High Areal Capacitance of N‐Doped Graphene Synthesized by Arc Discharge

The lack of cost effective, industrial‐scale production methods hinders the widespread applications of graphene materials. In spite of its applicability in the mass production of graphene flakes, arc discharge has not received considerable attention because of its inability to control the synthesis and heteroatom doping. In this study, a facile approach is proposed for improving doping efficiency in N‐doped graphene synthesis through arc discharge by utilizing anodic carbon fillers. Compared to the N‐doped graphene (1–1.5% N) synthesized via the arc process according to previous literature, the resulting graphene flakes show a remarkably increased doping level (≈3.5% N) with noticeable graphitic N enrichment, which is rarely achieved by the conventional process, while simultaneously retaining high turbostratic crystallinity. The electrolyte ion storage of synthesized materials is examined in which synthesized N‐doped graphene material exhibits a remarkable area normalized capacitance of 63 µF cm^?2. The surprisingly high areal capacitance, which is superior to that of most carbon materials, is attributed to the synergistic effect of extrinsic pseudocapacitance, high crystallinity, and abundance of exposed graphene edges. These results highlight the great potentials of N‐doped graphene flakes produced by arc discharge in graphene‐based supercapacitors, along with well‐studied active exfoliated graphene and reduced graphene oxide.     

Iris Recognition Using Wavelet Features

The traditional iris recognition systems require equal high quality human iris images. A cheap image acquisition system has difficulty in capturing equal high quality iris images. This paper describes a new feature representation method for iris recognition robust to noises. The disc-shaped iris image is first convolved with a low pass filter along the radial direction. Then, the radially smoothed iris image is decomposed in the angular direction using a one-dimensional continuous wavelet transform. Each decomposed one-dimensional waveform is approximated by an optimal piecewise linear curve connecting a small set of node points. The set of node points is used as a feature vector. The optimal approximation procedure reduces the feature vector size while maintaining recognition accuracy. The similarity between two iris images is measured by the normalized cross-correlation coefficients between optimal curves. The similarity between two iris images is estimated using mid-frequency bands. The rotation of one-dimensional signals due to the head tilt is estimated using the lowest frequency component. Experimentally we show the proposed method produces superb performance in iris recognition.     

Numerical analysis of the warpage problem in TSOP

The reliability and the solderability of thin small outline package (TSOP) are significantly affected by the warpage that is generated after epoxy molding compound (EMC) molding process. This warpage problem mainly results from the mismatch of material properties such as Young's modulus, Poisson's ratio and coefficient of thermal expansion (CTE) and the geometric structure of each component for TSOP. The optimization of both material properties and geometric structures using the numerical analysis is necessary to reduce the warpage of TSOP. However, there are still some limitations for the numerical analysis to obtain proper results consistent with the practical warpage values. In this paper, the numerical analysis is performed under the assumption of elastic behavior for EMC. Furthermore, to solve the limitations, the material properties at the molding temperature and the degree of reaction rate at the end of the molding process of EMC are considered together for the analysis. This numerical analysis gives the higher warpage values than the measured ones, and is applicable to the practical design of the reliable electronic package.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

A 1 Gbit synchronous dynamic random access memory with anindependent subarray-controlled scheme and a hierarchical decodingscheme

A prototype 1 Gbit synchronous DRAM with independent subarray-controlled isolation and hierarchical decoding schemes is demonstrated to alleviate the difficulties encountered in high-density devices with regard to failure analysis and performance optimization. The scheme to isolate memory arrays from “hard” defects and to overcome the dc leakages of “soft” defects with external sources allows monitoring of the leakage current for the defect analysis and testing of the device without being limited by the capabilities of on-chip voltage sources. A hierarchical decoding scheme with a dynamic CMOS series logic predecoder achieves improvements in circuit speed, power, and complexity. As a result, evaluation of the prototype devices can be facilitated, and the optimized circuit schemes achieve enhanced circuit performance. A fully working 1 Gbit synchronous DRAM with a chip size of 570 mm² was fabricated using a 0.16 μm CMOS process and tested for excellent functionality up to 143 MHz     

Space diversity antenna arrangements mounted on a metal pole forilluminating a street cell

Two-branch vertical space diversity (V-SD) and horizontal space diversity (H-SD) antenna arrangements mounted on a metal pole to illuminate a street cell are investigated. Measurement results taken in a Japanese suburban area are also presented. These results clarify the required arrangements for both V-SD and H-SD configurations. Measured results show that the optimum arrangement of the H-SD configuration depends on the diameter of the pole on which the antennas are mounted     

Improvements of spreading codes utilisation efficiency forintegrated multimedia services in CDMA network

A wireless MAC protocol for the CDMA network is proposed which provides the various bit rates required to support the integrated multimedia services. The proposed method improves the spreading codes utilisation efficiency by sharing limited spreading codes among all mobile terminals     

Plasma chemistries for dry etching of NiFe and NiFeCo

Plasma chemistries based on chlorine, bromine, or iodine have been investigated for inductively coupled plasma etching of NiFe and NiFeCo. There is clear evidence of a chemically enhanced etch mechanism with both Cl₂- and I₂- based mixtures, with no enhancement present for Br₂ chemistries. Etch yields are typically low (≤0.25), emphasizing the need for high ion fluxes in order to achieve practical material removal rates.     

A transport theory of pulse propagation in a strongly forwardscattering random medium

The scalar time-dependent equation of radiative transfer is used to develop a theory of pulse propagation in a discrete random medium whose scatter function (phase function) consists of a strong, narrow forward lobe superimposed over an isotropic background. The situation analyzed is that of a periodic sequence of plane-wave pulses, incident from an air half-space, that impinges normally upon the planar boundary surface of a random medium half-space; the medium consists of a random distribution of particles that scatter (and absorb) radiation in accordance with the aforementioned phase function. After splitting the specific intensity into the reduced incident and diffuse intensities, the solution of the transport equation in the random medium half-space is obtained by expanding the angular dependence of both the scatter function and the diffuse intensity in terms of Legendre polynomials, and by using a point matching procedure to satisfy the boundary condition that the forward travelling diffuse intensity be zero at the interface. Curves of received power show that, at small penetration depths, the coherent (reduced incident) intensity dominates, whereas at large depths, the incoherent (diffuse) intensity is the strongest and causes the pulses to broaden and distort. The motivation for this study was to complement a test series, on mm-wave pulse propagation in vegetation, by a theory that provides understanding of overall trends and assistance in the interpretation of measured results. In the mm-wave region, all scatter objects in a forest have large dimensions compared to a wavelength and, therefore, produce strong forward scattering and a phase function of the type assumed in this paper