磺酸盐型二聚表面活性剂的合成研究进展

磺酸盐型表面活性剂具有良好的界面活性及耐温抗盐等性能而广受国内外学者关注。本文基于磺酸基团的引入方法,重点综述了近10年来磺酸盐型二聚表面活性剂的合成,简要介绍了产物的表/界面张力、临界胶束浓度等物化性质,并指出其今后的发展方向。     

Mechanism and Simulation of Removal Rate and Surface Roughness During Optical Polishing of Glasses

Glass optics with ultra‐low roughness surfaces (<2 Å rms) are strongly desired for high‐end optical applications (e.g., lasers, spectroscopy, etc.). The complex microscopic interactions that occur between slurry particles and the glass workpiece during optical polishing ultimately determine the removal rate and resulting surface roughness of the workpiece. In this study, a comprehensive set of 100 mm diameter glass samples (fused silica, phosphate, and borosilicate) were polished using various slurry particle size distributions (PSD), slurry concentrations, and pad treatments. The removal rate and surface roughness of the glasses were characterized using white light interferometry and atomic force microscopy. The material removal mechanism for a given slurry particle is proposed to occur via nano‐plastic deformation (plastic removal) or via chemical reaction (molecular removal) depending on the slurry particle load on the glass surface. Using an expanded Hertzian contact model, called the Ensemble Hertzian Multi‐gap (EHMG) model, a platform has been developed to understand the microscopic interface interactions and to predict trends of the removal rate and surface roughness for a variety of polishing parameters. The EHMG model is based on multiple Hertzian contacts of slurry particles at the workpiece–pad interface in which the pad deflection and the effective interface gap at each pad asperity height are determined. Using this, the interface contact area and each particle's penetration, load, and contact zone are determined which are used to calculate the material removal rate and simulate the surface roughness. Each of the key polishing variables investigated is shown to affect the material removal rate, whose changes are dominated by very different microscopic interactions. Slurry PSD impacts the load per particle distribution and the fraction of particles removing material by plastic removal. The slurry concentration impacts the areal number density of particles and fraction of load on particles versus pad. The pad topography impacts the fraction of pad area making contact with the workpiece. The glass composition predominantly impacts the depth of plastic removal. Also, the results show that the dominant factor controlling surface roughness is the slurry PSD followed by the glass material's removal function and the pad topography. The model compares well with the experimental data over a variety of polishing conditions for both removal rate and roughness and can be extended to provide insights and strategies to develop practical, economic processes for obtaining ultra‐low roughness surfaces while simultaneously maintaining high material removal rates.     

Nanoscratching of Optical Glass Surfaces Near the Elastic–Plastic Load Boundary to Mimic the Mechanics of Polishing Particles

The nanomechanical deformations on glass surfaces near the elastic–plastic load boundary have been measured on various glasses by nanoscratching using an atomic force microscope (AFM) to mimic the mechanical interactions of polishing particles during optical polishing. Nanoscratches were created in air and aqueous environments using a 150‐nm radius diamond‐coated tip on polished fused silica, borosilicate, and phosphate glass surfaces; the topology of the nanoscratches were then characterized by AFM. Using load ranges expected on slurry particles during glass polishing (0.05–200 μN), plastic‐type scratches were observed with depths in the nm range. Nanoscratching in air generally showed deeper & narrower scratches with more pileup compared to nanoscratching in water, especially on fused silica glass. The critical load needed to observe plastic deformation was determined to range from 0.2–1.2 μN for the three glasses. For phosphate glass, the load dependence of the removal depth was consistent with that expected from Hertzian mechanics. However, for fused silica and borosilicate glass in this load range, the deformation depth showed a weak dependence with load. Using a sub‐T_g annealing technique, material relaxation was observed on the nanoscratches, suggesting that a significant fraction of the deformation was due to densification on fused silica and borosilicate glass. Repeated nanoscratching at the same location was utilized for determining the effective incremental plastic removal depth. The incremental removal depth decreased with increase in number of passes, stabilizing after ~10 passes. In water, the removal depths were determined as 0.3–0.55 nm/pass for fused silica, 0.85 nm/pass for borosilicate glass, and 2.4 nm/pass for phosphate glass. The combined nanoscratching results were utilized to define the composite removal function (i.e., removal depth) for a single polishing particle as a function of load, spanning the chemical to the plastic removal regimes. This removal function serves as an important set of parameters in understanding material removal during polishing and the resulting workpiece surface roughness.     

