矿山地质环境恢复治理技术方法研究

自工业革命以来人类社会的发展和经济的建设就离不开对矿产资源的使用。我国自改革开放以来,经济得到了前所未有的飞速发展,人民的生活水平日益提高,但经济高速发展的背后,存在着对矿产资源过度开采和使用的问题。矿产资源的不合理开采和使用对原有的自然环境造成了严重的破坏,为了改善此现状,对矿山地质环境的恢复治理技术的研究就至关重要。本文就矿山地质恢复治理的意义进行阐述,进一步对其方法进行探究,最终提出有关的措施和方法。     

积分中值屈服准则解析厚板轧制椭圆速度场

为解决非线性Mises比塑性功率积分困难以及由此导致的轧制功率解析式难以获得的问题,本文通过建立并利用线性比塑性功率表达式对提出的椭圆速度场进行能量分析,得到了轧制力能参数的解析解.文中通过对变角度屈服函数求积分中值,构建了一个新的屈服准则,它是主应力分量的线性组合,在π平面上的轨迹是逼近Mises圆的等边非等角的十二边形,其基于Lode参数表达式的理论结果也与实验数据吻合较好.同时,根据厚板轧制时金属流动速度从入口到出口逐渐增大的特点,提出了水平速度分量满足椭圆方程的速度场,该速度场满足运动许可条件.通过相应的轧制能量分析,获得了基于线性屈服准则的内部变形功率以及基于应变矢量内积法上的摩擦功率与剪切功率.在此之上,通过泛函的极值变分导出了轧制力矩、轧制力以及应力状态系数的解析解,并与现场实测数据进行了对比,结果表明利用本文提出的屈服准则与速度场所建立的轧制力矩与轧制力模型与实测值吻合较好,其中轧制力误差小于5.3%,轧制力矩误差在6%左右.     

Design of novel urogenital pharmabiotic formulations containing lactobacilli,salivaricin CRL 1328 and non-microbial compounds with different functionalities

Context: The administration of pharmabiotics is a promising alternative to antimicrobial drugs for the treatment and/or prevention of female urogenital infections.

Objective: To design pharmabiotic formulations including bioactive ingredients of microbial origin combined with non-microbial substances and then to evaluate the stability of the combinations during freeze-drying and storage.

Materials and methods: Different formulations including Lactobacillus gasseri CRL 1263, Lactobacillus salivarius CRL 1328, salivaricin CRL 1328 (a bacteriocin) and non-microbial compounds (lactose, inulin and ascorbic acid) were assayed, and the ingredients were freeze-dried together or separately. The formulations were stored in gelatin capsules at 4?°C for 360?d.

Results: The viability of lactobacilli was affected to different extents depending on the strains and on the formulations assayed. L. salivarius and ascorbic acid were successfully combined only after the freeze-drying process. Salivaricin activity was not detected in formulations containing L. gasseri. However, when combined with ascorbic acid, lactose, inulin or L. salivarius, the bacteriocin maintained its activity for 360?d. The selected microorganisms proved to be compatible for their inclusion in multi-strain formulations together with lactose, inulin and ascorbic acid. Salivaricin could be included only in a L. salivarius CRL 1328 single-strain formulation together with non-microbial substances.

Conclusions: This study provides new insights into the design of urogenital pharmabiotics combining beneficial lactobacilli, salivaricin CRL 1328 and compounds with different functionalities.     

Photopolymerization synthesis of polyacrylic acid dispersant with methoxysilicon end groups and its application in a nano‐SiO2 aqueous system

In order to improve the dispersity and stability of the nano‐SiO₂ aqueous system with high solid content, a kind of polyacrylic acid dispersant with methoxysilicon end groups (KH590‐PAA) was synthesized by photopolymerization of acrylic acid (AA) initiated with (3‐mercaptopropyl)trimethoxysilane (KH590). After adding KH590‐PAA into the nano‐SiO₂ aqueous dispersion system (20 wt% solid content), the viscosity and the curing time of the system were measured with a rotational viscometer and the inverted bottle method. Moreover, the dispersion mechanism of KH590‐PAA for the nano‐SiO₂ aqueous system was researched by measuring the adsorption capacity, the particle size and the zeta potential of the nanoparticles with a conductivity meter, dynamic light scattering, SEM and TEM, respectively. The results showed that the methoxysilicon groups in KH590‐PAA could react with hydroxyl groups on the surface of nano‐SiO₂ in the process of stirring, which enhanced the adsorption capacity of the dispersant and then increased the surface charge of the particles. Therefore, electrostatic repulsion and steric hindrance effects between the SiO₂ nanoparticles could be further enhanced by adding the KH590‐PAA dispersant, and then the nano‐SiO₂ aqueous system exhibited better dispersity and stability. Besides, the dispersion properties of SiO₂ nanoparticles in water were closely related to the addition amount and the molecular weight of the KH590‐PAA dispersant. © 2018 Society of Chemical Industry     

靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

中子平衡节块离散纵标法及CMFD加速技术研究

本文基于横向积分离散纵标方程,解析得到横向积分通量中出射通量与入射通量的关系,并根据类似于扩散方程节块展开法的输运节块中子平衡方程形式,得到了一种高效的节块离散纵标法数值迭代策略。数值结果表明,本文提出的方法可行且数值结果正确。此外,粗网有限差分(CMFD)加速技术在节块离散纵标法中也取得了非常好的应用效果。     

原子吸收光谱法测定保护渣中锰含量

采用原子吸收光谱法测定保护渣中锰含量,进行了酸度对测定的影响、试样分解、共存离子干扰、加标回收、精密度分析等试验。结果表明,锰可完全溶解于混合酸溶液中;加入氯化锶,可以消除钠、钙对锰测定的干扰;锰质量浓度在0~12.0μg/mL的范围,工作曲线线性关系良好;加标回收率较高,在97%~102%;测定结果准确度较高,与高碘酸钠光度法分析结果一致性较好。