Effect of solution properties on nanofibrous structure of electrospun poly(lactic‐co‐glycolic acid)

Electrospinning of poly(lactic‐co‐glycolic acid) (PLGA) in chloroform or 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was investigated, focusing on its solution parameters, to develop nonwoven biodegradable nanofibrous structures for tissue engineering. PLGA nanofibers were obtained by electrospinning of 15 wt % PLGA solution and the resulting average fiber diameters were varied with the range of 270–760 nm, depending on solution property. When small amounts of benzyl triethylammonium chloride (BTEAC) was added to the PLGA/chloroform solution, the average diameter was decreased from 760 to 450 nm and the fibers were densely amounted in a straight shape. In addition, the average fiber diameter (270 nm) of nanofibers electrospun from polar HFIP solvent was much smaller than that (760 nm) of nanofibers electrospun from nonpolar chloroform solvent. Therefore, it could be concluded that conductivity or dielectric constant of the PLGA solution was a major parameter affecting the morphology and diameter of the electrospun PLGA fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1214–1221, 2006     

电泳涂料

本文介绍了电泳涂料及发展趋势。     

无润滑空气压缩机冷却水系统的清洗

介绍了无润滑空气压缩机冷却水系统结垢的危害性，阐述了清洗的原理，提出了清洗时应注意的工艺参数，操作时的注意事项和由此带来的经济效益。     

Synthesis,characterization, and thermotropic properties of side-chain liquid crystalline polysiloxane polymers with an oligo(ethylene oxide) unit in the side chain

A series of new alkene and octenyloxy monomers containing 4′-[oligo(ethylene oxide)] n monomethyl ether 4-biphenyl ether carboxyl benzoate [MS3BDBE_n] (n = to 3) and 1- (p-methoxydiphenyl)–(carboxyl benzoate) [oligo(ethylene oxide)]n [MS_m+2BEnDB] (m = 1, 6; n = 1 to 3) as end groups were synthesized. The molecular structure of the monomers was charaterized using nuclear magnetic resonance (NMR) spectroscopy. These monomers were grafted onto poly(methylhydrosiloxane)s (PMHS) by the platinun-catalyzed hydrosilylation process. The thermal transition temeratures and mesophase textures of the monomers and the polysiloxane polymers have been determined by diffential scanning calorimetry (DSC) and by polarized optical microscopy. The effect of changes in chemical structure on the mesophase properties, glass transition temperature, isotropic temperature, and mesophase texture of the monomers and the polysiloxane polymers is discussed. Polymers PS3BDBEn showed smectic and nematic phases which were not analogous to their precursor nematic monomers MS3BDBEn. Both monomers MS_m+2BE_nDB and their polymeric homologous PS_m+2BE_nDB did not exhibit mesophase properties. This demonstrated that the polymer effect could not stabilize the mesophase obtained from mesogenic core which contained a flexible oligo(ethylene oxide) unit interconnecting aromatic group. © 1995 John Wiley & Sons, Inc.     

Effects of Purified Persimmon Tannin and Tannic Acid on Survival and Reproduction of Bean Bug, Riptortus clavatus

We evaluated the effects of tannic acid and purified perrsimmon tannin on survival and reproduction of bean bugs, Riptortus clavatus.Feeding behavior of R. clavatus was also examined on sweet (cv. Fuyu) and astringent (cv. Chongdosi) persimmon fruits. Soluble tannin in sweet persimmon fruits decreased from 3% in early June to 0.5% in late September, but it increased from 2 to 8% during the same period in astringent persimmon fruits. More bugs visited sweet than astringent persimmon. Numbers of piercing/sucking spots were higher on sweet than on astringent persimmon. When fed 1 and 3% solutions of persimmon tannin, adult bugs ingested only 64.1 and 9.5% of the amount of water ingested by those offered the control (distilled water). Amounts of persimmon tannin ingested by the adult bugs were 6.5 and 2.8 times higher at 1 and 3% tannin solutions compared to a 0.1% solution. Persimmon tannin exerted negative effects on survival and reproduction of R. clavatus at higher concentrations (1 and 3% solutions). Feeding of R. clavatus adults decreased with increasing tannin concentrations. When results from both sexes were pooled, 50% mortality was achieved at 11 and 4 days after treatment with the 1 and 3% tannin solutions, respectively. Reproduction decreased with 1% tannin, and no eggs were produced with 3% tannin solution. Tannic acid was similar in its effects on R. clavatus. All nymphs died 14, 12, and 7 days after feeding on 0.1, 1, and 3% tannic acid, respectively. Adults were less sensitive than nymphs, and their survival was not affected by 0.1% tannic acid. However. 1 and 3% tannic acid solutions were fatal. Survivorship decreased to 50% at 11 and 6 days after supplying tannin solutions of 1 and 3% concentrations. Higher concentrations (1 and 3%) resulted in reduced reproduction, as was seen with persimmon tannin. Our data may explain why R. clavatus does not invade sweet persimmon orchards until late July, when concentrations of soluble tannin are low enough to allow them to feed.     

