Metal gate-HfO/sub 2/ MOS structures on GaAs substrate with and without Si interlayer

In this letter, we studied the effects of post-deposition anneal (PDA) time and Si interface control layer (ICL) on the electrical characteristics of the MOS capacitor with high-/spl kappa/ (HfO/sub 2/) material on GaAs. Thin equivalent oxide thickness (EOT<3 nm) with excellent capacitance-voltage (C-V) characteristics has been obtained. The thickness of the Si ICL and PDA time were correlated with C-V characteristics. It was found that high temperature Si ICL deposition and longer PDA time at 600/spl deg/C improved the C-V shape, leakage current, and especially frequency dispersion (<5%).     

Synthesis and device application of hybrid host materials of carbazole and benzofuran for high efficiency solution processed blue phosphorescent organic light-emitting diodes

Highly efficient solution processed blue phosphorescent organic light-emitting diodes were developed using a carbazole–dibenzofuran hybrid host material. Asymmetric carbazole–dibenzofuran hybrid host material was synthesized by coupling reaction of phenylcarbazole and dibenzofuran, and it showed good film morphology and bipolar charge transport properties after solution coating. Blue phosphorescent organic light-emitting diodes fabricated by spin coating exhibited extremely high quantum efficiency of 23.9%, which was better than any other data reported for solution processed blue phosphorescent organic light-emitting diodes.     

Strain‐Visualization with Ultrasensitive Nanoscale Crack‐Based Sensor Assembled with Hierarchical Thermochromic Membrane

As eidetic signal recognition has become important, displaying mechanical signals visually has imposed huge demands for simple readability and without complex signal processing. Such visualization of mechanical signals is used in delicate urgent medical or safety‐related industries. Accordingly, chromic materials are considered to facilitate visualization with multiple colors and simple process. However, the response and recovery time is very long, such that rapid regular signals are unable to be detected, i.e., physiological signals, such as respiration. Here, the simple visualization of low strain ≈2%, with ultrasensitive crack‐based strain sensors with a hierarchical thermochromic layer is suggested. The sensor shows a gradient color change from red to white color in each strain, which is attributed to the hierarchical property, and the thermal response (recovery) time is dramatically minimized within 0.6 s from 45 to 37 °C, as the hierarchical membrane is inspired by termite mounds for efficient thermal management. The fast recovery property can be taken advantage of in medical fields, such as monitoring regular respiration, and the color changes can be delicately monitored with high accuracy by software on a mobile phone.     

Optical BGP Routing Convergence in Lightpath Failure of Optical Internet

Optical Border Gateway Protocol (OBGP) is an extension to BGP for Optical Cross Connects (OXCs) to automatically setup multiple direct optical lightpaths between many different autonomous domains. With OBGP, the routing component of a network may be distributed to the edge of the network while the packet classification and forwarding is done in the core. However, it is necessary to analyze the stable convergence functions of OBGP in case of lightpath failures. In this paper, we first describe the architecture of the OBGP model and analyze the potential problems of OBGP, e.g., virtual BGP router convergence behavior in the presence of lightpath failure. We then propose an OBGP convergence model derived from an inter‐AS (Autonomous System) relationship. The evaluation results show that the proposed model can be used for a stable OBGP routing policy and OBGP routing convergence under lightpath failures of the optical Internet.     

一种新型的低损耗激光单模光纤耦合器

本文报导了一种新型低损耗单模光纤的光学耦合器，叙述了应用光线矩阵法和梯度光学理论的设计方法，同时，从理论上讨论了耦合特性。     

Fabrication of Ordered Nanostructured Arrays Using Poly(dimethylsiloxane) Replica Molds Based on Three‐Dimensional Colloidal Crystals

Hexagonally arrayed structures of colloidal crystals with uniform surface are a good candidate for master molds to be used in soft lithography. Here, the fabrication of periodically arrayed nanostructures using poly(dimethylsiloxane) (PDMS) molds based on three‐dimensionally (3D) ordered colloidal crystals is reported. A robust, high‐quality 3D colloidal‐crystal master molds is prepared using the colloidal suspension containing a water‐soluble polymer. The surface patterns of the 3D colloidal crystals can then be transferred onto a polymer film via soft lithography, by means of the replication of the surface pattern with PDMS. Various hexagonally arrayed nanostructure patterns can be fabricated, including close‐packed and non‐close‐packed 2D arrays and honeycomb structures by the structural modification of the 3D colloidal‐crystal templates. The replicated hexagonally arrayed structures can also be used as templates for producing colloidal crystals with 2D superlattices.     

Effects of Interfacial Dielectric Layers on the Electrical Performance of Top‐Gate In‐Ga‐Zn‐Oxide Thin‐Film Transistors

We investigate the effects of interfacial dielectric layers (IDLs) on the electrical properties of top‐gate In‐Ga‐Zn‐oxide (IGZO) thin film transistors (TFTs) fabricated at low temperatures below 200°C, using a target composition of In:Ga:Zn = 2:1:2 (atomic ratio). Using four types of TFT structures combined with such dielectric materials as Si₃N₄ and Al₂O₃, the electrical properties are analyzed. After post‐annealing at 200°C for 1 hour in an O₂ ambient, the sub‐threshold swing is improved in all TFT types, which indicates a reduction of the interfacial trap sites. During negative‐bias stress tests on TFTs with a Si3N4 IDL, the degradation sources are closely related to unstable bond states, such as Si‐based broken bonds and hydrogen‐based bonds. From constant‐current stress tests of Id = 3 µA, an IGZO‐TFT with heat‐treated Si₃N₄ IDL shows a good stability performance, which is attributed to the compensation effect of the original charge‐injection and electron‐trapping behavior.     

Force control for hydraulic load simulator using self-tuning grey predictor – fuzzy PID

Hydraulic systems play an important role in modern industry for the reason that hydraulic actuator systems have many advantages over other technologies with electric motors, as they possess high durability and the ability to produce large forces at high speeds. Therefore, the hydraulic actuator has a wide range of application fields such as hydraulic punching, riveting, pressing machines, and molding technology, where controlled forces or pressures with high accuracy and fast response are the most significant demands. Consequently, many hybrid actuator models have been developed for studying how to control forces or pressures with best results.This paper presents a kind of hydraulic load simulator for conducting performance and stability testing related to the force control problem of hydraulic hybrid systems. In the dynamic loading process, perturbation decreases control performance such as stability, frequency response, and loading sensitivity decreasing or bad. In order to improve the control quality of the loading system while eliminating or reducing the disturbance, a grey prediction model combined with a fuzzy PID controller is suggested. Furthermore, fuzzy controllers and a tuning algorithm are used to change the grey step size in order to improve the control quality. The grey prediction compensator can improve the system settle time and overshoot problems. Simulations and experiments on the hydraulic load simulator are carried out to evaluate the effectiveness of the proposed control method when applied to hydraulic systems with various external disturbances encountered in real working conditions.     

Improved device performances in polymer light-emitting diodes using a stamp transfer printing process

The device performances of spin-coated and stamp transfer printed devices were compared. There was little difference of morphology between the spin-coated and stamp transfer printed devices. However, the stamp transfer printing process was better than the spin-coating process in terms of current density, light-emitting efficiency and lifetime. In particular, the lifetime of the stamp transfer printed device was doubled compared with that of the spin-coated device.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.