A positive‐working photosensitive polyimide based on thermal cross‐linking and acidolytic cleavage

A novel positive‐working photosensitive polyimide (PSPI) based on a poly(hydroxyimide) (PHI), a crosslinking agent having vinyl ether groups, and a photoacid generator (PAG) was prepared. The PHI as a base resin of the three‐component PSPI was synthesized from 4,4′‐oxydiphthalic anhydride and 2,2′‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane through ring‐opening polymerization and subsequent thermal cyclization. 2,2′‐bis(4‐(2‐(vinyloxy)ethoxy)phenyl)propane (BPA‐DEVE) was used as a vinylether compound and diphenyliodonium 5‐hydroxynaphthalene‐1‐sulfonate was used as a PAG. The phenolic hydroxyl groups of the PHI and the vinyl ether groups of BPA‐DEVE are thermally crosslinked with acetal structures during prebake step, and the crosslinked PHI becomes completely insoluble in an aqueous basic solution. Upon exposure to UV light (365 nm) and subsequent postexposure bake (PEB), a strong acid generated from the PAG cleaves the crosslinked structures, and the exposed area is effectively solubilized in the alkaline developer. The dissolution behavior of the PSPI containing each 11.5 wt % of BPA‐DEVE and of the PAG was studied after UV exposure (365 nm) and PEB. It was found that the difference in dissolution rates between exposed and unexposed areas was enough to get high resolution. A fine positive pattern with a resolution of 5 μm in a 3.7‐μm‐thick film was obtained from the three‐component PSPI. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles

Carbon-based nanoparticles synthesized by heat treatment of nanodiamond in the temperature range of 1000–1900 °C were added to PTFE film to investigate the structural effect of the carbon particles on the tribological properties of PTFE composite film. Carbon-based nanoparticles were prepared by milling with micron sized beads in chemically treated water before their addition to PTFE film. The wear and frictional properties of PTFE nanocomposite film were measured by the ball on plate type wear test. The wear resistance of PTFE film was found to be enhanced by the addition of 2 wt% of carbon nanoparticles. The wear coefficient of PTFE film was decreased from 16.2 to 3.5 × 10⁻⁶ mm³/N m by the addition of carbon-based nanoparticles heat-treated at 1000 °C. Increasing the heating temperature of the nanodiamonds caused the extent of aggregation and particle size to increase. The wear resistance of PTFE nanocomposite film was enhanced by the addition of nanodiamonds heat-treated at 1000 °C, but decreased when the heat treatment temperature of carbon nanoparticles was further increased. Tribological behavior of PTFE nanocomposite films depending on the types of carbon nanoparticles were explained based on the structural, physical and chemical modification of carbon nanoparticles.     

Effects of chemical and plasma surface treatments on the O2-annealed Ni/Au contact to p-Gan

The effects of boiling Aqua Regia (AQ), N₂/Cl₂ plasma followed by AQ and O₂ plasma followed by AQ surface treatments prior to Ni/Au (20 nm/20 nm) metallization to p-GaN:Mg (∼ 3 × 10¹⁷ cm^− 3) have been investigated. N₂/Cl₂ plasma was employed in a bid to lower the Ga/N and O/Ga ratios of the GaN surface to improve the contact properties to p-GaN, while O₂ plasma was employed as an alternative to incorporate O into the Ni/Au system. Results show that a low Ga/N ratio does not necessarily correspond to a better contact. The positive effect of O₂ over N₂ anneal is observed only for the AQ-treated sample, although the mechanisms responsible for its positive effect: NiO formation and Ni/Au layer-reversal were observed for all O₂-annealed contacts. We conclude that the effect of O₂ anneal on the Ni/Au contact is dependant on the p-GaN surface prior to metallization.     

Drug release from heat-treated polyvinyl alcohol films

Polyvinyl alcohol (PVA) films containing 10% w/w of a model drug, sulphathiazole, were cast from aqueous solutions and subjected to heat treatment at specific temperatures for known periods of time. Heat treatment at temperatures above the T_g of the PVA films slowed down the rate of drug release from the films. Increasing the temperature of heat treatment from 120°C to 160°C further decreased the rate of drug release. On the other hand, if the heat treatment were conducted at a temperature below the T_g e.g. at 80°C, there were insignificant differences between the release profile of sulphathiazole from heat-treated films and that from untreated films. The duration of heat treatment affected the rate of drug release to a smaller extent compared to the temperature of heat treatment. These results correlated with the heat induced changes in the morphology of, and in the extent of water uptake by the PVA films.     

