Development of a method employing reversed‐phase thin‐layer chromatography for establishing milk fat purity with respect to adulteration with vegetable oils

A systematic study was conducted using reversed‐phase thin‐layer chromatography wherein unsaponifiable matter of samples namely, pure cow and buffalo milk fats, vegetable oils (groundnut oil, soya bean oil and sunflower oil) and milk fats adulterated with vegetable oils (≥1%) were run along with the reference standards using two new solvent systems to detect adulteration in milk fat. The results of the study revealed that adulteration at even a 1% level could easily be detected using this rapid, reliable and reproducible method based on the presence of β‐sitosterol as a marker and some additional spots ascribable to their occurrence in vegetable oils only.     

Changes in lipids and their contribution to the taste of migaki-nishin (dried herring fillet) during drying

This study was conducted to investigate the changes in lipids and their effect on the taste of migaki-nishin during drying. Lipid was extracted from herring fillets following different drying stages to measure the degree of lipid oxidation and changes in lipid composition, and fatty acid profile. Peroxide value, carbonyl value and acid value of the lipids were significantly increased (P < 0.05) during the drying period. Marked increase in free fatty acids, with decreases in triglyceride and phospholipid content were observed in proportion to drying time and this result suggested that hydrolysis was induced by lipases and phospholipases. The decreases in polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), were observed in the total lipids and phospholipid fraction. In addition, significant increase in PUFAs especially DHA was found in the free fatty acid fraction. Sensory evaluation showed that an addition of DHA to mentsuyu significantly (P < 0.05) enhances the intensities of thickness, mouthfulness and continuity. These results suggest that during drying period lipid oxidation was not only occurred but also lipolysis predominantly released DHA, which might have a contribution to kokumi enhancement of migaki-nishin.     

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

Journal of Materials Science: Materials in Electronics - A photoelectrochemical (PEC) water splitting ability of pure ZnO and manganese-incorporated ZnO thin films fabricated via a simple...     

冷加工和时效处理顺序对6061铝合金力学性能的影响(英文)

研究不同的析出硬化和冷加工组合对6061铝合金拉伸性能的影响。结果表明,在不同的热处理过程中,在180℃单时效4h能提高合金的强度和伸长率。然而,双时效处理不能改善其力学性能。另外,预时效对随后的析出硬化有负面影响。合金力学性能的变化归因于析出硬化、应变硬化和加工软化的竞争而引起的显微组织演变。     

Applying a normalized ratio scale technique to assess influences of urban expansion on land surface temperature of the semi-arid city of Erbil

The difference between surface and air temperature within a city and its surrounding area is a result of variations in surface cover, thermal capacity, and 3-dimensional geometry. This research has examined and quantified the decreasing daytime land surface temperature (LST) in Erbil, Kurdistan region of Iraq, and the influence of rapid urban expansion on urban heat/cool island effect over a 20 year period. Land-use/land-cover change across this time period is also established using pixel samples. The current study proposes the application of the normalized ratio scale (NRS) to adjust the temperature of images acquired at different dates to the same range. Eleven satellite images acquired by Landsat 4, 5, 7, and 8 during the period 1992–2013 are used to retrieve LST. The results indicate that 55.3 km² of city land cover changed from bare soil to urban; consequently, the mean LST of the new urbanized area decreased by 2.28°C. The normalized difference vegetation index (NDVI) of Sami Abdul-Rahman (S.A.) Park increased from 0.09 ± 0.01 to 0.32 ± 0.11, resulting in a decrease of the mean LST by 7.29°C. This study shows that the NRS method is appropriate for detecting temperature trends from urbanization using remote-sensing data. It also highlights that urban expansion may lead to a decrease in daytime LST in drylands.     

Stochastic nonlinear failure analysis of laminated composite plates under compressive transverse loading

This paper present the second ordered statistics of first-ply failure response of laminated composite plate with random material properties under random loading. The basic formulation is based on higher order shear deformation plate theory (HSDT) with the geometrically nonlinearity in the von-Karman. The direct iterative based C⁰ nonlinear finite element method combined with mean centered first order perturbation technique developed by the authors are extended and successfully applied nonlinearity for failure problem with a reasonable accuracy to predict the second order statistics (standard deviation) of first-ply failure response using Tsai-Wu and Hoffman failure criterion with macroscopic analysis. Typical numerical results for various combinations of boundary conditions, plate thickness ratios, aspect ratios, laminates scheme and layers, elastic modulus ratios have been presented to illustrate the application of developed procedure. Some new results are presented and examined which clearly demonstrated the importance of the randomness in the system parameters in the failure response of the structures subjected to transverse loadings.     

Pre-aging time dependence of microstructure and mechanical properties in nanostructured Al-2wt%Cu alloy

This work is focused on the effect of pre-aging time on the properties of Al-2wt%Cu alloy processed by accumulative roll bonding (ARB) process. Following aged at 190 °C for 10 or 30 min, the samples were deformed up to a strain of 4.8 by the ARB process. The microstructure evolution was investigated by transmission electron microscope and electron backscattering diffraction analyzes. The results showed that the Al₂Cu precipitates were formed with different sizes due to the different pre-aging times and the finer precipitates were more effective on the formation of high angle grain boundaries during the ARB process. The grain size of Aged-10 min and Aged-30 min specimens decreased to 400 nm and 420 nm, respectively, after 6 cycles of the ARB process. Also, the final texture after 6 cycles of the ARB process, shown in the {111} pole figure, were different depending on the starting microstructures. The mechanical properties of specimens were investigated by the Vickers microhardness measurements and the tensile tests. The results showed that the mechanical properties are affected by the starting microstructure. The mechanical properties of Aged-10 min specimen were different compared to Aged-30 min specimen due to the different size of the pre-existing precipitates. Although by continuing process, the precipitates were probably dissolved due to the heavy deformation.