Lipid products formed during desaturation of [1-14C] stearyl CoA by hen liver microsomes

A number of lipid products are formed during the desaturation of stearyl CoA by hen liver microsomes. This article presents an analysis of the products formed when [1-¹⁴C] stearyl CoA is incubated with hen liver microsomes for various time periods. [1-¹⁴C] Oleyl CoA was the first radioactive unsaturated product formed. Synthesis of phospholipids containing [1-¹⁴C] oleic acid occurs only after the desaturase activity has begun to decline. The specific radioactivity of [1-¹⁴C] oleyl CoA was similar to the specific radioactivity of [1-¹⁴C] stearyl CoA at all time periods tested. The specific radioactivities of [1-¹⁴C] oleic acid and phospholipids containing [1-¹⁴C] oleic acid were much lower than that of the [1-¹⁴C] stearyl CoA.     

Spinning of poly(ethylene terephthalate) fibers from a melt pool without a spinneret

Monofilament fibers were spun continuously from the free surface of a pool of molten poly(ethylene terephthalate) without the aid of a spinneret. For take-up velocities in the range of 12 to 400 ft/min, the denier of the filaments produced was an inverse power function of take-up velocity, and the birefringence was an inverse power function of the filament diameter. Production rate and product uniformity were strongly dependent on take-up velocity and surface temperature of the melt pool.     

Effect of excess boron fertilization on status and availability of boron in calcareous soils

Field experiments were conducted at Al-Qatif area in the eastern region of Saudi Arabia to study the status and availability of B under B fertilization regime in three types of calcareous soils and to evaluate the response of two alfalfa varieties, Hassawi (local variety) and Hyden (american variety), to increasing levels of added B.Boron was applied at 7 rates as Na₂B₄O₇.10H₂O. Four cuttings were taken from each site at different intervals. Data showed that extractable B by hot-water and NH₄HCO₃-DTPA (8 days after borax application) was significantly (p <0.001) affected by soil type and B applications. The amount of B recovered by hot-water from the three soils, 200 days after borax application, was in the following order: sandy loam > sandy clay loam > clay loam.Total dry matter of alfalfa (4 cuttings) was significantly (p <0.05) affected by soil type, borax application rates and alfalfa variety.The critical level of B in plant as determined by Cate and Nelson analysis, ranged from 148 to 652 mg kg^–1 dry matter for Hassawi cultivar and 138 to 521 mg kg^–1 for Hyden cultivar in the first harvest. However, the upper critical levels for the 2nd, 3rd and 4th harvests were 800, 875 and 935 mg B kg^–1 dry matter for Hassawi and 603, 723 and 812 mg B kg^–1 for Hyden varieties, respectively. Nevertheless, the lower critical levels for 2nd, 3rd and 4th harvests ranged from 148 to 153 mg B kg^–1 dry matter for Hassawi and 138 to 142 mg B kg^–1 for Hyden.     

An improved method for numerical solution of distillation processes

A new method for the numerical solution of a stagewise process is presented. The method consists of total linearization of all the equations in the distillation process, using the method of quasi-linearization. The resulting equations form a block-band matrix which can be readily solved by a method developed by the author. The method used for obtaining convergence is presented. The method has been tested for both binary and multi-component systems. The method has been compared with the Amundson-Pontinen method for a five component mixture. The method gives more rapid convergence. Numerical experiments indicate that the vapor and liquid flow rates are more stringent requirements than the bubble point.     

