Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

Automatic detection of depression symptoms in twitter using multimodal analysis

The Journal of Supercomputing - Depression is the most prevalent mental disorder that can lead to suicide. Due to the tendency of people to share their thoughts on social platforms, social data...     

Synergistic effect of micro- and nano-TiO2 on hydrophobic,mechanical, and electrical properties of hybrid polyurethane composites

Journal of Materials Science: Materials in Electronics - One of the ways to improve the performance of ceramic insulators in polluted climates is to use polymer coatings reinforced with ceramic...     

Production of angiotensin-converting enzyme inhibitory peptides in Iranian ultrafiltered white cheese prepared with Lactobacillus brevis KX572382

In this study, ultrafiltered (UF) Iranian white cheese made with adjunct cultures including six Lactobacillus isolates (Lactobacillus brevis, L. casei and L. plantarum) from traditional Iranian Motal cheese. The peptide extract (<5 kDa) of cheese samples were assessed for angiotensin-converting enzyme (ACE)-inhibitory activity during ripening (5 °C). Among the strains used, L. brevis KX572382 (M8) was selected because of the greater increase in (ACE)-inhibitory activity in the cheese (P < 0.05). The highest activity of M8 extract was observed on the 28th (71.72%) day of ripening (P < 0.05). Proteolytic activity assessment and RP-HPLC peptide profile of M8 water-soluble extracts (WSEs) indicated the effect of M8 on further protein degradation due to secondary proteolysis. A total of 7 different peptide sequences, previously known in the literature for their ACE-inhibitory activity, were tentatively identified by LC/ESI-MS in 28-day M8 peptide extract. Although the effect of M8 on pH and the proteolysis development in cheese was significant, no adverse effect was observed on the sensory properties. In conclusion, M8 strain can enhance the functional properties of Iranian UF white cheese.     

Effect of high-pressure homogenisation on metabolic potential of Lacticaseibacillus paracasei 90: in vitro and in situ studies in fermented milk and semihard cheese

The influence of high-pressure homogenisation (HPH) at 100 MPa on Lacticaseibacillus paracasei 90 (L90) was studied in vitro and in situ (fermented milk and cheese). Lysis and injury signs were observed in cells treated with HPH, which were linked to the release of intracellular enzymes and changes in the metabolic activity of L90. HPH treatment led to a higher lactic acid content and lower pH and pyruvic acid levels in fermented milk. The microbiological and peptide profiles of cheeses were modified by using cells or cell-free extracts of L90. Finally, this study suggests that L90 could release bioactive peptides.     

Assessment of sediment quality and pore water ecotoxicity in Kebir Rhumel basin (NE-Algeria): a combined approach

The objectives of this study are to use different approaches to assess the current pollution status in the wadis of the Kebir Rhumel basin. First, sediment trace metal contents were measured by flame atomic absorption spectroscopy. Then, sediment quality was assessed on the basis of contamination assessment indexes such as: Geoaccumulation Index (Igeo), Contamination factor (C(f)), Contamination degree (C(d)), Sediment Pollution Index (SPI) and SEQ guidelines (Consensus Sediment Quality Guidelines). In addition, several toxicity tests (Daphnia magna mobility inhibition acute test-48 h, Aliivibrio fischeri luminescence inhibition acute test - 15/30 mn and Pseudokirchneriella subcapitata growth inhibition chronic test - 72 h) were conducted to assess sediment pore water ecotoxicity. Trace metal concentrations followed the order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Indexes used indicate varying degrees of sediment quality. Igeo, C(f), C(d) and SPI reveal a polymetallic contamination dominated by two or more elements in which Cd, Cu and Pb are of greatest concern. SEQ guidelines showed that biological effects on fauna would likely be observed occasionally and/or frequently for Cd, Cr, Cu, Pb and Zn contents. Test organisms exposed to sediment pore water showed that the algal P. subcapitata test was more sensitive than the D. magna and A. fischeri tests. Hence, algal growth inhibition proved to be the most sensitive response to contaminants present in sediment extracts but a significant relationship with trace metal contents was not demonstrated.     

A novel method to investigate tensile properties of woven fabrics in all-direction

In this research, we propose a new method and instrument to measure load-extension curve of the fabric samples under all-directional extension. Using this method, fabric sample is loaded under extension in the warp, weft, and all other directions in between. Using this new method, we introduced a comprehensive tensile modulus which is affected by the fabric structures and densities. For this purpose different structures i.e. plain, Twill 2/2, Twill 1/3, and Twill 1/7 were produced with different densities. Then these samples were tested under the new method. Our results are then compared to those one would obtain under uniaxial tests, by performing independent uniaxial tests. It is shown that under all-directional test lowering the weft density decreases the tensile comprehensive modulus. Furthermore, a reduction in the floating yarns in the fabric structure decreases the tensile comprehensive modulus. It was found that among the samples tested here, plain fabric and Twill 1/7, respectively, possess the maximum and minimum comprehensive modulus. A similar trend was also observed through independent uniaxial extension, in warp or weft direction, test.     

Effect of Interlayer Interval Time on the Microstructure and Mechanical Behavior of Additively Manufactured WE43 Mg Alloy

Metallurgical and Materials Transactions A - Additive manufacturing of magnesium (Mg) alloys has gained interest for the potential to fabricate complex geometries for extreme light-weighting or...     

Reliability-based design optimization applied to structures submitted to random fatigue loads

Structural and Multidisciplinary Optimization - The reliability-based design optimization (RBDO) aims to find the most balanced design through a compromise between cost and safety when...     

Characterization of titania thin films grown by dip-coating technique

A dip-coating technique was employed to prepare anatase phase of titania thin films. Fluorine doped tin oxide substrates were used to prepare titania thin films. The samples were annealed at 550 °C for 18 h. X-ray diffraction results revealed the amorphous and anatase phases of TiO₂ for as-synthesized and annealed samples, respectively. The crystallite size of anatase TiO₂ thin films was almost 25 nm for annealed samples. UV–visible confirmed the energy band gap 3.86 and 3.64 eV for as-prepared and calcinated titania thin films. The reduction in the energy band gap could be due to the change in crystallization and agglomeration of small grains after calcination. The morphology of the prepared films was investigated by field emission scanning electron microscopy which demonstrated the agglomeration of spherical particles of TiO₂ with average particle size of about 30 nm. The molecular properties (chemical bonding) of the samples were investigated by means of Fourier Transform Infrared (FTIR) spectroscopy. FTIR analysis exhibited the formation of titania, functional group OH, hydroxyl stretching vibrations of the C–OH groups, bending vibration mode of H–O–H, alkyl C–H stretch, stretching band of Ti–OH, CN asymmetric band stretching, and C=O saturated aldehyde.