The effects of visibility conditions,traffic density,and navigational challenge on speed compensation and driving performance in older adults

Research on how older drivers react to natural challenges in the driving environment is relevant for both the research on mental workload and that on age-related compensation. Older adults (M age = 70.8 years) were tested in a driving simulator to assess the impact of three driving challenges: a visibility challenge (clear day, fog), a traffic density challenge (low density, high density) and a navigational challenge (participants followed the road to arrive at their destination, participants had to use signs and landmarks). The three challenge manipulations induced different compensatory speed adjustments. This complicated interpretation of the other measures of driving performance. As a result, speed adjustment indices were calculated for each condition and participant and composite measures of performance were created to correct for speed compensation. (These speed adjustment indices correlated with vision test scores and subscales of the Useful Field of View^®.) When the composite measures of driving performance were analyzed, visibility × density × navigational challenge interactions emerged for hazard RT and SD of lane position. Effects were synergistic: the impact of the interaction of challenge variables was greater than the sum of independent effects. The directions of the effects varied depending on the performance measure in question though. For hazard RT, the combined effects of high-density traffic and navigational challenge were more deleterious in good visibility conditions than in fog. For or SD of lane position, the opposite pattern emerged: combined effects of high-density traffic and navigational challenge were more deleterious in fog than in clear weather. This suggests different aspects of driving performance tap different resources.     

Injectable Platelet-Rich Fibrin as a Drug Carrier Increases the Antibacterial Susceptibility of Antibiotic—Clindamycin Phosphate

The aim of this study was to investigate the change in clindamycin phosphate antibacterial properties against Gram-positive bacteria using the platelet-rich fibrin as a carrier matrix, and evaluate the changes in the antibiotic within the matrix. The antibacterial properties of CLP and its combination with PRF were tested in a microdilution test against reference cultures and clinical isolates of Staphylococcus aureus (S. aureus) or Staphylococcus epidermidis (S. epidermidis). Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analysis was done to evaluate the changes in the PRF_CLP matrix. Release kinetics of CLP was defined with ultra-performance liquid chromatography (UPLC). According to FTIR data, the use of PRF as a carrier for CLP ensured the structural changes in the CLP toward a more active form of clindamycin. A significant decrease in minimal bactericidal concentration values (from 1000 µg/mL to 62 µg/mL) against reference cultures and clinical isolates of S. aureus and S. epidermidis was observed for the CLP and PRF samples if compared to pure CLP solution. In vitro cell viability tests showed that PRF and PRF with CLP have higher cell viability than 70% after 24 h and 48 h time points. This article indicates that CLP in combination with PRF showed higher antibacterial activity against S. aureus and S. epidermidis compared to pure CLP solution. This modified PRF could be used as a novel method to increase drug delivery and efficacy, and to reduce the risk of postoperative infection.     

Effects of milk replacer feeding strategies on performance,ruminal development,and metabolism of dairy calves

Performance, rumen development, and metabolism of male Holstein calves (n = 54) were evaluated according to 1 of 3 liquid feeding strategies: 4 L of milk replacer (MR)/d until 60 d old (4L-60d), 6 L of MR/d until 29 d old and 4 L/d from 30 to 60 d (6L-29d/4L-60d), or 6 L of MR/day until 60 d old (60d-6L). Water and starter were provided ad libitum. Intakes of MR and starter were monitored daily and body weight (BW) weekly. Blood samples for glucose and insulin concentrations and ruminal content samples for volatile fatty acids and ruminal ammonia concentrations were collected at 15, 30, 45, 60, 75, and 90 d of age. Six calves on each treatment were euthanized at 30, 60, and 90 d of age. Empty weights of forestomach and abomasum, papillae length, and mitotic index were measured. Average MR intake/d (expressed as a percent of BW) was greater for calves receiving 6 L/d than for those receiving 4 L/d until 30 d of age. Calves on the 6L-29d/4L-60d had the smallest MR intake from 30 to 60 d old, followed by the 4L-60d and 6L-60d treatments. Starter intake (kg of dry matter/day) did not differ between groups. It increased from 0.065 kg/d in the first month to 0.386 kg/d in the second month, and to 2.065 kg/d after weaning. Weight gain was greater for calves fed more MR in the first month, but no difference was observed during the second month. After weaning, 6L-60d calves had greater rate of weight gain than others and were heavier at 30, 60, and 90 d of age. Weight of empty forestomachs, ruminal pH, and ammoniac nitrogen concentration were not different among groups. Propionate concentration was lower for 6L-60d calves, but acetate and butyrate concentrations were not influenced by MR feeding strategy. Calves fed more MR until d 30 had greater ruminal epithelium mitotic index. The different MR feeding strategies did not influence papillae length or ruminal epithelium thickness. Lesions such as ruminal parakeratosis or hyperkeratosis were not observed. The MR feeding strategy did not affect glucose concentration, but insulin was higher in 6L-60d calves than in the other groups. Glucose concentration increased with age, whereas insulin decreased until 45 d old, and then started to increase until 90 d. In conclusion, MR feeding strategy did not influence ruminal development. Feeding calves 6 L of MR/d over 60 d resulted in greater rate of weight gain without negative effects on starter intake or forestomach development. The weight advantage that 6L-60d calves obtained preweaning was maintained until 90 d of age.     

