Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying

Due to its high thermal stability and purely oxide ionic conductivity, yttria-stabilized zirconia (YSZ) is the most commonly used electrolyte material for solid oxide fuel cells (SOFCs). Standard electrolyte fabrication techniques for planar SOFCs involve wet ceramic techniques such as tape-casting or screen printing, requiring sintering steps at temperatures above 1300 °C. Plasma spraying (PS) may provide a more rapid and cost efficient method to produce SOFCs without sintering. High-temperature sintering requires long processing times and can lead to oxidation of metal alloys used as mechanical supports, or to detrimental interreactions between the electrolyte and adjacent electrode layers. This study investigates the use of spin coated sol gel derived YSZ precursor solutions to fill the pores present in plasma sprayed YSZ layers, and to enhance the surface area for reaction at the electrolyte-cathode interface, without the use of high-temperature firing steps. The effects of different plasma conditions and sol concentrations and solid loadings on the gas permeability and fuel cell performance have been investigated.     

Mechanical,Thermal and Electrical Resisitivity Properties of Thermoplastic Composites Filled with Carbon Fibers and Carbon Particles

Composites consisting of carbon fibers (CF) and carbon particles (CP) in polypropylene (PP) matrix were melt-compounded. Composites were analyzed for their mechanical, electrical and thermal properties. Results indicate that the addition of these fillers improved the mechanical properties of the composites. Thermal conductivity was enhanced as the concentration of fillers was increased. Carbon fibers render the composites electrically conductive so we observed a percolation threshold near 10 wt.% of CF for PP/CF (PP and CF composite) and near 25 wt.% of CP for PP/CP (PP and carbon particle composite). All the results indicated that carbon fibers are more effective in improving the properties as compare to the carbon particles.     

Triglyceride selectivity of immobilized <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis> lipase in interesterification

The triglyceride (fatty acid) selectivity of an immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) was investigated in lipase-catalyzed interesterification reactions between two nono-acid TG in n-hexane. Tristearin (tri-C18∶0) was used as a reference in a series of TG with saturated FA from tri-C4∶0 to tri-C20∶0, except for tri-C6∶0, and in a series of unsaturated FA from tri-C18∶1 to tri-C18∶3. The quantification was performed by HPLC, and different methods of selectivity evaluation were used. None of the methods used showed any significant differences between the performances of the lipase on the different TG, indicating that Lipozyme TL IM is nonselective toward FA or TG in the system used. A response surface design was used to investigate the influence of water activities (a _w ) and reaction temperatures on the reactivity of Lipozyme TL IM with a system of tripalmitin (tri-C16∶0) and trilaurin (tri-C12∶0) in n-hexane. An increase in temperature (40 to 60°C) was found to affect the reactivity of the lipase significantly. The reactivity of Lipozyme TL IM was unaffected by the change in a _w from 0.1130 to 0.5289. An increase in a _w only led to an increase in FFA formation.     

On the issue of limiting nutrient and predictions of cyanobacteria in aquatic systems

This study aims at bridging the gap between freshwater and marine eutrophication studies by presenting (1) a cross-system analysis of the relationship between chlorophyll and the total nitrogen (TN) to total phosphorus (TP) ratio (2) a general model to predict concentrations of cyanobacteria from data on TP, the TN/TP ratio, salinity and temperature, and (3) a general trophic level classification for aquatic systems based on chlorophyll classes (for oligo-, meso-, eu- and hypertrophic systems). The data compiled in this study concerns more than 500 lakes and coastal areas covering a very wide domain in terms of nutrient concentrations and salinity. There was no simple relationship between the TN/TP ratio and empirical chlorophyll concentrations or concentrations of cyanobacteria. Variations in TP rather than TN generally seem to be more important to predict variations among systems in chlorophyll-a and cyanobacteria. Different "bioavailable" forms of the nutrients (DIN, DIP, phosphate, nitrate, etc.) have been shown to have very high coefficients of variation (CV), which means that many samples are needed to obtain reliable empirical data which are necessary in models aiming for high predictive power and practical usefulness.     

Fish mercury development in relation to abiotic characteristics and carbon sources in a six-year-old, Brazilian reservoir

