Effect laws and mechanisms of different temperatures on isothermal tensile fracture morphologies of high-strength boron steel

The fracture behaviour and morphologies of high-strength boron steel were investigated at different temperatures at a constant strain rate of 0.1 s-1 based on isothermal tensile tests. Fracture mechanisms were also analyzed based on the relationship between microstructure transformation and continuous cooling transformation(CCT) curves. It is found that 1) fractures of the investigated steel at high temperatures are dimple fractures; 2) the deformation of high-strength boron steel at high temperatures accelerates diffusion transformations; thus, to obtain full martensite, a higher cooling rate is needed; and 3) the investigated steel has the best plasticity when the deformation temperature is 750 °C.     

双馈风机低电压穿越的改进技术

为提高电压跌落条件下双馈风电机组的运行稳定性,介绍了crowbar与chopper共同配合作用的低电压穿越技术,并从提高crowbar阻值整定上限这一角度通过理论分析与仿真验证说明了crowbar与chopper配合作用的优势。提出低电压穿越过程中机侧变流器的无扰切换控制方法,通过仿真验证了这种方法可以大大减少crowbar投切次数与低穿过渡时间,且控制简单可行。     

A Student's t-based density peaks clustering with superpixel segmentation (tDPCSS) method for image color clustering

Image color clustering is a basic technique in image processing and computer vision, which is often applied in image segmentation, color transfer, contrast enhancement, object detection, skin color capture, and so forth. Various clustering algorithms have been employed for image color clustering in recent years. However, most of the algorithms require a large amount of memory or a predetermined number of clusters. In addition, some of the existing algorithms are sensitive to the parameter configurations. In order to tackle the above problems, we propose an image color clustering method named Student's t-based density peaks clustering with superpixel segmentation (tDPCSS), which can automatically obtain clustering results, without requiring a large amount of memory, and is not dependent on the parameters of the algorithm or the number of clusters. In tDPCSS, superpixels are obtained based on automatic and constrained simple non-iterative clustering, to automatically decrease the image data volume. A Student's t kernel function and a cluster center selection method are adopted to eliminate the dependence of the density peak clustering on parameters and the number of clusters, respectively. The experiments undertaken in this study confirmed that the proposed approach outperforms k-means, fuzzy c-means, mean-shift clustering, and density peak clustering with superpixel segmentation in the accuracy of the cluster centers and the validity of the clustering results.     

Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride

Thermally conductive polymers offer new possibilities for the heat dissipation in electric and electronic components, for example, by a three‐dimensional shaping of the heat sinks. To face safety regulations, improved fire performance of those components is required. In contrast to unfilled polymers, those materials exhibit an entirely different thermal behavior. To investigate the flammability, a phosphorus flame retardant was incorporated into thermally conductive composites of polyamide 6 and hexagonal boron nitride. The flame retardant decreased the thermal conductivity only slightly. However, the burning behavior changed significantly, due to a different heat propagation, which was investigated using a thermographic camera. An optimum content of hexagonal boron nitride for a sufficient thermal conductivity and fire performance was found between 20 and 30 vol%. The improvement of the fire performance was due to a faster heat release out of the pyrolysis zone and an earlier decomposition of the flame retardant. For higher contents of hexagonal boron nitride, the heat was spread faster within the part, promoting an earlier ignition and increasing the decomposition rate of the flame retardant.     

Facile synthesis of Li 2 ZrO 3 -modified LiNi 0.5 Mn 0.5 O 2 cathode material from a mechanical milling route for lithium-ion batteries

Li2ZrO3-modified LiNi0.5Mn0.5O2 materials with improved electrochemical performance were directly synthesized by a simple mechanical milling route with ZrO2, Li2CO3 and Ni0.5Mn0.5(OH)2 precursors...     

纳米氧化物对水泥基料化学收缩的影响

采用ASTM化学收缩试验方法,研究纳米SiO2、MgO、Al2O3对水泥基材料化学收缩变化的影响,明确纳米材料种类的差异性。结果表明,各实验组水泥基材料化学收缩均经历三阶段:急速变化区、缓慢变化区、平稳区,7d始水泥基材料化学收缩基本稳定。几种纳米材料的最佳掺量对水泥基材料的化学收缩改善作用大小为:SiO2>Al2O3>MgO。研究发现,纳米材料种类和掺量的不同对化学收缩的影响也较大,在选用时,需综合考虑。     

一种快速解压的无损压缩算法

随着信息技术的不断发展,大量数据给存储和传输都带来了巨大的挑战。数据压缩能够有效减少数据量,方便数据的处理和传输。无损压缩是一种利用数据的冗余特点进行压缩的压缩方法,解压时可以完全还原数据而不会有任何失真。在研究LZO算法的快速解压原理基础上,设计了一种新的压缩算法。该算法通过减少压缩数据中压缩块的数量,降低了解压程序的执行开销。测试结果表明,新算法可实现比LZO算法更快的解压速度。     

基于“IPv6+”的智能IP网络方案

随着第4次工业革命的到来，人类社会正逐步迈向万物互联的智能时代。智能时代需要更加自动化、智能化的IP网络，基于“IPv6+”的SRv6、BIERv6等技术是使能新一代IP网络的关键基础。全面阐述了“IPv6+”的技术内涵，结合华为在智能 IP 网络解决方案上的创新和思考，介绍了“IPv6+”在极简连接、SLA 保障、专网体验、质量感知和云网一体等多个解决方案场景的关键技术与典型应用，助力5G与云业务发展。