Electronic Nose Functionality for Breath Gas Analysis during Parabolic Flight

The presence of humans in space represents a constant threat for their health and safety. Environmental factors such as living in a closed confinement, as well as exposure to microgravity and radiation, are associated with significant changes in bone metabolism, muscular atrophy, and altered immune response, which has impacts on human performance and possibly results in severe illness. Thus, maintaining and monitoring of crew health status has the highest priority to ensure whole mission success. With manned deep space missions to moon or mars appearing at the horizon where short-term repatriation back to earth is impossible the availability of appropriate diagnostic platforms for crew health status is urgently needed. In response to this need, the present experiment evaluated the functionality and practicability of a metal oxide based sensor system (eNose) together with a newly developed breath gas collecting device under the condition of altering acceleration. Parabolic flights were performed with an Airbus A300 ZeroG at Bordeaux, France. Ambient air and exhaled breath of five healthy volunteers was analyzed during steady state flight and parabolic flight maneuvres. All volunteers completed the study, the breath gas collecting device valves worked appropriately, and breathing through the collecting device was easy and did not induce discomfort. During breath gas measurements, significant changes in metal oxide sensors, mainly sensitive to aromatic and sulphur containing compounds, were observed with alternating conditions of acceleration. Similarly, metal oxide sensors showed significant changes in all sensors during ambient air measurements. The eNose as well as the newly developed breath gas collecting device, showed appropriate functionality and practicability during alternating conditions of acceleration which is a prerequisite for the intended use of the eNose aboard the International Space Station (ISS) for breath gas analysis and crew health status monitoring. The observed changes in breath gas composition are most likely associated with changes in ambient air volatile organic and inorganic compound composition and require further evaluation.     

Fruit consumption and adiposity status in adults: A systematic review of current evidence

The aim of this review was to update current understanding of the potential association between fruit consumption and adiposity status in adult populations. Electronic databases were searched from January 1, 1997 to the search date of August 15, 2014, retrieving 4382 abstracts that were reviewed for eligibility: randomized controlled trial (RCT) or prospective cohort (PC), published in English, assessing the effect of whole fruit or fruit juice consumption on adiposity in healthy adult populations. Quality ratings for the 11 included RCTs were either positive (n = 2), neutral (n = 8), or negative (n = 1), while the six included PCs were either positive (n = 4) or neutral (n = 2). Consumption of whole fruit was found to contribute to a reduced risk for long-term weight gain in middle-aged adults. Experimental trials suggest this beneficial effect of whole fruit is mediated by a reduction in total energy intake. Fruit juice, however, had an opposing effect, promoting weight gain over the long term. This review reinforces national food-based dietary guidelines, encouraging the consumption of whole fruits and replacing fruit juices with plain water, as part of a broader set of dietary strategies to reduce total dietary energy intake in adult populations.     

Persuasion and the law: A constitutional issue.

Presents an excerpt from a letter (used as Exhibit A in a case) written by the author in response to 2 attorneys' inquiry regarding the psychological evidence for the effectiveness of the order of persuasive arguments in changing opinions. An individual presenting an argument before and after an argument with an opposing viewpoint has the advantage of convincing people of the validity of his/her argument and the lack of validity of the opposing argument. (PsycINFO Database Record (c) 2010 APA, all rights reserved)