Influence of disordering by low-temperature neutron irradiation on the superconducting transition temperature of Nb3Sn

The superconducting transition temperatureT _c of a Nb₃Sn diffusion wire has been studied as a function of low-temperature neutron irradiation (T=10 K).T _c is observed to be essentially constant until the fast neutron dose t (for neutron energiesE>0.1 MeV) exceeds a value of 10¹⁸ n/cm²; after this valueT _c decreases linearly with t up to the maximum applied dose of 1.05×10¹⁹ n/cm². Comparison with theory and other experimental data indicates that radiation-induced disorder is the primary mechanism for the observedT _c changes.Work supported by the Bundesministerium für Forschung und Technologie and by the Deutsche Forschungsgemeinschaft.     

Coordination in networks: An economic equilibrium analysis

Networks utilizing modern communication technologies can offer competitive advantages to those using them wisely. But due to the existence of network effects, planning and operating cooperation networks is difficult. In this paper, the strategic situation of individual agents deciding on network participation is analysed. A systematic equilibrium analysis using computer-based simulations reveals principal solution scenarios for network agents and shows that network cooperation problems might frequently be not as difficult to resolve as often feared. In particular, strategic situations are identified showing that a majority of individuals might be better off getting the optimal solution from a central principal and that in many cases simple information intermediation can solve the start-up problem notorious in network economics.     

High Order Finite Difference Approximations of Electromagnetic Wave Propagation Close to Material Discontinuities

Electromagnetic wave propagation close to a material discontinuity is simulated by using summation by part operators of second, fourth and sixth order accuracy. The interface conditions at the discontinuity are imposed by the simultaneous approximation term procedure. Stability is shown and the order of accuracy is verified numerically.     

Memory Management for Real-Time Java: An Efficient Solution using Hardware Support*

This paper addresses the issue of improving the performance of memory management for real-time Java applications, building upon the real-time specification for Java (RTSJ) from the Real-Time Java Expert Group. In a first step, a collecting dynamic memory solution including both a real-time garbage collector and region-based memory management, is proposed. A thorough analysis of the parameters influencing the performance of write barriers in memory management, together with ways of improvement are then presented. Finally, the implementation of a memory management solution compliant with the RTSJ and integrating the proposed improvements is sketched.     

Thermophysical Properties of Binary Mixtures of R125 + R143a in Comparison with a Simple Prediction Method

The thermal diffusivity and sound speed of binary refrigerant mixtures of R143a (1,1,1-trifluoroethane) and R125 (pentafluoroethane) have been determined for both the saturated liquid and vapor phase using dynamic light scattering (DLS). Measurements were performed for four quite different mixture compositions over a wide temperature range from 293 to 345 K approaching the vapor-liquid critical point. The results obtained corroborate the usefulness of a simple prediction method for the determination of different thermophysical properties of multicomponent mixtures in the two-phase region up to the critical point. Besides the information on the properties for the pure components, the successful application of the prediction method is also based on an exact knowledge of the critical temperature. The composition dependence of the critical temperature has been determined by observation of the vanishing meniscus between liquid and vapor phases. The mixture results are discussed in detail and compared with available literature data.     

Identification and Validation of a Discrete Element Model for Concrete

The use of a three-dimensional discrete element method (DEM) is proposed to study concrete structures submitted to dynamic loading. The aim of this paper is to validate the model first in the quasistatic domain, and second in dynamic compression, at the sample scale. A particular growing technique is used to set a densely packed assembly of arbitrarily sized spherical particles interacting together, representing concrete. An important difference from classical DEMs where only contact interactions are considered, is the use of an interaction range. First, the correct identification of parameters of the DEM model to simulate elastic and nonlinear deformation including damage and rupture is made through quasistatic uniaxial compression and tension tests. The influence of the packing is shown. The model produces a quantitative match of strength and deformation characteristics of concrete in terms of Young’s modulus, Poisson’s coefficient, and compressive and tensile strengths. Then, its validity is extended through dynamic tests. The simulations exhibit complex macroscopic behaviors of concrete, such as strain softening, fractures that arise from extensive microcracking throughout the assembly, and strain rate dependency.     

Automatic data collection for enterprise architecture models

Enterprise Architecture (EA) is an approach used to provide decision support based on organization-wide models. The creation of such models is, however, cumbersome as multiple aspects of an organization need to be considered, making manual efforts time-consuming, and error prone. Thus, the EA approach would be significantly more promising if the data used when creating the models could be collected automatically—a topic not yet properly addressed by either academia or industry. This paper proposes network scanning for automatic data collection and uses an existing software tool for generating EA models (ArchiMate is employed as an example) based on the IT infrastructure of enterprises. While some manual effort is required to make the models fully useful to many practical scenarios (e.g., to detail the actual services provided by IT components), empirical results show that the methodology is accurate and (in its default state) require little effort to carry out.     

Dielectrophoresis‐Assisted Integration of 1024 Carbon Nanotube Sensors into a CMOS Microsystem

Carbon‐nanotube (CNT)‐based sensors offer the potential to detect single‐molecule events and picomolar analyte concentrations. An important step toward applications of such nanosensors is their integration in large arrays. The availability of large arrays would enable multiplexed and parallel sensing, and the simultaneously obtained sensor signals would facilitate statistical analysis. A reliable method to fabricate an array of 1024 CNT‐based sensors on a fully processed complementary‐metal‐oxide‐semiconductor microsystem is presented. A high‐yield process for the deposition of CNTs from a suspension by means of liquid‐coupled floating‐electrode dielectrophoresis (DEP), which yielded 80% of the sensor devices featuring between one and five CNTs, is developed. The mechanism of floating‐electrode DEP on full arrays and individual devices to understand its self‐limiting behavior is studied. The resistance distributions across the array of CNT devices with respect to different DEP parameters are characterized. The CNT devices are then operated as liquid‐gated CNT field‐effect‐transistors (LG‐CNTFET) in liquid environment. Current dependency to the gate voltage of up to two orders of magnitude is recorded. Finally, the sensors are validated by studying the pH dependency of the LG‐CNTFET conductance and it is demonstrated that 73% of the CNT sensors of a given microsystem show a resistance decrease upon increasing the pH value.     

Consensus reaching in multi-agent packet-switched networks with non-linear coupling

An important task for multi-agent systems (MAS) is to reach a consensus, e.g. to align their velocity vectors. Recent results propose appropriate consensus protocols to achieve such tasks, but most of them do not consider the effect of communication constraints such as the presence of time-delays in the exchange of information between the agents. In this article, we provide conditions for a non-linear, locally passive MAS of arbitrary size to reach a consensus, when the agents communicate over a packet-switched network that is characterised by a given topology. Both the cases of constant and switching topologies are considered. The nature of the communication channel imposes constraints that are modelled using stochastic delays of arbitrary distribution. We first embed this model in another, distributed but deterministic delay model and provide conditions for the error introduced by this simplification. In our main result, we provide conditions for the locally passive MAS with distributed delays to reach a consensus. In the case of a fixed topology, the underlying directed graph has to contain a spanning tree. In the case of a switching topology, only the union graph of all graphs that persist over time is required to contain a spanning tree. These conditions are independent of the distribution and the size of the packet delays. To show attractivity of the consensus set, we use an invariance principle for systems described by functional differential equations based on an appropriate Lyapunov–Razumikhin function. This methodological approach is the main contribution of this work and can also be applied to other consensus problems with delays. We illustrate our results by numerical simulations showing synchronisation of non-linear Kuramoto oscillators over a digital network.     

Schrifttumsberichte

Ohne Zusammenfassung