频谱分析仪现行检定规程与校准规范的对比研究

本文对比介绍了JJF1396-2013《频谱分析仪校准规范》与GJB/J 5859-2006《宽频带频谱分析仪检定规程》的检定校准项目、方法及相关要求,为频谱分析仪的检定校准工作开展提供参考借鉴。     

气相色谱仪新旧检定规程的解读

本文主要从规程适用范围、计量器具控制、计量性能要求及检定方法等方面入手,全面的解读了气相色谱仪新旧检定规程的差异,为仪器检定及期间核查提供了参考。     

液相色谱法测定水中苯丙[a]芘的不确定度评估

对液相色谱法测定生活饮用水中苯丙[a]芘含量测量不确定度进行分析,为评价检测数据的准确性提供科学依据。测样量为1m L时,测定生活饮用水中苯丙[a]芘含量为ρ=(0.856+0.025)μg·m L-1。通过对不确定度来源的量化分析,得出标准物质引入的不确定度分量和线性误差引入的不确定度分量是测定结果不确定度的重要来源。     

Mechanical Properties and Interlaminar Fracture Toughness of Glass‐Fiber‐Reinforced Epoxy Composites Embedded with Shape Memory Alloy Wires

The effects of the content and position of shape memory alloy (SMA) wires on the mechanical properties and interlaminar fracture toughness of glass‐fiber‐reinforced epoxy (GF/epoxy) composite laminates are investigated. For this purpose, varying numbers of SMA wires are embedded in GF/epoxy composite laminates in different stacking sequences. The specimens are prepared by vacuum‐assisted resin infusion (VARI) processing and are subjected to static tensile and three‐point‐bending tests. The results show that specimens with two SMA wires in the stacking sequence of [GF₂/SMA/GF₁/SMA/GF₂] and four SMA wires in the stacking sequence of [GF₄/SMA/GF₂/SMA/GF₄] exhibit optimal performance. The flexural strength of the optimal four‐SMA‐wire composite is lower than that of the pure GF/epoxy composite by 5.76% on average, and the flexural modulus is improved by 5.19%. Mode‐I and II interlaminar fracture toughness tests using the SMA/GF/epoxy composite laminates in the stacking sequence of [GF₄/SMA/GF₂/SMA/GF₄] are conducted to evaluate the mechanism responsible for decreasing the mechanical properties. Scanning electron microscopy (SEM) observations reveal that the main damage modes are matrix delamination, interfacial debonding, and fiber pullout.

     

Engineering High‐Performance MoO2‐Based Nanomaterials with Supercapacity and Superhydrophobicity by Tuning the Raw Materials Source

Herein, a simple self‐assembly method is proposed for the fabrication of MoO₂‐based superhydrophobic material with record high contact angles (contact angle up to about 173°) for conductive metal oxides on hard/soft substrates. The spin‐coated surface demonstrates excellent oil–water separation efficiency (>98%) after 50 cycles and robust corrosion resistance after immersion into different pH solutions for 20 d. These water‐resistant coatings retain excellent superhydrophobicity after oil immersion, knife‐scratch, and long‐cycle sandpaper abrasion, which is not observed on most artificial surfaces. Meanwhile, the functionality switching from superhydrophobicity to supercapacity, which have an inverse relationship in aqueous solutions because of poor electrode wettability, is achieved simply by editing the raw materials source. Tuning of the raw materials leads to the same product MoO₂/graphitic carbon with different morphologies and functionalities. Different from superhydrophobic MoO₂/carbon ball flowers, MoO₂ nanotubes with carbon exhibit excellent supercapacity with a large gravimetric capacitance and great cycling stability.     

Endoplasmic Reticulum–Targeted Fluorescent Nanodot with Large Stokes Shift for Vesicular Transport Monitoring and Long‐Term Bioimaging

Herein, a highly stable aggregation‐induced emission (AIE) fluorescent nanodot assembled by an amphiphilic quinoxalinone derivative‐peptide conjugate, namely Quino‐1‐Fmoc‐RACR (also termed as Q1‐PEP), which exhibits large Stokes shift and an endoplasmic reticulum (ER)‐targeting capacity for bioimaging is reported. It is found that the resulting nanodot can effectively enter the ER with high fluorescent emission. As the ER is mainly involved in the transport of synthesized proteins in vesicles to the Golgi or lysosomes, the Q1‐PEP nanodot with ER‐targeting capacity can be used to monitor vesicular transport inside the cells. Compared to conventional fluorescent dyes with small Stokes shifts, the self‐assembled fluorescent nanodot shows superior resistance to photobleaching and aggregation‐induced fluorescence quenching, and elimination of the spectra overlap with autofluorescence of biosubstrate owning to their AIE‐active and red fluorescence emission characteristics. All these optical properties make the fluorescent nanodot suitable for noninvasive and long‐term imaging both in vitro and in vivo.     

Modulating the Surface State of SiC to Control Carrier Transport in Graphene/SiC

Silicon carbide (SiC) with epitaxial graphene (EG/SiC) shows a great potential in the applications of electronic and photoelectric devices. The performance of devices is primarily dependent on the interfacial heterojunction between graphene and SiC. Here, the band structure of the EG/SiC heterojunction is experimentally investigated by Kelvin probe force microscopy. The dependence of the barrier height at the EG/SiC heterojunction to the initial surface state of SiC is revealed. Both the barrier height and band bending tendency of the heterojunction can be modulated by controlling the surface state of SiC, leading to the tuned carrier transport behavior at the EG/SiC interface. The barrier height at the EG/SiC(000‐1) interface is almost ten times that of the EG/SiC(0001) interface. As a result, the amount of carrier transport at the EG/SiC(000‐1) interface is about ten times that of the EG/SiC(0001) interface. These results offer insights into the carrier transport behavior at the EG/SiC heterojunction by controlling the initial surface state of SiC, and this strategy can be extended in all devices with graphene as the top layer.