国内弧焊设备电磁兼容性研究进展

焊弧设备的电磁兼容性问题日益突出，受到越来越多的关注。针对我国的实际情况，对国内弧焊设备的研究现状进行了综合分析，同时指出了今后的研究方向。     

凝固速率对定向凝固合金DZ22枝晶臂间距和枝晶偏析的影响

采用新研制的超高梯度定向凝固装置，研究了不同凝固速率下定向凝固高温合金ＤＺ２２枝晶臂间距和枝晶偏析。结果表明，冷运速率增大，枝晶臂间距显著细化，枝晶偏析被强烈抑制。当冷运速率为５２．４Ｋ．ｓ＾－１时，一次、二次枝晶臂间距λ１和λ２分别为２８．８和８．４μｍ，Ｎｂ，Ｔｉ，Ａｌ，Ｃｒ，Ｃｏ，Ｗ等元素的偏析比均趋近于１。     

金属磁记忆检测技术概况及初步应用

介绍金属磁记忆检测技术的背景、发展、现状、目的和意义，用两个应用实例初步评价了磁记忆检测技术的有效性，提出了磁记忆技术发展的近期和远期目标，展望了应用前景。     

超音速微粒轰击表面纳米化及其对耐磨性的影响

采用超音速微粒轰击技术对20钢进行表面纳米化处理。研究了表面纳米化工艺对材料流失与形貌变化的影响，并采用往复磨损试验机研究了纳米化表面的磨损性能。结果表明：超音速微粒轰击在表面形成纳米层过程中使材料发生流失和表面粗糙度增大。在干摩擦和油润滑条件下，微粒轰击样品的磨损率分别是未轰击样品的2．77和1．83倍，轰击抛光样品的磨损率则比未轰击样品分别降低了26％和42％。对其影响耐磨性的原因作了初步讨论。     

Borides at interfacial zone of IC6 TLP bonded joints

1　INTRODUCTIONTransientliquidphase (TLP)bondingtechniquehasbeensuccessfullyusedinjoiningheatresistantal loys ,likeHastelloyX ,Inconel713C ,In10 0 ,Udimet5 0 0 ,70 0 ,MarM 2 0 0 ,0 0 7,2 4 7,30 2 ,Rene′80 ,TD NiCr ,MA75 4,6 0 0 0 ,PWA14 2 2 ,CSMX 2etc ,whicharesusceptibletohotcrackingor post weldheat treatmentcrackingproblemsduringfusionweld ing[14 ] .Inaddition ,therewerereportsofjoiningNiAlandTiAlintermetallicsbyTLPbondingmethod[510 ] .Forexample ,Galehadinvestigatedthemic…     

铝电解用TiB_2阴极涂层固化、炭化的升温制度

采用DTG ,DDTA等热分析手段 ,研究了高温固化、炭化过程中 ,铝电解用TiB2 阴极涂层糊料的质量和能量的变化速率 ,制定了涂层的变速固化、炭化升温制度 ;在此基础上 ,研究了升温制度对TiB2 阴极涂层性能的影响。结果表明 :变速升温制度优于匀速升温制度 ,采用变速固化、炭化升温制度所制备的涂层形变小、无裂纹 ,其抗拉强度达 3.13MPa,电阻率为 2 3.2 μΩ·m ;而采用升温速度为 10 .3℃ /h的匀速固化、炭化升温制度制备的涂层形变大、裂纹多 ,抗拉强度小 (2 .6 9MPa) ,电阻率大 (2 8.6 μΩ·m)。     

Study on sintering process and characteristic of nanosized soft magnetic MnZn ferrite powders

The effect of sintering process (especially the sintering temperature) on the magnetic property and microstructure of sintered sample of nanosized soft magnetic MnZn ferrite powder was investigated. The sintered sample of MnZn ferrite was prepared by both traditional pressing and cool isostatic pressing on MnZn ferrite nanoparticals. The sintering process of which was segmented. Thedensity, microstructure and phase composition of sintered sample were analyzed by Archimedes'law, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The grain growth and densification in sintering process of MnZn ferrite were investigated. The magnetic property was measured by vibrating sample magnetometer (VSM) and Nim2000 magnetic material testing system. The results show that the better sintering temperature is 850 ℃, at which the better magnetic property and microstructure of sintered compact were obtained.     

(ZrAl3+ZrB2)/Al复合材料的制备和微观组织结构

采用混合盐反应法,以KBF4和K2ZrF6粉剂为原料在铝熔融体中制备了(ZrAl3 ZrB2)/Al复合材料.借助于X射线衍射仪、电子探针和透射电镜对复合材料的物像和增强相进行了观察,结果表明ZrB2颗粒呈等轴或等轴颗粒状,为六方结构,尺寸大部分小于1μm,ZrAl3相大部分呈长条状,两种增强相整体分布较为均匀,且与Al的界面光滑洁净,没有其它界面生成物.对复合材料的硬度做了测试,原位合成增强相的引入显著提高了复合材料的HRB硬度.     

LaNi5的电子结构

采用总体能量平面波赝势方法, 并结合超软赝势技术, 计算了金属La、 Ni及合金LaNi5的总体能量、能带结构、电子态密度以及Mulliken布居值. 根据计算结果, 分析了La、 Ni和LaNi5的电子结构. 结果表明: 形成合金后费米面能量位置漂移, 介于Ni和La的费米面之间, 费米面上主要是Ni 3d电子; 费米面附近导带的电子结构变化较大; 合金中La和Ni间存在电子转移, 形成了弱的La-Ni键, 且带部分离子性; 与纯金属相比, 形成合金后La的稳定性增强, 而Ni的稳定性减弱. 计算了LaNi5的理论生成热, 结果能较好地符合实验值.     

Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.