Surface chemistry and mechanical property changes of wood‐flour/high‐density‐polyethylene composites after accelerated weathering

Although wood–plastic composites have become more accepted and used in recent years and are promoted as low‐maintenance, high‐durability building products, they do experience a color change and a loss in mechanical properties with accelerated weathering. In this study, we attempted to characterize the modulus‐of‐elasticity (MOE) loss of photostabilized high‐density polyethylene (HDPE) and composites of wood flour and high‐density polyethylene (WF/HDPE) with accelerated weathering. We then examined how weathering changed the surface chemistry of the composites and looked at whether or not the surface changes were related to the MOE loss. By examining surface chemistry changes, we hoped to begin to understand what caused the weathering changes. The materials were left unstabilized or were stabilized with either an ultraviolet absorber or pigment. After 1000 and 2000 h of accelerated weathering, the samples were tested for MOE loss. Fourier transform infrared (FTIR) spectroscopy was employed to monitor carbonyl and vinyl group formation at the surface. Changes in the HDPE crystallinity were also determined with FTIR techniques. It was determined that structural changes in the samples (carbonyl group formation, terminal vinyl group formation, and crystallinity changes) could not be reliably used to predict changes in MOE with a simple linear relationship. This indicated that the effects of crosslinking, chain scission, and crystallinity changes due to ultraviolet exposure and interfacial degradation due to moisture exposure were interrelated factors for the weathering of HDPE and WF/HDPE composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2263–2273, 2004     

Reaction kinetics modeling and thermal properties of epoxy–amines as measured by modulated‐temperature DSC. II. Network‐forming DGEBA + MDA

Reaction‐induced vitrification takes place in the network‐forming epoxy–amine system diglycidyl ether of bisphenol A (DGEBA) + methylenedianiline (MDA) when the glass‐transition temperature (T_g) rises above the cure temperature (T_cure). This chemorheological transition results in diffusion‐controlled reaction and can be followed simultaneously with the reaction rate in modulated‐temperature DSC (MTDSC). To predict the effect of T_cure and the NH/epoxy molar mixing ratio (r) on the reaction rate in chemically controlled conditions, a mechanistic approach was used based on the nonreversing heat flow and heat capacity MTDSC signals, in which the reaction steps of primary (E_1OH = 44 kJ mol^?1) and secondary amine (E_2OH = 48 kJ mol^?1) with the epoxy–hydroxyl complex predominating. The diffusion factor DF as defined by the Rabinowitch approach expresses whether the chemical reaction rate or the diffusion rate determines the overall reaction rate. A model based on the free volume theory together with an Arrhenius temperature dependency was used to calculate the diffusion rate constant in DF as a function of conversion (x) and T_cure. The relation between x, r, and T_g, needed in this model, can be predicted with the Couchman equation. An experimental approximation for DF is the mobility factor DF* obtained from the heat capacity signal at a modulation frequency of 1/60 Hz, normalized for the effect of the reaction heat capacity in the liquid state and the change in C_p in the glassy region with x and T_cure. In this way, an optimized set of diffusion parameters was obtained that, together with the optimized kinetic parameters set, can predict the reaction rate for different cure schedules and for stoichiometric and off‐stoichiometric mixtures. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2814–2833, 2004     

Recent progress in road and lane detection: a survey

The problem of road or lane perception is a crucial enabler for advanced driver assistance systems. As such, it has been an active field of research for the past two decades with considerable progress made in the past few years. The problem was confronted under various scenarios, with different task definitions, leading to usage of diverse sensing modalities and approaches. In this paper we survey the approaches and the algorithmic techniques devised for the various modalities over the last 5 years. We present a generic break down of the problem into its functional building blocks and elaborate the wide range of proposed methods within this scheme. For each functional block, we describe the possible implementations suggested and analyze their underlying assumptions. While impressive advancements were demonstrated at limited scenarios, inspection into the needs of next generation systems reveals significant gaps. We identify these gaps and suggest research directions that may bridge them.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Relationship between cell morphology and impact strength of microcellular foamed high‐density polyethylene/polypropylene blends

