A two-dimensional homogenized model for a pile of thin elastic sheets with frictional contact

The present paper deals with the computational simulation of a pile of thin sheets. The sheets are not laminated or glued, but they interact by frictional contact. In general, it is not possible to perform a full-scale finite element contact computation for piles containing thousands of sheets; the problem size becomes too large, and numerical solution methods suffer from severe convergence problems due to the large number of strongly coupled contact conditions. In this paper, a macroscopic material model is presented for the two-dimensional case. The pile of sheets is homogenized by introducing an effective anisotropic constitutive law, which is motivated by formulations of the theory of elasto-plasticity. This macroscopic material law models the behavior of a pile of sheets, allowing for no tensile stresses in the direction normal to the sheets and obeying Coulomb??s law of friction in the tangential contact plane. Applying this macroscopic material model, an equivalent homogeneous body can be treated using much coarser discretizations. Computational results for the problems are provided, and a comparison with simplified contact computations is done.     

Compression resistance and hysteresis of carbon fibre tows with grown carbon nanotubes/nanofibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. The issues for these materials related to manufacturing of these composites are, however, less investigated. Following the study of compressibility of woven carbon fibre preforms with CNT/CNFs grown on the fibres using the CVD method [Compos Sci Technol 2011; 71(3): 315-325], this paper describes compression tests on the carbon tows used in these fabrics. The results of the measurements include pressure vs. thickness diagrams in consecutive compression cycles and hysteresis of the compression. The results confirm a drastic change of compressibility of fibrous assemblies in the presence of CNT/CNF grafting.     

Hybrid passivated colloidal quantum dot solids

Colloidal quantum dot (CQD) films allow large-area solution processing and bandgap tuning through the quantum size effect. However, the high ratio of surface area to volume makes CQD films prone to high trap state densities if surfaces are imperfectly passivated, promoting recombination of charge carriers that is detrimental to device performance. Recent advances have replaced the long insulating ligands that enable colloidal stability following synthesis with shorter organic linkers or halide anions, leading to improved passivation and higher packing densities. Although this substitution has been performed using solid-state ligand exchange, a solution-based approach is preferable because it enables increased control over the balance of charges on the surface of the quantum dot, which is essential for eliminating midgap trap states. Furthermore, the solution-based approach leverages recent progress in metal:chalcogen chemistry in the liquid phase. Here, we quantify the density of midgap trap states in CQD solids and show that the performance of CQD-based photovoltaics is now limited by electron-hole recombination due to these states. Next, using density functional theory and optoelectronic device modelling, we show that to improve this performance it is essential to bind a suitable ligand to each potential trap site on the surface of the quantum dot. We then develop a robust hybrid passivation scheme that involves introducing halide anions during the end stages of the synthesis process, which can passivate trap sites that are inaccessible to much larger organic ligands. An organic crosslinking strategy is then used to form the film. Finally, we use our hybrid passivated CQD solid to fabricate a solar cell with a certified efficiency of 7.0%, which is a record for a CQD photovoltaic device.     

Folding at the Microscale: Enabling Multifunctional 3D Origami‐Architected Metamaterials

Mechanical metamaterials inspired by the Japanese art of paper folding have gained considerable attention because of their potential to yield deployable and highly tunable assemblies. The inherent foldability of origami structures enlarges the material design space with remarkable properties such as auxeticity and high deformation recoverability and deployability, the latter being key in applications where spatial constraints are pivotal. This work integrates the results of the design, 3D direct laser writing fabrication, and in situ scanning electron microscopic mechanical characterization of microscale origami metamaterials, based on the multimodal assembly of Miura‐Ori tubes. The origami‐architected metamaterials, achieved by means of microfabrication, display remarkable mechanical properties: stiffness and Poisson’s ratio tunable anisotropy, large degree of shape recoverability, multistability, and even reversible auxeticity whereby the metamaterial switches Poisson’s ratio sign during deformation. The findings here reported underscore the scalable and multifunctional nature of origami designs, and pave the way toward harnessing the power of origami engineering at small scales.     

