Novel antibacterial modalities against methicillin resistant Staphylococcus aureus derived from plants

Abstract

Methicillin-resistant Staphylococcus aureus (MRSA) is a notorious bacterial pathogen that induces high mortality and morbidity. Due to the emergence of multiple resistance, antibiotic treatments are rapidly becoming ineffective for the related infections. Natural products, especially those derived from plants, have been proven to be effective agents with unique antibacterial properties through different mechanisms. This review interprets the resistance mechanisms of MRSA with the aim to conquer public health threat. Further, recent researches about plant antimicrobials that showed remarkable antibacterial activity against MRSA are recorded, including the crude plant extracts and purified plant-derived bioactive compounds. Novel anti-MRSA modalities of plant antimicrobials such as alteration in efflux pump, inhibition of pyruvate kinase, and disturbance of quorum sensing in MRSA are also summarized which may be promising alternatives to antibacterial drug development in future.     

Use of mild-heat treatment following high-pressure processing to prevent recovery of pressure-injured Listeria monocytogenes in milk

This study examined the inactivation of Listeria monocytogenes in milk by high-pressure processing (HPP) and bacterial recovery during storage after HPP. We developed a technique to inhibit the bacterial recovery during storage after HPP (550 MPa for 5 min) using a mild-heat treatment (30-50 degrees C). Various mild-heat treatments were conducted following HPP to investigate the condition on which the bacterial recovery was prevented. Immediately after HPP of 550 MPa at 25 degrees C for 5 min, no L. monocytogenes cells were detected in milk regardless of the inoculum levels (3, 5, and 7 log(10)CFU/ml). However, the number of L. monocytogenes cells increased by >8 log(10)CFU/ml regardless of the inoculum levels after 28 days of storage at 4 degrees C. Significant recovery was observed during storage at 25 degrees C; the bacterial number increased by >8 log(10)CFU/ml after 3 days of storage in the case of an initial inoculum level of 7 and 5 log(10)CFU/ml. Even in the case of an initial inoculum level of 3 log(10)CFU/ml, the bacterial number reached the level of 8 log(10)CFU/ml after 7 days of storage. No bacterial recovery was observed with storage at 37 degrees C for 28 days. Milk samples were treated by various mild-heat treatments (30-50 degrees C for 5-240 min) following HPP of 550 MPa at 25 degrees C for 5 min, and then stored at 25 degrees C for 70 days. The mild-heat treatment (e.g., 37 degrees C for 240 min or 50 degrees C for 10 min) inhibited the recovery of L. monocytogenes in milk after HPP. No recovery of L. monocytogenes in milk was observed during 70-day storage at 25 degrees C in samples that received mild-heat treatments such as mentioned above following HPP (550 MPa for 5 min). Moreover, the mild-heat treatment conditions (temperature and holding time) required to inhibit the recovery of L. monocytogenes in milk was modelled using a logistic regression procedure. The predicted interface of recovery/no recovery can be used to calculate the mild-heat treatment condition to control bacterial recovery during storage at 25 degrees C after HPP (550 MPa for 5 min). The results in this study would contribute to enhance the safety of high-pressure-processed milk.     

Storage capacity of hydrogen in tetrahydrofuran hydrate

The storage capacity of hydrogen in tetrahydrofuran hydrate was investigated by means of pressure-volume-temperature (p-V-T) measurement and Raman spectroscopic analysis. We carried out two measurement strategies using Raman spectroscopic analysis. One was isothermal pressure-swing absorption using tetrahydrofuran hydrate at 277.15 K, and the other was the preparation of a single crystal of hydrogen+tetrahydrofuran mixed gas hydrate from compressed hydrogen and tetrahydrofuran aqueous solutions along the stability boundary. The storage amount of hydrogen at 277.15 K obtained from the p-V-T measurement is about 1.6 mol (hydrogen)/mol (tetrahydrofuran) (about 0.8 mass%) at 70 MPa, and isothermal Raman spectroscopic measurement reveals that it reaches the maximum value of 2.0 mol (hydrogen)/mol (tetrahydrofuran) at about 85 MPa. These results agree well with those for a single crystal of hydrogen+tetrahydrofuran hydrate.     

