Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

A model for preventive maintenance operations and forecasting

Equipment costs constitute the greatest majority of overall costs for semiconductor manufacturing. Therefore, maintaining high equipment availability has been regarded as one of the major goals in the industry. The ability to forecast correctly equipment preventive maintenance (PM) timing requirements not only can help optimizing equipment uptime but also minimizing negative impacts on manufacturing production efficiency. This research used grey theory and evaluation diagnosis to construct a PM forecasting model for prediction of PM timing of various machines. The results showed significant improvements of PM timing predictions compared to the existing method based on experience and an alternative method proposed by Li and Chang (Semiconductor Manufacturing Technology Workshop 2002: 10–11, pp. 275–277) for the same fab cases. Received: June 2005 / Accepted: December 2005     

High density polyethylene-wood flour composite lumber: efficacy of two proprietary biocides in the control of fungal colonization and discoloration

Two proprietary biocides were compounded and extruded at three concentrations, respectively, into high density polyethylene-maple wood flour lumber (HDPE-MWL) and evaluated for their efficacy to control fungal colonization and discoloration using the ASTM Standard G 21-96. Although the silver biocide used in this study did not control fungal colonization and discoloration of HDPE-MWL, statistically significant difference was observed between the highest silver biocide concentration and those of the two lower silver biocide concentrations. The latter exhibited no significant difference with the controls. In contrast, the three levels of zinc biocides showed significant difference from each other with respect to their efficacy against fungal colonization and discoloration of HDPE-MWL. Overall, only the zinc biocide was efficacious against fungal colonization and discoloration. The biocide containing zinc as an active biocidal agent was most efficacious at 1% (by weight) concentration.     

A distributed adverse drug reaction detection system using intelligent agents with a fuzzy recognition‐primed decision model

Discovering unknown adverse drug reactions (ADRs) in postmarketing surveillance as early as possible is highly desirable. Nevertheless, current postmarketing surveillance methods largely rely on spontaneous reports that suffer from serious underreporting, latency, and inconsistent reporting. Thus these methods are not ideal for rapidly identifying rare ADRs. The multiagent systems paradigm is an emerging and effective approach to tackling distributed problems, especially when data sources and knowledge are geographically located in different places and coordination and collaboration are necessary for decision making. In this article, we propose an active, multiagent framework for early detection of ADRs by utilizing electronic patient data distributed across many different sources and locations. In this framework, intelligent agents assist a team of experts based on the well‐known human decision‐making model called Recognition‐Primed Decision (RPD). We generalize the RPD model to a fuzzy RPD model and utilize fuzzy logic technology to not only represent, interpret, and compute imprecise and subjective cues that are commonly encountered in the ADR problem but also to retrieve prior experiences by evaluating the extent of matching between the current situation and a past experience. We describe our preliminary multiagent system design and illustrate its potential benefits for assisting expert teams in early detection of previously unknown ADRs. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 827–845, 2007.     

Hippocampal lesions impair memory of short-delay conditioned eye blink in rabbits.

Involvement of hippocampus in short-delay eye blink conditioning was reexamined during conditioned response (CR) consolidation. Rabbits received bilateral hippocampectomy, removal of overlying neocortex, or sham lesions and were trained with tone/puff pairings to early acquisition (consolidation) or well trained (overtraining); retention was tested. Two effects were observed: (1) Rabbits with hippocampal lesions showed less retention in the consolidation experiment than controls. Previous studies may not have found this because initial training was more complete. Overtrained hippocampal rabbits showed more retention, which agrees with this suggestion. (2) Hippocampectomized rabbits showed larger CR amplitudes in the overtraining experiment. The complementary roles of hippocampus in the consolidation process during early learning and in modulating the expression of the amplitude/time course of behavioral CRs after associations are well learned are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Particle Penetration through Inclined and L-Shaped Cracks

This paper presents a particle penetration model predicting particle penetration coefficient (Pp) through a narrow crack of arbitrary incline angles (θ). The objective was to simulate Pp for outdoor-to-indoor particle penetration for residential infiltration conditions. This model assumes laminar infiltration flow and considers particle deposition from both gravitational sedimentation and Brownian diffusion. For micron-sized particles, modeling results indicate that gravitational sedimentation is the major deposition mechanism. Pp increases monotonically with ∣θ∣ because effective particle sedimentation velocity (vs?cos?θ) decreases monotonically with ∣θ∣. For submicron-sized particles (0.1?μm), Brownian diffusion is the major particle deposition mechanism. Because Brownian diffusion is a nondirectional deposition mechanism, crack inclination did not affect Pp. This study applied this model to estimate Pp for L-shaped cracks, and validated modeling results with experiments. Experimental results indicated that inertial impaction and crack entrance cutoff effects were not significant particle deposition mechanisms for the test micron-sized particles. Gravitational sedimentation was the major deposition mechanism. An L-shaped crack can be simulated as the combination of horizontal and vertical sections. This model agreed reasonably with experimental results.     

Two-Dimensional Physical and Numerical Modeling of a Pile-Supported Earth Platform over Soft Soil

This paper focuses on the mechanisms occurring in a granular earth platform over soft ground improved by rigid piles. Two-dimensional physical model experiments were performed using the Schneebeli’s analogical soil to investigate the load transfer mechanisms by arching and the settlement reduction and homogenization. Experimental outputs are compared to results obtained on a numerical model using a plane strain continuum approach. The impact of the constitutive model complexity to simulate the platform material behavior was first assessed, but no large difference was recorded. As far as the proposed model, which takes the main features of the observed behavior satisfactorily into account, the numerical procedure could be validated and the parametric studies extended numerically. Both approaches of this study underlined the main geometrical and geotechnical parameters which should inevitably be taken into account in a simplified design method, namely the capping ratio, the platform height, and the platform material shear strength.     

Polynomial-Space Decidable Membership Problems for Recurrent Systems over Sets of Natural Numbers

A finite recurrent system over sets of natural numbers of dimension n is a pair composed of n n-ary functions over sets of natural numbers and an n-tuple of singleton sets of natural numbers. Every function is applied to the entries of the tuple and computes a set of natural numbers, that may also be empty. The results are composed into another tuple, and the process is started anew. Thus, a finite recurrent system defines an infinite sequence of n-tuples containing sets of natural numbers. The last entry of a generated n-tuple is called the output of a step, and the union of the output sets of all steps is the set defined by the finite recurrent system. Membership problems ask whether a given number is in a specified output set or in some output set. We study membership problems for special finite recurrent systems, whose functions are built from the set operations union, intersection and complementation and the arithmetical operations addition and multiplication. Sum and product of two sets of natural numbers are defined elementwise. We restrict the set of operations from which functions are built and determine the impact on the complexity of the membership problems. We focus on PSPACE-decidable membership problems and show completeness results for the complexity classes NL, NP and PSPACE.