaneous reduction with sodium borohydride in the presence of poly(amidoamine) (PAMAM) dendrimers with amine and carboxyl terminal groups. Average diameters of the obtained particles were 2-4 nm by transmission electron microscopy. From UV-vis spectroscopy, it was found that the particles were not mixtures of monometallic particles but binary ones. X-ray photoelectron spectroscopy showed that formation of binary composite particles prevents palladium atoms from oxidation. The Au-Pd and Pt-Pd binary particles exhibited higher catalytic activity than monometallic ones. On the other hand, catalytic activity of Au-Pt binary particle was comparable to that of platinum nanoparticles.     

Dependence of transverse spreading velocity of a high-field domain in a GaAs bulk element on the bias electric field

The transverse spreading velocity of a high-field domain, triggered by a pair of capacitive electrodes at the middle of a planar-type GaAs bulk element, was measured as a function of the bias electric field. The results show that the velocity increases from about 108 to 109 cm/s with an increase of the bias electric field from 2.8 to 3.15 kV/cm.     

Improvement in physical properties of poly(vinyl chloride) by radiation-induced graft copolymerization with mixed monomers

Gamma-ray-induced graft copolymerization of butadiene with vinyl monomers onto PVC was attempted to improve the physical properties of PVC. The Izod impact strength was increased from 2 kg·cm/cm² to more than 100 kg·cm/cm² by grafting ca. 10% butadiene. But the tensile strength and melt flow were decreased by the grafting. The electron micrograph showed that the mass of polybutadiene in the graft copolymer had a convenient diameter (0.1–1 μ) for absorbing the impact energy. The weatherability of PVC grafted with butadiene was improved by cografting of butadiene with acrylates and methacrylates which had long side chains.     

Preparation and properties of carbon dental implant with fine rahmen surface layer

Blade- and tooth-root-form carbon dental implants were prepared by fixing fine Rahmen surface (FRS) layers of carbon fabric on a carbon fiber-reinforced carbon (CFRC) core. The fixing was successfully performed through the low-temperature deposition of pyrolytic carbon using cis-1,2-dichloroethylene as the raw material. The resultant implants showed flexural and compressive strength more than 150 and 100 MPa, respectively. The outer part of this FRS layer contained many pores ranging from 30 to 300 μm in diameter and 40–75% in volume fraction.New bone was generated in the open pores after being embedded in the femur of a monkey for 6 months. The shear strength of the embedded implant vs bone interface was 15 MPa. On the other hand, the blade-form FRS implant in the mandible of a monkey gave a locking system consisting of “bone-collagen fiber-calcified layer” after two years under a masticating pressure. The latter is very similar to the natural tooth system.     

Molecular dynamics of DNA and nucleosomes in solution studied by fast-scanning atomic force microscopy

Nucleosome is a fundamental structural unit of chromatin, and the exposure from or occlusion into chromatin of genomic DNA is closely related to the regulation of gene expression. In this study, we analyzed the molecular dynamics of poly-nucleosomal arrays in solution by fast-scanning atomic force microscopy (AFM) to obtain a visual glimpse of nucleosome dynamics on chromatin fiber at single molecule level. The influence of the high-speed scanning probe on nucleosome dynamics can be neglected since bending elastic energy of DNA molecule showed similar probability distributions at different scan rates. In the sequential images of poly-nucleosomal arrays, the sliding of the nucleosome core particle and the dissociation of histone particle were visualized. The sliding showed limited fluctuation within ∼50 nm along the DNA strand. The histone dissociation occurs by at least two distinct ways: a dissociation of histone octamer or sequential dissociations of tetramers. These observations help us to develop the molecular mechanisms of nucleosome dynamics and also demonstrate the ability of fast-scanning AFM for the analysis of dynamic protein–DNA interaction in sub-seconds time scale.