Precise measurements of the total concentration of atmospheric CO2 and 13CO2/12CO2 isotopic ratio using a lead-salt laser diode spectrometer

We have developed a tunable diode laser spectrometer, called SIMCO (spectrometer for isotopic measurements of CO(2)), for determining the concentrations of (12)CO(2) and (13)CO(2) in atmospheric air, from which the total concentration of CO(2) and the isotopic composition (expressed in delta units) delta(13)CO(2) are calculated. The two concentrations are measured using a pair of lines around 2290.1 cm(-1), by fitting a line profile model, taking into account the confinement narrowing effect to achieve a better accuracy. Using the Allan variance, we have demonstrated (for an integration time of 25 s) a precision of 0.1 ppmv for the total CO(2) concentration and of 0.3[per thousand] for delta(13)CO(2). The performances on atmospheric air have been tested during a 3 days campaign by comparing the SIMCO instrument with a gas chromatograph (GC) for the measurement of the total CO(2) concentration and with an isotopic ratio mass spectrometer (MS) for the isotopic composition. The CO(2) concentration measurements of SIMCO are in very good agreement with the GC data with a mean difference of Delta(CO(2))=0.16+/-1.20 ppmv for a comparison period of 45 h and the linearity of the concentration between the two instruments is also very good (slope of correlation: 0.9996+/-0.0003) over the range between 380 and 415 ppmv. For delta(13)CO(2), the comparison with the MS data shows a larger mean difference of Delta(delta(13)CO(2))=(-1.9+/-1.2)[per thousand], which could be partly related to small residual fluctuations of the overall SIMCO instrument response.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

A new test for cleaning efficiency assessment of cleaners for hard surfaces

A new test was developed to assess the efficiency of no-wiping hard-surface cleaning. The test allows cleaner comparisons according to their ability to remove greasy soils. The chosen approach minimizes the mechanical forces applied while cleaning so that the interactions between a detergent solution and the soil to be removed can be characterized. For this, immersion cleaning was chosen, with coated stainless steel as substrate and pigmented oils as the model soil. Several parameters were studied in defined ranges using the Experimental Design method and systematic comparisons. The test shows high reliability on degreasing assessments and is there-fore especially suited to optimization of nonionic surfactant mixes. The originality of the test lies in the possibility of keeping a visual trace of the cleaned substrate appearance by imprinting it on a piece of paper. The validation of the test leads to corroboration of several practical observations. Temperature and agitation play a major role in cleaning efficiency. Detergent solution concentration is a more relevant parameter than pH. Sodium carbonate is shown to have a higher buffering effect than pentahydrated sodium metasilicate. The test is easy to set up, highly sensitive, and can be adapted to solve the problems encountered by formulators of detergent cleaners, such as screening the best ethoxylated fatty alcohol mix for better degreasing properties.     

Direct-writing of PbS nanoparticles inside transparent porous silica monoliths using pulsed femtosecond laser irradiation

Pulsed femtosecond laser irradiation at low repetition rate, without any annealing, has been used to localize the growth of PbS nanoparticles, for the first time, inside a transparent porous silica matrix prepared by a sol-gel route. Before the irradiation, the porous silica host has been soaked within a solution containing PbS precursors. The effect of the incident laser power on the particle size was studied. X-ray diffraction was used to identify the PbS crystallites inside the irradiated areas and to estimate the average particle size. The localized laser irradiation led to PbS crystallite size ranging between 4 and 8 nm, depending on the incident femtosecond laser power. The optical properties of the obtained PbS-silica nanocomposites have been investigated using absorption and photoluminescence spectroscopies. Finally, the stability of PbS nanoparticles embedded inside the host matrices has been followed as a function of time, and it has been shown that this stability depends on the nanoparticle mean size.     

Efficient Immobilization of Yeast Transketolase on Layered Double Hydroxides and Application for Ketose Synthesis

Transketolase (TK) from S. cerevisiae was successfully immobilized on layered double hydroxides (LDH) using simple, affordable and efficient adsorption and coprecipitation based immobilization procedures. Optimization of the preparation was performed using zinc aluminium nitrate (Zn₂Al‐NO₃) and magnesium aluminium nitrate (Mg₂Al‐NO₃) LDH as immobilization supports, and the protein‐to‐LDH weight ratio (Q) was varied. The highest immobilization yields (98–99%) and highest relative specific activities (4.2–4.4 U⋅mg⁻¹ for the immobilized enzyme compared to 4.5 U⋅mg⁻¹ for the free enzyme) were both achieved when using a protein‐to‐LDH weight ratio (Q) of 0.38. Efficient lyophilization of the LDH‐TK bionanocomposites thus synthesized was proven to allow easy use and storage of the supported TK with no significant loss of activity over a three‐month period. The kinetic parameters of the LDH‐TK enzyme were comparable to those of the free TK. The LDH‐TK enzyme was finally tested for the synthesis of L ‐erythrulose starting from hydroxypyruvate lithium salt (Li‐HPA) and glycolaldehyde (GA) as substrates. L ‐erythrulose was characterized and obtained with an isolated yield of 56% similar to that obtained with free TK. The reusability of the LDH‐TK biohybrid material was then investigated, and we found no loss of enzymatic activity over six cycles.     