Fluor SOx净化工艺--为俄罗斯绿色环境开发的将SO2转化为元素硫的经济技术

Fluor公司开发的Fluor SO_2净化工艺具有广泛多样的工艺布局,可以通过经济的方式定制脱除烟气中的有害组成。该工艺几乎能去除全部SO_2并减少CO排放。Fluor SO_x净化工艺的主要步骤已在多套工业装置中得到成功的证实。除技术可行、经济合理之外,Fluor SO_x净化工艺不会产生任何有害副产物,也不会遇到与SO_3 有关的腐蚀问题。此外,该工艺生产高纯度可市售的元素硫。论述了Fluor SO_x净化工艺的特征、技术和成本优势、设计和操作的简易性以及实施的便利性。     

Solid phase compaction of polymeric powders: effects of compaction conditions on pressure and density variations

In a recent communication it was shown that the pressure losses during the solid phase compaction of a polymeric powder could be predicted from a simple relationship of the form:

$\text{P}{}_2\text{P}{}_1\text{=(K)}{}^{\mathrm{<mtext>h</mtext><mtext>d</mtext>}}$

where $\text{h}\text{D}$ is a function of the geometry of the compact. This has now been explored in more detail and it has been found that for PVdC and PVC the factor K is dependent on the rate of compaction and the die surface finish but is independent of compaction pressure and die diameter. To illustrate the effect of the pressure losses on the structural uniformity of the compacts, microhardness measurements were taken at a large number of points across a section of each sample. A computer plot of hardness contours provided a picture of the homogeneity of the sample which could be related to the compaction conditions and average density of the compact.     

REVERSED RESIDUALS IN AUTOREGRESSIVE TIME SERIES ANALYSIS

Abstract. Both linear and non-linear time series can have directional features which can be used to enhance the modelling and investigation of linear or non-linear autoregressive statistical models. For this purpose, reversed p th-order residuals are introduced. Cross-correlations of residuals and squared reversed residuals allow extensions of current model identification ideas. Quadratic types of partial autocorrelation functions are introduced to assess dependence associated with non-linear models which nevertheless have linear autoregressive correlation structures. The use of these residuals and their cross-correlation functions is exemplified empirically on some deseasonalized river flow data for which a first-order autoregressive model is a satisfactory second-order fit. Parallel theoretical computations are undertaken for the non-linear first-order random coefficient autoregressive model and comparisons are made. While the data are shown to be strongly non-linear, their correlational signatures are found to be convincingly different from those of a first-order autoregressive model with random coefficients.     

Transferring information from one experiment to another

This paper presents a rational method (based on Bayes' Theorem) for transferring information on parameter values from one experiment to another, in situations where the mathematical models for the two experiments share some parameters in common. The uncertainty in the estimates of the parameters, which reflects the experimental error in the initial experiment, is properly transferred as well. The use of the method is demonstrated by applying it to a fairly complicated system, typical in chemical reaction engineering, in which the kinetic parameters in a model for the hydrogenolysis of butane reaction were estimated using data obtained from a bench-scale, integral packed-bed reactor. These parameter estimates were then transferred to a model for a fluidized bed reactor in which the same chemical reaction occurred. Using the fluidized bed data they were updated and two additional parameters in the fluidized bed model were also estimated. This procedure allows a more realistic estimate of the uncertainty in all parameter values in the model for the fluidized bed reactor.     

Synthesis and properties of cationic resins derived from aniline-modified epoxy resins and various amines

Aniline-modified epoxy resin which contains tertiary amine in the middle of the polymer chain was synthesized by the reaction of aniline and epoxy resin. The resulting aniline-modified epoxy resin and two commercial epoxy resins with different epoxy equivalent weights were reacted with 2-ethylhexanol-blocked toluene diisocyanate (2-EH-blocked TDI) to obtain thermally crosslinkable epoxy resins. These epoxy resins were subsequently reacted with various secondary amines and partially neutralized with acetic acid to give thermally crosslinkable cationic resins. The resulting cationic resins were dissolved in suitable solvents and mixed with deionized water to form emulsions. The crosslinking properties, emulsion, and electrodeposition properties of these resins were studied in some detail. The electro-deposition yields of the emulsions prepared from aniline-modified epoxy resins were higher than those of other emulsions. The crosslinked films prepared from aniline-modified epoxy resins were also glossier than those prepared from commercial epoxy resins. High deposition yield and high glossiness were the characteristic properties of the aniline-modified epoxy resins. Thermal properties were not affected by aniline-modified epoxy resins.