Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

Absorption effect in the calculation of a second-order nonlinear coefficient from the data of a maker fringe experiment

The effect of light absorption by sample in the analysis of Makerfringe data for estimating a second-order nonlinear coefficient hasbeen studied experimentally. Two theories, one by Jerphagnon andKurtz that neglects the absorption effect and one by Herman and Haydenthat takes into account the absorption effect, were compared with theexperimental results. It was found that Jerphagnon and Kurtz'sformula was unable to predict correctly not only the magnitude but alsothe incident angle dependence or the sample thickness dependence of thesecond harmonic signal generated by the sample with strong absorption, whereas the theory by Herman and Hayden was able to make thosepredictions fairly well. It was also found that the error in theestimated nonlinear coefficient when one uses Jerphagnon and Kurtz'sformula could be as large as 2-4 times the true value, depending onsample thickness.     

Tissue dynamics spectroscopy for three-dimensional tissue-based drug screening

Tissue dynamics spectroscopy combines dynamic light scattering with short-coherence digital holography to capture intracellular motion inside multicellular tumor spheroid tissue models. The cellular mechanical activity becomes an endogenous imaging contrast agent for motility contrast imaging. Fluctuation spectroscopy is performed on dynamic speckle from the proliferating shell and hypoxic core to generate drug-response spectrograms that are frequency versus time representations of the changes in spectral content induced by an applied compound or an environmental perturbation. A combination of 28 reference compounds and conditions applied to rat osteogenic UMR-106 spheroids generated spectrograms that were crosscorrelated in a similarity matrix used for unsupervised hierarchical clustering of similar compound responses. This work establishes the feasibility of tissue dynamics spectroscopy for three-dimensional tissue-based phenotypic profiling of drug response as a fully endogenous probe of the response of tissue to reference compounds.     

Memory effects of all‐solution‐processed oxide thin‐film transistors using ZnO nanoparticles

Abstract— Non‐volatile memory effects of an all‐solution‐processed oxide thin‐film transistor (TFT) with ZnO nanoparticles (NPs) as the charge‐trapping layer are reported. The device was fabricated by using a soluble MgInZnO active channel on a ZrHfO^x gate dielectric. ZnO NPs were used as the charge‐trapping site at the gate‐insulator—channel interface, and Al was used for source and drain electrodes. Transfer characteristics of the device showed a large clockwise hysteresis, which can be used to demonstrate its memory function due to electron trapping in the ZnO NP charge‐trapping layer. This memory effect has the potential to be utilized as a memory application on displays and disposable electronics.     

Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm

A scanning electron microscope (SEM) is a sophisticated equipment employed for fine imaging of a variety of surfaces. In this study, prediction models of SEM were constructed by using a generalized regression neural network (GRNN) and genetic algorithm (GA). The SEM components examined include condenser lens 1 and 2 and objective lens (coarse and fine) referred to as CL1, CL2, OL-Coarse, and OL-Fine. For a systematic modeling of SEM resolution (R), a face-centered Box–Wilson experiment was conducted. Two sets of data were collected with or without the adjustment of magnification. Root-mean-squared prediction error of optimized GRNN models are GA 0.481 and 1.96×10^-12 for non-adjusted and adjusted data, respectively. The optimized models demonstrated a much improved prediction over statistical regression models. The optimized models were used to optimize parameters particularly under best tuned SEM environment. For the variations in CL2 and OL-Coarse, the highest R could be achieved at all conditions except a larger CL2 either at smaller or larger OL-Coarse. For the variations in CL1 and CL2, the highest R was obtained at all conditions but larger CL2 and smaller CL1.     

Synthesis and characterization of novel blue azo‐dye derivatives containing acrylate group for dye‐based color filters

Abstract— Even though dyes have a fine resolution and good chromaticities, they are not widely used as coloring materials for color filters (CFs) due to their low thermal stability and chemical resistance. A series of azo‐dye derivatives, which consist of two cross‐linkable acrylate or methacrylate groups to improve thermal and chemical properties, have been synthesized and used to fabricate color filters. The spectral properties and chemical/thermal stabilities of the fabricated CFs were investigated by comparing dye‐based CFs, without a complicated dispersion process, but with pigment‐based CFs using dispersed pigment. Also, more properties including the development test and surface morphologies lithographic properties were studied. The synthesized azo dyes were characterized by elemental analysis, UV‐visible spectra, IR, mass, and ¹H‐NMR spectra.     

A dispatching method for automated lifting vehicles in automated port container terminals

In automated container terminals, containers are transported from the marshalling yard to a ship and vice versa by automated vehicles. The automated vehicle type studied in this paper is an automated lifting vehicle (ALV) that is capable of lifting a container from the ground by itself. This study discusses how to dispatch ALVs by utilizing information about pickup and delivery locations and time in future delivery tasks. A mixed-integer programming model is provided for assigning optimal delivery tasks to ALVs. A procedure for converting buffer constraints into time window constraints and a heuristic algorithm for overcoming the excessive computational time required for solving the mathematical model are suggested. Numerical experiments are reported to compare the objective values and computational times by a heuristic algorithm with those by an optimizing method and to analyze the effects of dual cycle operation, number of ALVs, and buffer capacity on the performance of ALVs.     

Response to ‘Comments on: A cohesion measure for object‐oriented classes’

Indicating that CBMC does not satisfy the monotonic property in terms of the number of interactions, Xu and Zhou proposed an augmented definition of CBMC by adopting cut set instead of glue methods. The augmented CBMC clearly satisfies the monotonic property. However, CBMC is designed to overcome the problem with respect to the number of interactions and, therefore, focuses on the interaction pattern, especially, member connectivity. Consequently, it does not make sense to mention the monotonic property of CBMC with respect to interaction number. Moreover, the notion of glue methods allows several interpretations on the design quality of a class. However, that meaningful interpretation is not possible for the augmented definition due to the removal of the notion of glue methods. Copyright © 2001 John Wiley & Sons, Ltd.     

Preparation of bao-pbo-nd2o3-tio2 powders by hydrothermal synthesis

Homogeneous and nano-sized BPNT [(Ba_1-xPb_x)Nd₂Ti₅O₁₄] powders were prepared under various hydrothermal conditions. Crystallinity and homogeneity of the synthetic powders were investigated. The microwave dielectric properties of the filters prepared with hydrothermal powders were compared with those of the filters prepared with conventional powders. The microwave dielectric properties of the filter prepared with the hydrothermal powders were also better than those of the filter manufactured with the conventional powders. The dielectric constant, quality constant and temperature coefficient of resonance frequency of hydrothermally prepared filter under optimum condition and measured at 3.5 GHz around were about 93, 6067 and 0 ppm/°C, respectively.