Plant Chemical Defense Induced by a Seed-Eating Pollinator Mutualist

Plant-seed parasite pollination mutualisms involve a specific pollinator whose larvae develop by consuming a fraction of the host plant seeds. These mutualisms are stable only if the plant can control seed destruction by the larvae. Here, we studied the chemical response of the European globeflower Trollius europaeus to infestation by an increasing number of Chiastocheta fly larvae. We used liquid chromatographic analysis to compare the content of phenolic compounds in unparasitized and parasitized fruits collected in two natural populations of the French Alps, and mass spectrometry and nuclear magnetic resonance to elucidate the structure of adonivernith, a C-glycosyl-flavone. This compound is present in many of the organs of T. europaeus, but not found in other Trollius species. Furthermore, it is overproduced in the carpel walls of parasitized fruits, and this induced response to infestation by fly larvae is density-dependent (increases with larval number), and site-dependent (more pronounced in the high-altitude site). Mechanical damage did not induce adonivernith production. This tissue-specific and density-dependent response of T. europaeus to infestation by Chiastocheta larvae might be an efficient regulation mechanism of seed-predator mutualist population growth if it decreases survival or growth of the larvae.     

The Effect of Pore Morphology on Hot Spot Temperature

Composite explosives contain pores that collapse under shock wave interaction generating localized regions of heat known to be important in the initiation of high explosives. Understanding pore collapse under shock loading is essential to create predictive reactive flow models to simulate the initiation process. While spherical pore collapse has been thoroughly simulated, other geometries have been relatively neglected. Simulating microoscale hot spot nucleation, we analyze the effect of pore morphology on the post‐shock hot spot temperature. Several pore morphologies that yield higher temperatures than the spherical case are revealed and discussed. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE‐AC52‐07NA27344.     

Microporous network‐assisted formation of copper‐in‐polymer gradient composite film

In this article, a copper‐in‐polymer‐gradient composite film (CPGCF) was synthesized by electrochemical strategy via reducing a solvent‐swollen cathode film (SCF). The latex nanoparticles of a ternary copolymer including styrene, butyl acrylate, and acrylic acid structural units play the key role to form well‐graded copper distribution in this ternary copolymer matrix through the porous morphological structure developed by latex nanoparticle semimelt joining. The morphological structure along cross‐section of CPGCF includes three layers: (1) a dense copper layer in ternary copolymer matrix whose most outside was originally attached to cathode in electrochemical reactor, (2) a shrublike layer that grew from dense copper layer, and (3) a clear layer in which there is no obvious reduced copper phase whose most outside was originally contacted with liquid electrolyte medium in electrochemical reactor. As experimental aspects, the influences of emulsion polymerization conditions of ternary copolymer, predrying time and temperature of SCF, dc voltage in electrochemical reduction on CPGCF structure were investigated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Calorimetric study of fluorinated methacrylic and vinyl polymer blends: part 2: correlation between miscibility, chemical structure and χ12 interaction parameter in binary systems

The miscibility of poly(methylmethacrylate) (PMMA) and (trifluoroethyl methacrylic ester-MMA) copolymers (MMA-MATRIFE) with poly(vinylidene fluoride) (PVDF) and VDF copolymers was studied by differential scanning calorimetry (DSC) as a function of the fluorinated copolymer crystallinity and fluoroalkyl methacrylic ester content in the methacrylic copolymer. Miscibility limits were found identical whatever be the blend preparation technique, although solution mixing induced some polymer fractionation, thus giving slightly higher blend glass transition temperature. The miscibility domain widths are reduced when using MMA-MATRIFE copolymers as compared to PMMA-containing blends and miscibility limits are dependent on the MATRIFE content in the methacrylic copolymer. Moreover, PVDF or VDF copolymer melting enthalpy decrease is associated to a partial dissolution of the semi-crystalline polymer in PMMA or MMA-MATRIFE copolymer above the total miscibility limit. The evolution of dynamic moduli as a function of blends composition confirms the miscibility limits determined by DSC. The Flory-Huggins interaction parameters were determined through the melting point depression analysis and compared to correlate the intensity of inter- or intra-molecular interactions between the polymers to the postulated ‘acidity’ of hydrogen atoms in various VDF-containing polymers. The interaction parameter χ₁₂ increases with the fluoroalkyl methacrylic ester content, corresponding to a prevalence of intra-molecular on inter-molecular interactions in these blends. Similarly, PVDF offers higher χ₁₂ values as compared to VDF-TFE or particularly to VDF-TrFE copolymers. These results highlight the importance of the nature of fluorinated polymers and of the inter- or intra-molecular character of dipolar interactions on both, copolymer miscibility and interaction parameter values.     

Acute Generalized Exanthematous Pustulosis: Pathogenesis,Genetic Background,Clinical Variants and Therapy

Acute generalized exanthematous pustulosis (AGEP) is a severe, usually drug-related reaction, characterized by an acute onset of mainly small non-follicular pustules on an erythematous base and spontaneous resolution usually within two weeks. Systemic involvement occurs in about 20% of cases. The course is mostly benign, and only in rare cases complications lead to life-threatening situations. Recent studies highlight the importance of genetic variations in interleukin-36 receptor antagonist gene (IL-36RN) in the pathogenesis of this disease. The physiopathology of AGEP remains unclear, but an involvement of innate and acquired immune cells together with resident cells (keratinocytes), which recruit and activate neutrophils via production of cytokines/chemokines such as IL-17, IL-36, granulocyte-macrophage colony-stimulating factor (GM-CSF), tumor necrosis factor alpha (TNFα) and chemokine (C-X-C motif) ligand 8 (CXCL8)/IL-8, has been postulated. Treatment is based on the removal of the causative drug, supportive care, infection prevention and use of potent topical or systemic steroids.