Effects of a constricted nozzle on the arc phenomena in the TIG welding process

Effects of a constricted nozzle on the arc phenomena in the tungsten inert gas (TIG) welding process are investigated by numerical simulation. the obtained results show that the temperature and velocity of the arc plasma are increased by attaching an additional gas nozzle, which is called the "constricted nozzle". As a result, the iron vapour does not diffuse upward but is transported outward. In addition, the heat transfer to the base metal surface is enhanced.     

Investigation on the mechanism of steel/steel solid-state bonding at low temperatures

The solid-state bonding of ultralow-carbon steels was conducted by hot pressing and subsequent isothermal holding at low temperatures ranging from 873 to 923?K. The evolution of the interfacial strength was found to consist of two stages; the first stage, where the increase in interfacial strength is rapid and significant, and the second stage, where the increase is gradual. The evolution of strength in the first stage primarily takes place in contact regions produced by hot pressing. In the second stage, on the contrary, the evolution seems to result from the increase in the contact regions due to the shrinkage of voids. A molecular dynamics simulation was performed to clarify the atomic behaviour at the interface during the first stage. The results revealed that the disordered atomic arrangement caused by compression was rearranged with increasing isothermal holding time, leading to improved coherency between the contact regions and increased interfacial strength.     

Development of a High-Affinity Antibody-Binding Peptide for Site-Specific Modification

Immunoglobulin G (IgG)-binding peptides such as 15-IgBP are convenient tools for the site-specific modification of antibodies and the preparation of homogeneous antibody–drug conjugates. A peptide such as 15-IgBP can be selectively crosslinked to the fragment crystallizable region of human IgG in an affinity-dependent manner via the ϵ-amino group of Lys8. Previously, we found that the peptide 15-Lys8Leu has a high affinity (K_d=8.19 nM) due to the presence of the γ-dimethyl group in Leu8. The primary amino group required for the crosslinking to the antibodies has, however, been lost. Here, we report the design and synthesis of a novel unnatural amino acid, 4-(2-aminoethylcarbamoyl)leucine (Aecl), which possesses both the γ-dimethyl fragment and a primary amino group. A peptide containing Aecl8 (15-Lys8Aecl) was synthesized and showed a binding affinity ten times higher (K_d=24.3 nM) than that of 15-IgBP (K_d=267 nM). Fluorescein isothiocyanate (FITC)-labeled 15-Lys8Aecl with an N-hydroxy succinimide ester at the side chain of Aecl8 (FITC-15-Lys8Aecl(OSu)) successfully labeled an antibody (trastuzumab, Herceptin^®) with the fluorophore. This peptide scaffold has both strong binding affinity and crosslinking capability, and could be a useful tool for the selective chemical modification of antibodies with molecules of interest such as drugs.     

Power supply systems for rapid cycling synchrotron

JAEA and KEK are jointly constructing the high‐intensity proton accelerator project J‐PARC. Its main accelerator is a 3‐GeV rapid cycling synchrotron (RCS). Two types of resonant excitation systems, parallel and cascade, are introduced to excite DC biased 25‐Hz AC currents through its main magnets. The parallel excitation is adopted for the dipole magnet power supply system, and the cascade excitations are adopted for the seven family quadrupole magnets system. In this paper, the two systems are investigated and analyzed, and an explanation is given as to why the different types are adopted in each system. The authors believe that such hybrid exciting systems are most suitable for a high‐power RCS. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(1): 49–60, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20535     

Study on causes of the fires in rubble piles produced after the Great East Japan Earthquake, 2011

This paper seeks to determine the trigger of faint heat generation, which was one of the causes of fires in the piles of rubble produced after the 2011 Great East Japan Earthquake. The rubble piles consist of various combustible materials, such as wood, paper and plastics, as well as non‐combustible materials from destroyed buildings. Multiple rubble outdoor storage areas were temporarily set up in the disaster areas to dispose of rubble after it was piled up and separated. However, fires have been occurring in these storage areas since the summer of 2011. One cause of such fires is thought to be the heat generated by fermentation of microorganisms that easily proliferates within the piled up rubble, ultimately resulting in spontaneous ignition. In this study, we collected samples from rubble outdoor storage areas where fires have occurred. We then conducted thermal analyses to obtain basic data, and finally, we developed safety measures to prevent the recurrence of fire. The results revealed that the heat generated during fermentation of rotten tatami and wood chips most likely acts as a trigger causing the fires, given the adiabatic conditions are good. Copyright © 2014 John Wiley & Sons, Ltd.