Precisely Controlled Microsphere Design via Visible‐Light Cross‐Linking of Functional Prepolymers

A new strategy for particle synthesis is enabled by utilizing modern synthetic, polymer, and photochemical techniques to facilitate the synthesis of highly narrow–disperse multifunctional microspheres from visible‐light induced crosslinking of prepolymers in both a single and dual polymer system. The approach requires no stabilizers, bases, or initiators, and proceeds at ambient temperature to yield microspheres with a tunable size range (0.25–5 µm) in less than 4 h, depending largely on solvent composition, but also polymer concentration (2–10 mg mL^?1), ratio, and irradiation intensity (3–20 W). Critically, the visible‐light induced dimerization reaction exploited herein enables simple functional particle syntheses via a single polymer system. Underpinned by an in‐depth kinetic analysis of the particle formation as well as a detailed small molecule study, the mechanism for particle formation is also elucidated. Importantly, inherent advantages of the system are exploited for surface functionalization of residual acrylate and hydroxyl groups (generating inherently fluorescent particles).     

Ultrasensitive Strain Gauges Enabled by Graphene‐Stabilized Silicone Emulsions

Here, an approach is presented to incorporate graphene nanosheets into a silicone rubber matrix via solid stabilization of oil‐in‐water emulsions. These emulsions can be cured into discrete, graphene‐coated silicone balls or continuous, elastomeric films by controlling the degree of coalescence. The electromechanical properties of the resulting composites as a function of interdiffusion time and graphene loading level are characterized. With conductivities approaching 1 S m^?1, elongation to break up to 160%, and a gauge factor of ≈20 in the low‐strain linear regime, small strains such as pulse can be accurately measured. At higher strains, the electromechanical response exhibits a robust exponential dependence, allowing accurate readout for higher strain movements such as chest motion and joint bending. The exponential gauge factor is found to be ≈20, independent of loading level and valid up to 80% strain; this consistent performance is due to the emulsion‐templated microstructure of the composites. The robust behavior may facilitate high‐strain sensing in the nonlinear regime using nanocomposites, where relative resistance change values in excess of 10⁷ enable highly accurate bodily motion monitoring.     

Progress in multimodality imaging: truly simultaneous ultrasound and magnetic resonance imaging

Multimodality medical imaging takes advantage of the strengths of different imaging modalities to provide a more complete picture of the anatomy under investigation. Many complementary modalities have been combined to form such systems and some are gaining use clinically. One combination that has not been developed, in large part due to technical difficulties, is a combined magnetic resonance (MR) and ultrasound (US) imaging system. Such a system offers the potential to combine the strengths of these modalities in a wide range of diagnostic and therapeutic applications. The goal of this study was to evaluate the feasibility of performing simultaneous multimodality US and MR imaging. An US imaging system capable of operation in a clinical MR imager was developed, and methods to perform simultaneous imaging were investigated. Simultaneous imaging was feasible without any mutual interference by either filtering the transmitted and received US signal, or by synchronizing data acquisition between the two imaging systems. Spatial registration between the two modalities was achieved by using a reference phantom with implanted glass beads in orthogonal planes. Excellent agreement was observed between spatial measurements of an object made with both modalities, and the feasibility of using this system in vivo was demonstrated in a rabbit model. Simultaneous US and MR imaging is achievable, and can provide complementary information about an object under investigation. This demonstration of technical feasibility and the development of a prototype system open up the potential to investigate the promising clinical applications of this combined technology.     

缺陷问题驱动浸没光刻技术发展

涂层的应用导致晶圆上缺陷的增加或者使光刻表现发生变化虽然现在推测浸没光刻技术的量产时间还太早,但是许多公司正在努力确定生产线何时能从干法工艺跃为湿法工艺。根据最近在San Jose举办的     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

Predictive Validity of an Empirical Approach for Selecting Promising Message Topics: A Randomized‐Controlled Study

Several message topic selection approaches propose that messages based on beliefs pretested and found to be more strongly associated with intentions will be more effective in changing population intentions and behaviors when used in a campaign. This study aimed to validate the underlying causal assumption of these approaches which rely on cross‐sectional belief–intention associations. We experimentally tested whether messages addressing promising themes as identified by the above criterion were more persuasive than messages addressing less promising themes. Contrary to expectations, all messages increased intentions. Interestingly, mediation analyses showed that while messages deemed promising affected intentions through changes in targeted promising beliefs, messages deemed less promising also achieved persuasion by influencing nontargeted promising beliefs. Implications for message topic selection are discussed.     

Conductive Anodic Filament Formation Part II: Electrochemical Reactions Leading to CAF

Conductive anodic filament (CAF) formation has been studied for a number of years, but the mechanism of its formation has not previously been defined. In 2002, Ready identified CAF as atacamite, Cu₂(OH)₃Cl. Electrochemical studies have shown that both CuCl and CuCl ₂ ^? participate in the formation of Cu₂(OH)₃Cl, with the predominating species being CuCl. This paper proposes a mechanism for CAF formation based on x-ray photoelectron spectroscopy. The data show that CuCl is the precursor to the formation of Cu₂(OH)₃Cl in the presence of oxygen and water. Earlier, Meeker and Lu Valle had proposed that CAF failure is best represented by two competing reactions: the formation of a copper chloride corrosion compound (now identified as Cu₂(OH)₃Cl) and the formation of innocuous trapped chlorine compounds. Since no evidence of any trapped chloride compounds has been found, we propose that the formation of CAF is best represented by a single nonreversible reaction.     

Understanding Sexual Objectification: A Comprehensive Approach Toward Media Exposure and Girls' Internalization of Beauty Ideals,Self‐Objectification,and Body Surveillance

The relationship between exposure to sexually objectifying music television, primetime television programs, fashion magazines, and social networking sites and the internalization of beauty ideals, self‐objectification, and body surveillance was examined among adolescent girls (N = 558). A structural equation model showed direct relationships between sexually objectifying media and the internalization of beauty ideals, and indirect relationships between sexually objectifying media and self‐objectification, and body surveillance through the internalization of beauty ideals. The direct relationships between sexually objectifying media and the internalization of beauty ideals, self‐objectification, and body surveillance differed across the types of sexually objectifying media. The discussion focuses on the implications of these findings to explain self‐objectification among girls.     

Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enables Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects

Biomaterials research usually focuses on functional and structural mimicry of the extracellular matrix or tissue hierarchy and morphology. Most recently, material‐induced modulatory effects on the immune system to arouse a healing response is another upcoming strategy. Approaches, however, that integrate both aspects to induce healing and facilitate specific cell adhesion are so far little explored. This study exploits manifold but chemical crosslinker free functionalization of hydrophilic and nonadhesive electrospun fiber surfaces with peptides for controlled cell adhesion, and with neutra­lizing antibodies targeting the master cytokine tumor necrosis factor (TNF) to dampen proinflammatory reactions by the fiber adherent cells. It is demonstrated that cell attachment and immunomodulatory properties of a textile can be tailored at the same time to generate meshes that combine immunosuppressive activity with specific cell adhesion properties.