A novel approach to fabricate Si3N4 by selective laser melting

Difficulties in sintering refractory ceramics limit their potential high-demanding applications. Selective laser sintering/melting of ceramics is extremely challenging due to poor sinterability of refractories caused by a low thermal shock resistance and an insufficient electron conductivity blocking absorption of laser electron beam energy, etc. Here, we propose a new approach to fabricate Si₃N₄-based complex geometry parts by selective laser sintering. This is a two-step approach including (i) selective laser sintering of silicon powder providing a needed shape, and (ii) nitridation of the as-shaped silicon parts aimed at fabrication of the Si₃N₄ component. Parametric study of the process has been performed for optimization of the sintering parameters, such as laser current, point distance and exposure time. The silicon component of full Archimedes density, 12?GPa Vickers hardness and 432?MPa compressive strength has been produced by SLS technique. Effect of different catalysts (Ni-, Cr-, Co-based) on the nitridation of the shaped silicon parts has been thoroughly studied. The conversion degree of nitridation reaches 50% with Ni-based catalyst subjecting growth of Si₃N₄ nanofibers on the surface of the component.     

MTDATA and the Prediction of Phase Equilibria in Oxide Systems: 30 Years of Industrial Collaboration

This paper gives an introduction to MTDATA, Phase Equilibrium Software from the National Physical Laboratory (NPL), and describes the latest advances in the development of a comprehensive database of thermodynamic parameters to underpin calculations of phase equilibria in large oxide, sulfide, and fluoride systems of industrial interest. The database, MTOX, has been developed over a period of thirty years based upon modeling work at NPL and funded by industrial partners in a project co-ordinated by Mineral Industry Research Organisation. Applications drawn from the fields of modern copper scrap smelting, high-temperature behavior of basic oxygen steelmaking slags, flash smelting of nickel, electric furnace smelting of ilmenite, and production of pure TiO₂ via a low-temperature molten salt route are discussed along with calculations to assess the impact of impurities on the uncertainty of fixed points used to realize the SI unit of temperature, the kelvin.     

The jackknife as an approach for uncertainty assessment in gamma spectrometric measurements of uranium isotope ratios

The jackknife as an approach for uncertainty estimation in gamma spectrometric uranium isotope ratio measurements was evaluated. Five different materials ranging from depleted uranium (DU) to high enriched uranium (HEU) were measured using gamma spectrometry. High resolution inductively coupled plasma mass spectrometry (ICP-SFMS) was used as a reference method for comparing the results obtained with the gamma spectrometric method. The relative combined uncertainty in the gamma spectrometric measurements of the ²³⁸U/²³⁵U isotope ratio using the jackknife was about 10-20% (k = 2), which proved to be fit-for-purpose in order to distinguish between different uranium categories. Moreover, the enrichment of ²³⁵U in HEU could be measured with an uncertainty of 1-2%.     

Self-Reinforced α-SiAlON Ceramics with Improved Damage Tolerance Developed by a New Processing Strategy

Alpha-SiAlON ceramics with a refined self-reinforced microstructure, i.e., containing acicular grains with dimensions much smaller than those obtained in previous studies, embedded in a matrix consisting of submicrometer-sized isotropic grains, were prepared by applying a rapid one-step sintering procedure. To suppress the overabundant formation of α-SiAlON nuclei, a combination of stabilizing cations, Y + Yb, was used; to encourage formation of acicular α-SiAlON grains, a small amount of an extra liquid (∼3 vol%) was introduced; to avoid abnormal grain coarsening resulting from dynamic ripening, the final sintering temperature was set to just slightly above the minimum temperature threshold for activating grain growth (1700°C). The fully dense compacts obtained exhibited excellent thermal-shock resistance, and hardness and fracture toughness values of 20 GPa and 5.1 MPa·m^1/2, respectively.     

Cell death and differentiation in the development of the endocardial cushion of the embryonic heart

The transformation of the endocardial cushion into valves and septa is a critical step in cardiac morphogenesis as it initiates the development of the four-chambered heart. This transformation results from a region-specific balance between cellular proliferation, apoptosis, and differentiation. The development of the form and structure of the endocardial cushion is accompanied by precise patterns of abundant cell death having the morphological features of programmed cell death (apoptosis), which plays an important role in the elimination of redundant cells and in changes of phenotypic composition during histogenesis. Apoptosis is an essential process in morphogenesis as it balances mitosis in renewing tissues. It is controlled by one or more genetic programs that kill the targeted cell. However, the causes, role, and regulation of apoptosis in the developing endocardial cushion still remain to be determined. The clarification of the role of the apoptosis regulatory genes constitutes a major task in future studies of cell death in the developing heart. This new molecular histology of heart development awaits further experiments to clarify the interactive mechanisms that act to ensure the sculpting of the endocardial cushion into valves and septa by determining the size of the cushion cell populations. The relation between the expression of different factors and the modifications of the cushion region during cardiac development are reviewed. In addition, we review and summarize information on molecules identified in our experiments that imply the activity of a number of essential genes coinciding with the key steps in generating the overall architecture of the heart. We correlate their temporal and spatial expression with their proposed roles.     