Time series on fish mercury (Hg) development are rare for hydroelectric reservoirs in the tropics. In the central-western part of Brazil, a hydroelectric reservoir, called Lago Manso, was completed in 1999 after that background levels of fish Hg concentrations had been determined. The development for the first 3 years was studied in 2002. The objective of the present study was to determine development of fish Hg concentrations for a second three-year period after flooding. The bioaccumulation factor and certain abiotic and biotic factors, possibly affecting the availability and accumulation of Hg, were also examined. The results show that Hg levels in fish from Lago Manso have increased more than five times compared to the background levels observed before construction of the reservoir. At the same time, dissolved organic carbon has increased while dissolved oxygen has decreased indicating enhanced bioavailability of Hg. In the reservoir, Salminus brasiliensis had in average a Hg content of 1.1 microg g(-1) f.w., Pseudoplatystoma fasciatum 1.2, Serrasalmus marginatus/spilopleura 0.9, and Brycon hilarii 0.6 microg g(-1) f.w. The average fish Hg contents were higher downstream, except for B. hilarii. In the reservoir, the average Hg content of each species was in 2005 always over the consumption limit (0.55 microg total Hg g(-1) f.w.) recommended by WHO. Therefore, the people living around Lago Manso should be informed of the health effects of Hg, and fish consumption recommendations should be carried out. The accumulation of Hg varies widely between species as shown by the bioaccumulation factor which ranges between 5.08 and 5.59 log units. The observed variation is explained by differences in diet and trophic position with piscivorous fish exhibiting the highest mean Hg concentration, followed by carnivorous and omnivorous species. Carbon isotope analyses imply that trophic position is not the only cause of the observed differences in Hg levels between omnivorous B. hilarii, having a diet partly based on C(4) plants, and carnivorous S. marginatus as well as piscivorous S. brasiliensis, whose carbon sources are depleted in (13)C. The fact that the species have different carbon sources indicates that they belong to different food chains.     

Simulating the effects of climate change,economic and urban planning scenarios on urban runoff patterns of a metropolitan region

Urban development and climate change are expected to have significant effects on urban stormwater runoff. In this study, the Dynamic Urban Water Simulation Model (DUWSiM) is applied to Dublin, Ireland, to explore urban runoff patterns under varying urban growth and climate scenarios. Results show that annual urban runoff could decrease by 3.0% from climate change and monthly runoff could increase by 30% in winter and decrease by 28% in summer. Results also indicate that urban growth could increase annual runoff by up to 15%. The combined effect of climatic and land-use change generated runoff may potentially increase annual totals from between 2.9% to 21%. Monthly changes in runoff totals could increase by up to 57%. Accommodating these variations in runoff between the scenarios, flexible decentralised systems such as green roofs and pervious pavements, have a vital role in increasing the adaptability and long term sustainability of water infrastructure.     

Air entrapment in sheet molding compounds (SMC)

Entrapped air can commonly lead to large delaminations in thick walled sheet molding compound (SMC) products. In this work different sources of air entrapment in SMC are investigated. The critical process is shown to be the impregnation of the fibers. If no surface active additives are used, large volumes of air may be entrapped in this process, unless the viscosity of the compound is very low. In this situation of poor wetting, the viscosity of the compound during fiber impregnation will critically determine the interlaminar, tensile strength of the product. However, if surface active additives are used, the air escapes entrapment even at relatively high viscosities. The lowering of the viscosity, which is a side effect of the additives, has practically no importance under these conditions of good wetting. Large numbers of small air bubbles are also entrapped during the mixing of the components, but it is shown that these bubbles have very little effect on the mechanical properties of the finished part.     

Chronic obstructive pulmonary disease in patients with end‐stage kidney disease on hemodialysis

The objectives of this study were to assess the prevalence of chronic obstructive pulmonary disease (COPD) in hemodialysis patients with spirometry and to examine the effects of fluid removal by hemodialysis on lung volumes. Patients ≥18 years at two Danish hemodialysis centers were included. Forced expiratory volume in one second (FEV₁), forced vital capacity (FVC), and FEV₁/FVC ratio were measured with spirometry before and after hemodialysis. The diagnosis of COPD was based on both the GOLD criteria and the lower limit of normal criteria. There were 372 patients in treatment at the two centers, 255 patients (69%) completed spirometry before dialysis and 242 of these (65%) repeated the test after. In the initial test, 117 subjects (46%) had airflow limitation indicative of COPD with GOLD criteria and 103 subjects (40.4%) with lower limit of normal criteria; COPD was previously diagnosed in 24 patients (9%). Mean FVC and FEV₁ decreased mildly after dialysis (FVC: 2.84 to 2.79 L, P < 0.01. FEV₁: 1.97 to 1.93 L, P < 0.01) Hemodialysis did not affect the FEV₁/FVC ratio or number of subjects with airflow limitation indicative of COPD (113 vs. 120, P = 0.324; n = 242). COPD is a frequent and underdiagnosed comorbidity in patients on chronic hemodialysis. Spirometry should be considered in all patients on dialysis in order to address dyspnea adequately. Hemodialysis induced a small fall in mean FEV₁ and FVC, which was more pronounced in patients with little or no fluid removal, but the FEV₁/FVC ratio and the number of subjects with airflow limitation indicative of COPD were not affected by dialysis.     

Algorithm based decision support system for the concerted selection of equipment in machining/assembly cells

Equipment selection plays a major role in the performance of machining/assembly cells. Based on analytical algorithms, a decision support system (DSS) is developed to select machining centres and robots concurrently from the milieu available in the marketplace. The DSS evaluates the design and geometry of the mating parts that are to be processed and assembled by the cell. Accordingly, it recommends the machining centre and robot that maximize the cell's performance subject to various operational and budget constraints.