炭粒床高效工业除尘装置的设计与开发

The new dust removal technical route using the carbon-granular bed filter,packed of carbon particles with appropriate grade derive from an online-process vibration sieve,to replace the traditional baggy filter had been developed successfully for capturing the micro-carbon dusts produced from pulverization of petroleum coke,and the green close loop of carbon materials is thus completed in the combined pulverizing and classifying system and pulverized carbon dust removal process.The high dust removal efficiency greater than 99%,low outlet dust concentration less than 100 mg.m-3,low pressure drop through dust filtration chamber less than 980 Pa,simple and easy design,and flexible and stable operation were achieved also with the carbon-granular bed filter in both bench and industrial scale operations.     

利用镁渣作混合材生产复合硅酸盐水泥试验研究

我国现在不仅有传统混合材生产的复合水泥，也有新开辟混合材的复合水泥。传统的混合材为高炉水渣、火山灰、粉煤灰、石灰石、炉渣等；新开辟的混合材有磷渣、增钙液态渣、玄武岩、页岩、铬铁渣等，镁渣是金属镁厂提炼金属镁之后排放出的工业废渣，我国在镁渣复合水泥方面的研究与开发资料报导很少。制备优良性能的复合水泥，关键在于所使用的不同种类的混合材能够优势互补，本实验拟采用镁渣与矿渣进行复合生产镁渣复合硅酸盐水泥。     

铝合金交流电氧化工艺的研究

较详细地介绍了采用降压后的交流电市电对含铜或含硅的铝合金的阳极氧化方法和影响因素。实验表明,交流电氧化可以获得膜层厚、硬度高、耐蚀性好的氧化膜。该法也适用于一般纯铝的阳极氧化。     

XK908耐高温蒸煮胶粘剂的研制与应用

叙述了ＸＫ９０８耐高温蒸煮胶粘剂的制备方法，主要反应条件对缩聚反应和扩链反应的影响，并对产品的应用效果与国外同类产品进行了比较     

Elastic Response and Effect of Transverse Cracking in Woven Fabric Brittle Matrix Composites

This paper examines the linear elastic tensile and fracture behavior of biaxial plain weave SiC/SiC ceramic woven fabric composites. Iso-phase mode and random-phase mode have been adopted to simulate multilayer stacking and to predict the initial linear elastic constants. It has been found that both modes predict very close results. Porosities in the composite affect the stiffness significantly, while fiber undulation shows only minimal effect. The nonlinear stress-strain relation of the composite is due to transverse cracks, which initiate mainly from interyarn pores. In the second part of this paper, two methods, classical fracture mechanics and energy balance approach, have been used to examine the crack initiation and growth. A finite element method and a modified shear-lag method have been developed to evaluate the stress distribution in the yarn with transverse cracks. The composite stiffness reduction due to transverse cracking has been obtained by both the finite element and shear-lag methods. Strain energy release rates of the growth of transverse cracks have been studied by the crack-closure procedure, using finite element methods. Effects of the yarn size and crack position on the strain energy release rate have been quantified. It is concluded that thinner yarns lead to higher critical strains for transverse cracking.