Methoxybutropate microencapsulation by gelatin-acacia complex coacervation

Microcapsules of methoxybutropate solid particles or of an oily saturated solution of the same drug were prepared by complex coacervation between gelatin and acacia and dried with three different methods: isopropanol addition, spray-drying, and freeze-drying. Successively, microparticles were analyzed by infrared thermobalance, ultraviolet (UV) spectroscopy, optical and scanning electron microscopy, and sieves to find out parameters such as yield, moisture content, encapsulation percentage, morphology of solid particles, and particle size. Results highlighted that the most appropriate drying method for industrial purposes was spray-drying, particularly for oil-containing microcapsule formulations.     

Experimental Study and Modelling of Viscosity of Chromium Containing Slags

Viscosities of slags containing Al₂O₃, CaO, CrO_x, MgO and SiO₂ were measured in contact with metallic chromium using the rotating cylinder method. The modified Urbain model, developed at the University of Queensland, was extended to include MgO, CrO and Cr₂O₃, in addition to existing Al₂O₃, CaO, FeO and SiO₂. Chromium oxides, in general, decrease the slag viscosity, although addition of trivalent oxide raises up the liquidus temperature and thus limits the measuring range. The model was able to describe the viscosity of complex slags reasonably well in most experimental cases.     

Proactive management of distributed organisational computing: Prevention always pays, doesn't it?

Organisations have eagerly adopted the new opportunities provided by distributed computing technology. These opportunities have also created new dependency on the technology and threats of technical problems. Information technology (IT) management has to choose its position towards these new technical risks. Should the problems be prevented proactively in advance or settled reactively afterwards? This paper draws conclusions from an action research case study aimed at proactive versus reactive end-user support. Between 1994 and 1997 one of the business units in Nokia Telecommunications required a new approach for its distributed information systems (IS) to facilitate rapid organisational growth. The distributed IS and its end-user support were established and organised during a 30-month re-engineering process. These results provide a new view to the dependencies between business processes and IT. The new distributed IT has become, often insidiously, a necessity for vital business processes. Therefore, risk management should be adopted as a standard tool for IS management to identify such dependencies. Proactive actions should be aimed at those areas where IT-related business risks are identified. Proactivity should be supplemented by reactive support to provide daily assistance for the end-users.     

Eye movement assessment of selective attentional capture by emotional pictures.

The eye-tracking method was used to assess attentional orienting to and engagement on emotional visual scenes. In Experiment 1, unpleasant, neutral, or pleasant target pictures were presented simultaneously with neutral control pictures in peripheral vision under instruction to compare pleasantness of the pictures. The probability of first fixating an emotional picture, and the frequency of subsequent fixations, were greater than those for neutral pictures. In Experiment 2, participants were instructed to avoid looking at the emotional pictures, but these were still more likely to be fixated first and gazed longer during the first-pass viewing than neutral pictures. Low-level visual features cannot explain the results. It is concluded that overt visual attention is captured by both unpleasant and pleasant emotional content. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Foliar Phenolics are Differently Associated with Epirrita autumnata Growth and Immunocompetence

The quality of available food may affect insect herbivores directly (via growth and survivorship) and/or indirectly (by modifying insect vulnerability to parasitoids and pathogens). We examined the relationship between different phenolic compounds, belonging to various phenolic groups, in Betula pubescens spp. czerepanovii (mountain birch) foliage and the larval performance of the geometrid Epirrita autumnata (autumnal moth). Direct effects on insect performance were described by pupal weight, developmental rate, and survivorship; indirect effects were described by the encapsulation rate of an implant inserted into the insect hemocoel, a commonly used way to describe insect immune defense. We found profound differences in the effects of different phenolic categories: several individual hydrolyzable tannins were associated positively with larval performance but negatively with level of immune defense, whereas flavonoid glycosides were inversely related to larval survival but showed no association with the larvae immune defense.