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Growth of carbon nanotubes (CNT) or carbon nano-fibres (CNF) on carbon fibrous substrates is a way to increase the fracture toughness of fibre reinforced composites (FRC), with encouraging results reported in the recent years. If these nano-engineered FRC (nFRC) are destined to leave laboratories and enter industrial-scale production, a question of adapting the existing composite manufacturing methods will arise. The paper studies compressibility of woven carbon fibre performs (two types of fabrics) with CNT/CNF grown on the fibres using the CVD method. The results include pressure vs thickness and pressure vs fibre volume fraction diagrams for one and four layers of the fabric. Morphology of the nFRC is studied with SEM. It is shown that the pressure needed to achieve the target fibre volume fraction of the preform increases drastically (for example, from 0.05 MPa to more than 0.5 MPa for a fibre volume fraction of 52%) when CNT/CNF are grown on it. No change in nesting of the fabric plies is noticed. The poor compressibility can lower the achievable fibre volume fraction in composite for economical vacuum assisted light-RTM techniques and increase the pressure requirements in autoclave processing.     

Photo-thermo-refractive glass co-doped with Nd as a new laser medium

Photo-thermo-refractive (PTR) glass demonstrates refractive index change after exposure to UV radiation followed by a thermal treatment that enables recording of high efficiency holographic optical elements. This work demonstrates feasibility of function of this material as a complex optical medium which posseses both photosensitive and luminescent properties and paves a way for creation of monolythic solid state lasers where resonator components can be holographically recorded inside of a laser medium. It was found, that incorporating of Nd³⁺ ions in PTR glass does not affect photosensitivity required for hologram recording. It was demonstrated that emission wavelength, spectral width, and cross section of Nd³⁺ luminescence in PTR glass are typical for silicate laser glasses and Nd-doped PTR glass can be considered as a promising laser medium for monolithic solid state lasers.     

Power moves: Complementarity in dominant and submissive nonverbal behavior.

Two studies examine complementarity (vs. mimicry) of dominant and submissive nonverbal behaviors. In the first study, participants interacted with a confederate who displayed either dominance (through postural expansion) or submission (through postural constriction). On average, participants exposed to a dominant confederate decreased their postural stance, whereas participants exposed to a submissive confederate increased their stance. Further, participants with complementing responses (dominance in response to submission and submission in response to dominance) liked their partner more and were more comfortable than those who mimicked. In the second study, complementarity and mimicry were manipulated, and complementarity resulted in more liking and comfort than mimicry. The findings speak to the likelihood of hierarchical differentiation (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assimilation for Affiliation and Contrast for Control: Complementary Self-Construals.

People have knowledge about relationships (i.e., relational schemas) that is based on their experiences. Because most people have experience with complementary behavior (interaction partners behaving similarly in terms of affiliation but oppositely in terms of control), they expect complementary behavior in their relationships. Like other beliefs about relationships, expectations of complementarity affect self-construal. The authors provide evidence for complementary self-construal; people assimilate to relevant relationship partners on the affiliation dimension and contrast on the control dimension. Consistent with the proposed role of relationship knowledge in these effects, complementary self-construal was moderated by the familiarity of the target, whether people focused on their relationship with or the appearance of the target, and whether the context was relevant for the interpersonal dimension. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effectiveness of partner social support predicts enduring psychological distress after hematopoietic stem cell transplantation.

Objective: Hematopoietic stem cell transplant (HSCT) survivors who are 1 to 3 years posttransplant are challenged by the need to resume valued social roles and activities—a task that may be complicated by enduring transplant-related psychological distress common in this patient population. The present study investigated whether transplant survivors who receive adequate social support from their spouse or intimate partner experience lower distress. Method: Effects of receiving a greater quantity of partner support (a common approach to studying enacted support) were compared with effects of receiving more effective partner support (i.e., support that more closely matches their needs in terms of its quantity and quality). Men and women (N = 230) who were 1 to 3 years posttransplant completed measures of partner support quantity (Manne & Schnoll, 2001), partner social support effectiveness (Rini & Dunkel Schetter, 2010), and psychological distress (Brief Symptom Inventory; Derogatis & Spencer, 1982). Potential medical and sociodemographic confounds were controlled in analyses. Results: As hypothesized, survivors reported less distress when they received more effective partner support (p