棒料径向夹紧精密剪切模

通过研究剪切模具对棒料剪切质量的影响因素,设计了一种适用于普通冲床的棒料精密剪切模具,该模具通过弹簧提供径向夹紧力,且径向夹紧机构与剪切刀具设在同一模具上.模具能够提高棒料剪切断面质量及下料效率,节约了生产成本.     

Process design for multi-stage stretch forming of aluminium alloy aircraft skin

A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method (FEM) to determine the minimum stage number and deformation amount of each stage. The strain distribution method was used to calculate the deformation amount of each stage and evaluate the formability through a safety criterion. FE simulation was taken as an analysis tool to reveal the deformation behaviour, to predict the strain contour and to determine the process parameters at each stage. To evaluate the effect of heat treatment after pre-strain on occurrence of deformation defects during the subsequent deformation, a multi-stage uniaxial tension test for 2B06 aluminium alloy sheet was carried out. A case study demonstrates that the approach has high reliability and good practicability.     

Improved model and 3D simulation of densification process for iron powder

A new model for describing the compaction process of iron powder was proposed based on the continuum hypothesis and elliptical yield criterion. To simulate the densification behaviour, the constitutive model was implemented in Marc computer program. For the relationship between load and displacement, different models were compared and the influence of the parameters in the constitutive equations was determined by means of simulation and experiments. The density distribution of a balancer was measured and simulated. The results show that the parameter η adopted plays a modification role for the load-displacement curve, and compared with other models the present model fits better with the experimental data in the later stage of the compaction process mainly due to the different parameters A and B. The friction on the contact surface contributes to the inhomogeneous density distribution under large deformation of the workpiece. The comparison between the simulation and experimental data indicates that this model can be used to predict the powder compact process precisely and effectively.     

焊接特殊过程确认

焊接产品的性能只能用抽检的方式间接检测。通过对焊接产品多种性能和焊接质量的检测,甄别出全部的过程因素及其波动范围,确认焊接全部过程因素的允许波动范围是特殊过程确认的核心内容,是间接检测焊接产品性能成立的前提条件。     

基于神经网络的焊接故障诊断研究

针对焊接时容易产生气孔这个缺陷,引入了神经网络技术对气孔缺陷进行诊断,结果表明基于神经网络算法的焊接诊断稳定性好,诊断速度快,这说明该诊断技术具有很大的应用价值。     

基于OrCAD/PSpice9的电路优化设计

提出了基于OrCAD/PSpice9的电路优化设计方法,介绍了OrCAD/PSpice9的特点,通过实例借助于计算机来完成数据处理、模拟评价、设计验证等工序,实现电子系统或电子产品的整个或大部分设计过程,并说明了基于OrCAD/PSpice9环境下的电路优化设计过程。     

江西省农村计划生育适宜技术供方使用评价分析

目的探讨江西省计划生育适宜技术供方使用及评价情况。方法采用分层整群抽样的方法,对5个示范县228例医务人员使用4项计划生育适宜技术情况进行问卷调查。结果医务人员对4项计划生育适宜技术总体满意度为76.2%。对4项技术的满意率存在明显差异（P〈0.001）。4项计划生育技术的诊疗效果、操作简便、病人易接受、适宜性、安全性、节约时间、省钱等方面的满意率分别为96.5%、93.4%、92.5%、97.8%、98.2%、92.5%、83.3%。多因素逐步Logistic回归分析结果显示：技术使用者的专业技术职称越高越容易推广,对技术掌握的程度越熟练越容易推广,适宜技术价格越贵越不容易推广,诊疗效果满意则易于推广。结论江西省农村卫生适宜技术使用推广效果好。适宜技术的推广宜选用职称高、技术熟练、价格相对较低、疗效较为满意的技术开展推广运用。     

瓦斯抽放系统联网的必要性和可行性探讨

采区抽放系统是对地面抽放系统的一个补充,如何最大限度的发挥2个抽放系统的作用,是联网抽放还是各自独立工作,主要从抽放网络压力分布和泵抽放流量2个方面来判断局部抽放系统并入地面抽放系统的必要性和可行性。     

火灾作用下钢管混凝土结构力学性能的研究综述

<正>一、研究概况1.国外研究概况国内外学者对钢管混凝土在受火时的工作机理研究已取得了一系列重要成果,为进一步在该领域开展深入的研究工作创造了条件。由于组成钢管混凝土的钢管和其核心混凝土之间相互贡献、协同互补、共同工作的优势,使其具有优于钢结构     

双层预埋管在核电站建设中的应用与施工

介绍了核电站疏水排气系统中双层预埋管的预制、安装及其与上下游的连接。