Esters of hydroxystearic acids as primary low-temperature plasticizers for a vinyl chloride—Vinyl acetate copolymer

Summary Thirty-one acyloxy or aryloxy esters prepared from hydroxystearic acids have been evaluated as plasticizers for a vinyl chloride-vinyl acetate copolymer (95∶5). Many of them were found to be primary plasticizers, having outstanding low-temperature performance when employed at the 35% level. Formulations with these compounds compared quite favorably in tensile properties with those containing the di-2-ethylhexyl esters of phthalic, sebacic, azelaic, and adipic acids. Volatility losses were similar to those of the four di-2-ethylhexyl esters. The loss of plasticizer through migration was equal to or less than that from compositions containing the esters of sebacic, azelaic, and adipic acids but was greater than that of the phthalate ester. A mechanistic scheme of plasticizer-polymer interaction has been presented, proposing that the rate of diffusion of plasticizer through the polymer mass is a controlling factor in both good low-temperature performance and the resulting high migration losses. Methyl esters, some aromatic esters, and esters containing three or more polar centers have improved permanence but show a more rapid change in torsional modulus as the temperature is lowered during the determination of the Clash-Berg stiffening temperature. Eastern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Fraktionierung und Charakterisierung von ungehärteten Epoxidharzen aus Bisphenol A und Epichlorhydrin

Gel permeation chromatography and thin layer chromatography have been used respectively to separate and characterize the first seven members of an epoxy resin polymer homologous series on a preparative and analytical scale. The epoxy resin was formed by the reaction between Bisphenol-A and epichlorhydrin. NMR was used to identify the oligomers. The relationship between extinction coefficient and degree of polymerisation was also determined.     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

Hydrodynamic drag forces on two porous spheres moving along their centerline

This paper numerically evaluates the hydrodynamic drag force exerted on two highly porous spheres moving steadily along their centerline (sphere #1 and sphere #2) through a quiescent Newtonian fluid over a Reynolds number ranging from 0.1 to 40. At creeping flow limit, the drag forces exerted on both spheres were identical. At higher Reynolds numbers the drag force on sphere #1 was higher than sphere #2, revealing the shading effects produced by sphere #1 on sphere #2. At dimensionless diameter (β, =d_f/2k^0.5, d_f and k are floc diameter and interior permeability, respectively) >20, the spheres can be regarded nonporous. At β<20, the drag forces dropped. At β<2, the drag forces approached “no-spheres” limit. An increased size ratio of two spheres (d_f1/d_f2) would increase the drag force on sphere #1 and reduce that on sphere #2. At increasing β for both spheres, the drag force on sphere #2 was increased because of the more difficult advective flow through its interior, and at the same time the drag was reduced owing to the stronger wake flow produced by the denser sphere #1. The competition between these two effects leads to complicated dependence of drag force on sphere #2 on β value. These effects were minimal when β became low. Two identical spheres could move steadily along their centerline. At higher Reynolds number, the two spheres would move closer because of the incorporation of inertia force. For spheres of different diameters, the sphere # 2 would move faster than sphere #1 regardless of their size ratio and β value. This occurrence yielded efficient coagulation when two porous spheres were moving in-line.     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.     

Semi-annual cycle of sea-surface temperature in the East/Japan Sea and cooling process

Semi-annual cycles of the sea-surface temperature (SST) in the East/Japan Sea (EJS) and their forcings were examined by analysing National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer data, scatterometer wind vectors, and heat flux data. The semi-annual cycle contributed to the total variance of the SST by 8% and amounted to 25% of the amplitudes of the annual SST cycle, particularly in the Tatarskiy Strait and along the continental shelf off Russia. The lowest phase, corresponding to the minimum SST, occurred during early November and 6 months earlier in May or June depending on the position. The forcings of the semi-annual cycle were not semi-annual but substantially annual with a lag of 6 months, which gave rise to SST cooling in spring and autumn. Our analyses illustrated that SST cooling in autumn was caused by direct, local atmospheric wind forcings, whereas the cooling with large amplitudes of the semi-annual cycle in spring was caused by the non-local, remotely forced cold water advection of the Liman Current associated with sea-ice melting in the Tatarskiy Strait. The phase lag of 1–2 months between the complete melting of the sea ice in the Tatarskiy Strait and the surface cooling along the Russian continental shelf was related to the advection of cold water from sea ice in the form of the Liman Cold Current. The semi-annual cycle also resulted from asymmetry of the time series of the SST due to a long cold winter and a short warm summer. To understand how SST curves are distorted and asymmetric, we suggested two mathematical parameters of kurtosis and skewness. In addition, we suggest that the ratio of the semi-annual amplitude to the annual amplitude of SST harmonics can be used as a typical indicator of the asymmetry in year-to-year SST variations.     

Item recommendation based on context-aware model for personalized u-healthcare service

A personalized service in the ubiquitous environment is to provide services or items, which reflect personal tastes, attitudes, and contexts. It is impossible to reflect the context information generated in u-healthcare environments due to the existing recommendation system performing the recommendation using the information directly input by users and application usage record only. This study develops a context-aware model using the context information provided by the context information model. The study applies it to the extraction of the missing value in a collaborative filtering process. The context-aware model reflects the information that selects items by users according to the appropriate context using the C-HMM and provides it to users. The solution of the missing value in the preference significantly affects the recommendation accuracy in a preference based item supply method. Thus, this study developed a new collaborative filtering for ubiquitous environments by reflecting the missing preference value and reflecting it to the collaborative filtering using the context-aware model. Also, the validity of this method will be evaluated by applying it to menu services in u-healthcare services.     

Adsorption and desorption kinetics of hydrocarbons in FCC catalysts studied using a tapered element oscillating microbalance (TEOM). Part 2: numerical simulations

The factors affecting the adsorption and desorption kinetics in a TEOM are reviewed in detail with particular attention given to the assumptions required to obtain physical transport parameters from the data. Two models are presented to simulate TEOM adsorption data in the case that concentration differences down the catalyst bed can be neglected, as is appropriate when the amount of catalyst used is small, the carrier gas flowrate is large, and/or the adsorbate partial pressure is low. In the first model, the effective diffusion coefficient, D_e, is taken to be constant. In the second model, the effective diffusion coefficient is assumed to obey the Darken equation, D_e=D₀/(1−θ). The TEOM results obtained on n-hexane, n heptane, n-octane, toluene and p-xylene on a commercial FCC catalyst and on pure rare-earth exchanged zeolite Y under non-reacting conditions (373-) are analysed in detail. It is found that intracrystalline diffusion is not the limiting factor affecting the overall rates of adsorption and desorption for the systems studied. Instead, it is the transport of molecules between the adsorbed and vapour phases at the edge of zeolite crystallites that is the limiting transport step affecting the overall kinetics. For the FCC catalyst, the limiting step is the transport of molecules at the zeolite-matrix interface rather than, say, the matrix-vapour interface. Local rate constants for the desorption of the hydrocarbons at the rate-controlling interface have been obtained.