论国有企业激励机制和约束机制的设计

本文通过对建立国有企业激励机制和约束机制的过程中存在的问题进行分析，找出其产生的原因，并尝试提出国有企业激励和约束机制设计思路与对策。     

以设计驱动企业发展

“我们不想通过一点点发展现有的业 务来挣一些小钱，公司需要的是进行创新，研发新产品并提高边际增长率。”[编者按]     

Hydriding and Dehydriding Characteristics of Mechanically Alloyed LaMg_(17) Ni Composite Material

Magnesiumandmagnesiumalloyshavebeenin vestigatedashydrogenstoragematerialsforseveralde cadesbecausefarmorehydrogenbyweightcanbestoredinthemthaninmostoftheothercurrentlyknownhydrogenstoragealloys .Moreover ,thehighnaturalabundanceofMg ,itslightmassandenviron mentalcompatibilitypotentiallymakemagnesiumoneofthemostprospectivecandidatesforfuturehydrogenstoragematerials .Unfortunately ,thepracticalappli cationofMganditsalloyshasbeenlimitedonlytocertainstoragedevicebecauseoftheirpoorhydriding dehydr…     

Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

生活中的慢性杀手--石化合成洗剂

文章回顾了石化合成洗剂的发展历史，从经历的五代产品的发展过程中可以看出它经历了一个环保到不环保再到环保的曲折过程分析了石化合成洗剂的主要成分及其清洗去污的作用原理着重指出目前使用的石化合成洗剂虽然给生活带来便利，但同时也给人体健康和生态环境都造成严重的危害；倡导使用新型环保型的第五代洗剂已成为新世纪中清洗剂发展的必然趋势。     

阻燃沥青的研究进展与建议

介绍了对沥青进行阻燃处理的必要性、沥青的阻燃机理、常用阻燃剂的特性及其作用模式;参照塑料材料阻燃性能的测试手段介绍了常用的沥青材料阻燃性能的测试方法;最后分析了我国沥青阻燃的研究现状,指出了该领域存在的主要问题,并给出了相应的建议。     

Surface-mount dual-loop antenna for 2.4/5 GHz WLAN operation

A surface-mount dual-loop antenna suitable for dual-frequency WLAN operation is presented. For achieving dual-frequency operation with a compact size, the antenna comprises two loop strips of different sizes printed on a flexible printed circuit board, which is then bent and attached onto a foam base of compact size. The antenna shows an attractive feature of high antenna gain, about 4 and 5 dBi for frequencies across the 2.4 and 5 GHz WLAN bands, respectively.     

控制CCL产量的几点分析

研究了如何在不进行设备改造的情况下,提高CCL产量的方法,指出了从四大工序入手是解决问题的关键。     

A compact LTCC branch-line coupler UsingModified-T equivalent-circuit modelfor transmission line

In this letter, a compact branch-line coupler is proposed by making good use of the three-dimensional layout capability of the low-temperature co-fired ceramic (LTCC) substrate. This branch-line coupler is accomplished by using lumped-inductors and lumped-capacitors to realize the modified-T equivalent-circuit model for the transmission line so that the circuit size may drastically be reduced. Specifically, a very compact LTCC branch-line coupler with a size of 0.079/spl lambda//spl times/0.0717/spl lambda/ is implemented and carefully examined, where /spl lambda/ is the wavelength of the multilayer structure at the operating frequency f/sub 0/.     

A push mechanism for GPRS supporting private IP addresses

The General Packet Radio Service (GPRS) provides a packet switched data service for mobile users. However, the existing GPRS specification does not provide the push mechanism and it is difficult to support GPRS services such as call termination (incoming call) for wireless voice over IP (VoIP). Based on the short message service, this paper proposes a push mechanism for GPRS supporting private IP addresses. Our approach does not need to modify the existing GPRS structure.