Correlates of osteopenia in patients with cystic fibrosis

The responses to heat shock in Tritrichomonas mobilensis, a squirrel monkey parasite and Tritrichomonas augusta, an amphibian trichomonad, were evaluated by means of metabolic labeling with [35S]methionine. Electrophoretically separated trichomonad proteins synthesized at different temperatures were visualized by autoradiography and the label incorporation quantitated by a trichloroacetic acid precipitation procedure. A considerable difference in thermotolerance between the two species was found as the protein synthesis reached a maximum at 41 C in T. mobilensis and 37 C in T. augusta. The latter tolerated temperature increases 13 C above normal cultivation temperatures as compared to only 4 C thermotolerance range above normal in T. mobilensis. Major heat shock proteins (Hsps) were expressed in both T. mobilensis (with apparent Mr 94, 72, and 58 kDa) and T. augusta (Mr 94, 70, and 56 kDa) as revealed by autoradiography. Western blot analysis with polyclonal antibody against DnaK of Escherichia coli showed the presence of antigenic Hsp70 homologs in both trichomonads. Similarly, a polyclonal antibody against Hsp60 with broad interspecies cross-reactivity detected Hsp60 homologs in both T. mobilensis and T. augusta. The anti-DnaK antibody cross-reacted with a T. mobilensis protein localized in Golgi apparatus as demonstrated by immunoelectron microscopy. Immunocytochemistry on trichomonad frozen sections revealed the presence of the Hsp60 homolog in light-microscopic granules corresponding to hydrogenosomes.     

Rapid Prototyping and Tooling of Custom-Made Tracheobronchial Stents

Rapid prototyping (RP) and rapid tooling (RT) techniques can be applied to the field of medicine primarily because of their ability to produce customised profiles and geometries in relatively short lead times. In this paper, the process by which these techniques can be applied for the production of customised tracheobronchial stents for the purpose of maintaining patency in an occluded respiratory tract is described. A comparison of RP systems was carried out to establish the preferred RP method to produce the master model. The vacuum casting RT process was then used to produce the stent.     

Sulfur-containing compounds from Scorodocarpus borneensis and their antimicrobial activity

This paper reports two cases of neotropical echinococcosis caused by Echinococcus oligarthrus and E. vogeli, neither of which has been reported from Suriname. Case 1, a six-year-old boy, presented a 15 x 25 mm retro-ocular cystic tumor (observed by ultrasound, computed tomography scan, and magnetic resonance imaging) causing exophthalmia, chemosis, palpebral ptosis, and blindness of the left eye. Of two tentative diagnoses, Echinococcus cyst or dermoid tumor, the former was shown to be correct at surgery when a clear liquid and detached protoscoleces were aspirated. Rostellar hooks of the protoscolex were characteristic of E. oligarthrus. Case 2, a 41-year-old man, had polycystic masses excised from the liver and abdomen. A presurgery diagnosis of E. vogeli infection was made due to calcifications seen in the lesions, positive serology, residence of the patient in the tropical forest, and later by the size and shape of rostellar hooks. The presence of these two parasites in one of the former Guianas is not surprising; both species are endemic in tropical forest in Central and South America wherever people have not exterminated wild canids, especially the bush dog, (Speothos venaticus), and felids (wild cats of several species), along with pacas, agoutis, and other rodents that serve as intermediate host of these two cestodes. Eighty-six cases of polycystic echinococcosis are known in people from 11 countries from Nicaragua to Argentina: 32 due to E. vogeli, three to E. oligarthrus, and 51 for which determination of the species was not possible because the hooks of the protoscolex were not found or described. Research to elucidate aspects of transmission of E. vogeli and E. oligarthrus is of practical importance for defining measures for preventing the severe and frequently fatal illnesses caused by these two cestodes.