Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

The hygienic working practices of maintenance personnel and equipment hygiene in the Finnish food industry

The hygienic working practices of the maintenance personnel as well as the hygiene of the equipment in the food industry were investigated with questionnaires and microbial surveys. The protective clothing, washing of hands and tools as well as avoiding foreign bodies left on the production lines should be targeted when the hygienic working practices are developed for maintenance personnel. Based on the questionnaire to food processors, packaging machines, conveyers, dispensers, slicing and cooling machines were considered the most problematic pieces of equipment hygienically mainly because of poor hygienic design. In order to improve food safety, both the training of maintenance personnel in food hygiene and equipment design should be more emphasised.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.     

FEM model of the ohmic resistance of IP-SOFCs

In the present work, the ohmic resistance of an integrated planar-SOFC (IP-SOFC) has been evaluated by developing a model whose equations have been solved numerically through an FEM method. The model allows to estimate the distribution of voltage and current density in the cell. A comparison between simulated and experimental data of area specific resistance is reported, which shows satisfactory agreement. The mathematical model has also been used to carry out some parametric studies for optimisation purposes. Indeed, a reduction in cell pitch length and an increase in electrode thickness are predicted to lead to a reduction in ohmic losses in IP-SOFCs.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

Thermal Conductivity/Diffusivity of Silicon Carbide Whisker Reinforced Mullite

The thermal conductivity and diffusivity of silicon carbide whisker reinforced mullite was shown to increase with whisker content. This effect was much greater for vapor-liquid-solid (VLS) whiskers than for rice-hull (RH) whiskers. This suggests that the thermal conductivity for the VLS whiskers was significantly higher than for the RH whiskers. Due to preferred orientation of the whiskers, thermal conductivity and diffusivity of the composite samples exhibited significant anisotropy.     

Hardness of preorder checking for basic formalisms

We investigate the complexity of preorder checking when the specification is a flat finite-state system whereas the implementation is either a non-flat finite-state system or a standard timed automaton. In both cases, we show that simulation checking is Exptime-hard, and for the case of a non-flat implementation, the result holds even if there is no synchronization between the parallel components and their alphabets of actions are pairwise disjoint. Moreover, we show that the considered problems become Pspace-complete when the specification is assumed to be deterministic. Additionally, we establish that comparing a synchronous non-flat system with no hiding and a flat system is Pspace-hard for any relation between trace containment and bisimulation equivalence, even if the flat system is assumed to be fixed.     

Audience-induced inhibition of overt practice during learning.

Three experiments with 204 undergraduates examined the hypothesis that an audience can inhibit overt practice and thereby impair learning of unfamiliar words and enhance learning of familiar words. This hypothesis was derived from an analysis of motoric and symbolic mediation during learning. In comparison with learning while alone, the results show that the audience inhibited overt practice of unfamiliar and familiar words and that reduced practice was detrimental to learning unfamiliar words. Inhibition of overt practice with an audience enhanced learning of familiar words in only 1 of the experiments. Instructions to practice overtly reduced the audience-inhibition effect in learning unfamiliar words. The studies are discussed in the context of drive-theory explanations for social facilitation effects in learning. (20 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Towards 3D Bioprinted Spinal Cord Organoids

Three-dimensional (3D) cultures, so-called organoids, have emerged as an attractive tool for disease modeling and therapeutic innovations. Here, we aim to determine if boundary cap neural crest stem cells (BC) can survive and differentiate in gelatin-based 3D bioprinted bioink scaffolds in order to establish an enabling technology for the fabrication of spinal cord organoids on a chip. BC previously demonstrated the ability to support survival and differentiation of co-implanted or co-cultured cells and supported motor neuron survival in excitotoxically challenged spinal cord slice cultures. We tested different combinations of bioink and cross-linked material, analyzed the survival of BC on the surface and inside the scaffolds, and then tested if human iPSC-derived neural cells (motor neuron precursors and astrocytes) can be printed with the same protocol, which was developed for BC. We showed that this protocol is applicable for human cells. Neural differentiation was more prominent in the peripheral compared to central parts of the printed construct, presumably because of easier access to differentiation-promoting factors in the medium. These findings show that the gelatin-based and enzymatically cross-linked hydrogel is a suitable bioink for building a multicellular, bioprinted spinal cord organoid, but that further measures are still required to achieve uniform neural differentiation.