Polymer blends, such as those resulting from recycling postconsumer plastics, often have poor mechanical properties. Microcellular foams have been shown to have the potential to improve properties, and permit higher‐value uses of mixed polymer streams. In this study, the effects of microcellular batch processing conditions (foaming time and temperature) and HDPE/PP blend compositions on the cell morphology (the average cell size and cell‐population density) and impact strength were studied. Optical microscopy was used to investigate the miscibility and crystalline morphology of the HDPE/PP blends. Pure HDPE and PP did not foam well at any processing conditions. Blending facilitated the formation of microcellular structures in polyolefins because of the poorly bonded interfaces of immiscible HDPE/PP blends, which favored cell nucleation. The experimental results indicated that well‐developed microcellular structures are produced in HDPE/PP blends at ratios of 50:50 and 30:70. The cell morphology had a strong relationship with the impact strength of foamed samples. Improvement in impact strength was associated with well‐developed microcellular morphology. Polym. Eng. Sci. 44:1551–1560, 2004. © 2004 Society of Plastics Engineers.     

Nearly-Linear Work Parallel SDD Solvers,Low-Diameter Decomposition,and Low-Stretch Subgraphs

We present the design and analysis of a nearly-linear work parallel algorithm for solving symmetric diagonally dominant (SDD) linear systems. On input an SDD n-by-n matrix A with m nonzero entries and a vector b, our algorithm computes a vector \(\tilde{x}\) such that \(\|\tilde{x} - A^{+}b\|_{A} \leq\varepsilon\cdot\|{A^{+}b}\|_{A}\) in \(O(m\log^{O(1)}{n}\log {\frac{1}{\varepsilon}})\) work and \(O(m^{1/3+\theta}\log\frac{1}{\varepsilon})\) depth for any θ>0, where A ⁺ denotes the Moore-Penrose pseudoinverse of A. The algorithm relies on a parallel algorithm for generating low-stretch spanning trees or spanning subgraphs. To this end, we first develop a parallel decomposition algorithm that in O(mlog ^O(1) n) work and polylogarithmic depth, partitions a graph with n nodes and m edges into components with polylogarithmic diameter such that only a small fraction of the original edges are between the components. This can be used to generate low-stretch spanning trees with average stretch O(n ^α ) in O(mlog ^O(1) n) work and O(n ^α ) depth for any α>0. Alternatively, it can be used to generate spanning subgraphs with polylogarithmic average stretch in O(mlog ^O(1) n) work and polylogarithmic depth. We apply this subgraph construction to derive a parallel linear solver. By using this solver in known applications, our results imply improved parallel randomized algorithms for several problems, including single-source shortest paths, maximum flow, minimum-cost flow, and approximate maximum flow.     

Electrochemical study of liquid-solid mass transfer in packed bed electrodes with upward and downward co-current gas-liquid flow

Hydrodynamic and mass transfer parameters (pressure drop, gas and liquid hold-up, liquid-solid mass transfer coefficients) have been measured for porous electrodes with upward or downward co-current gas-liquid flow by means of several electrochemical techniques. The influence of the most important parameters (packing diameter, gas and liquid flow rates) and of the hydrodynamic flow regimes, has been studied. It is found that in the trickle flow regime the limiting current densities depend only on the liquid flow rates (with no measurable influence of the gas). In the upward flow configuration, the strong turbulence generated by the ascending gas bubbles leads to a sharp increase of current densities with the gas flow rate. A comparison between both configurations is presented.     

On the Relation of Job Insecurity,Job Autonomy,Innovative Work Behaviour and the Mediating Effect of Work Engagement

European policy is focusing on innovation as a way out of the economic crisis. At the same time, job insecurity is rising as Europe is still in crisis. In this paper, we examine whether job insecurity affects the innovative work behaviour of employees by focusing on the relation between job insecurity, job autonomy, work engagement and innovative work behaviour (IWB). Using employee level survey data, we use structural equation modelling to disentangle the relations between these variables. The partially mediated model shows the best fit with the data. This model shows that job insecurity and autonomy are both directly and indirectly, through work engagement, related with IWB. For autonomy these relations are positive, while they are negative (and smaller) for job insecurity. Moreover, a negative covariance is observed between job insecurity and autonomy.