An investigation into the effects of lime on compressive and shear strength characteristics of fiber-reinforced clays

To meet the ever-increasing construction demands around the world during recent years,reinforcement and stabilization methods have been widely used by geotechnical engineers to improve the performances and behavior of fine-grained soils.Although lime stabilization increases the compressive strength of soils,it reduces the soil ductility at the same time.Recent research shows that random fiber inclusion modifies the brittleness of soils.In the current research,the effects of lime and polypropylene(PP) fiber additions on such characteristics as compressive and shear strengths,failure strain,secant modulus of elasticity(E_(50)) and shear strength parameters of mixtures were investigated.Kaolinite was treated with 1%,3% and 5% lime by dry weight of soil and reinforced with 0.1% monovalent PP fibers with the length of 6 mm.Samples were prepared at optimum conditions and cured at 35℃ for 1 d,7 d and28 d at 90% relative humidity and subsequently subjected to uniaxial and triaxial compression tests(UCT and TCT) under cell pressures of 25 kPa,50 kPa and 100 kPa.Results showed that inclusion of random PP fibers to clay-lime mixtures increases both compressive and shear strengths as well as the ductility.Lime content and curing period were found to be the most influential factors.Scanning electron microscopy(SEM) analysis showed that lime addition and the formation of cementitious compounds bind soil particles and increase soil/fiber interactions at interface,leading to enhanced shear strength.The more ductile the stabilized and reinforced composition,the less the cracks in roads and waste landfill covers.     

Intracellular behaviour of samarium and europium in lactating mammary gland

The subcellular localization of samarium and europium, two rare-earths, increasingly used in both medical and industrial fields, has been studied in several organs such as liver and kidney but never in the mammary gland despite of its importance in the biology of lactation and nutrition domains. The intracellular behaviour of samarium and europium after their intra-peritoneal administration in the lactating mammary gland cells was investigated. The results showed the presence of very electron dense deposits in the glandular epithelial cell lysosomes. These particular lysosomes were never observed in the mammary cell lysosomes of control rats. These intralysosomal deposits were probably composed of insoluble samarium or europium phosphates by analogy with previous studies, the transmission electron microscopy, the ion mass microscopy and the electron probe microanalysis, and other techniques allowing the identification of the chemical structure of the intralysosomal deposits.     

Silver nanoparticles deposited on porous silicon as a surface-enhanced Raman scattering (SERS) active substrate

Silver nanoparticles were deposited spontaneously from their aqueous solution on a porous silicon (PS) layer. The PS acts both as a reducing agent and as the substrate on which the nanoparticles nucleate. At higher silver ion concentrations, layers of nanoparticle aggregates were formed on the PS surface. The morphology of the metallic layers and their SERS activity were influenced by the concentrations of the silver ion solutions used for deposition. Raman measurements of rhodamine 6G (R6G) and crystal violet (CV) adsorbed on these surfaces showed remarkable enhancement of up to about 10 orders of magnitude.     

Non-Uniformity of Heavy-Ion Beam Irradiation on a Direct-Driven Pellet in Inertial Confinement Fusion

Heavy-ion-driven fusion (HIF) is a scheme to achieve inertial confinement fusion (ICF). Investigation of the non-uniformity of heavy-ion beam (HIB) irradiation is one of the key issues for ICF driven by powerful heavy-ion beams. Ions in HIB impinge on the pellet surface and deposit their energy in a relatively deep and wide area. Therefore, the non-uniformity of HIB irradiation should be evaluated in the volume of the deposition area in the absorber layer. By using the OK1 code with some corrections, the non-uniformityof heavy-ion beam irradiation for the different ion beams on two kinds of targets were evaluated in 12-, 20-, 60- and 120-beam irradiation schemes. The root-mean-square (RMS) non-uniformity value becomes σRMS= 8. 39% in an aluminum mono-layer pellet structure and σRMS= 6.53% in a lead-aluminum layer target for the 12-uranium-beam system. The RMS non-uniformity for the lead-aluminum layer target was lower than that for the mono-layer target. The RMS and peak-to-valley (PTV) non-uniformities are reduced with the increase in beam number, and low at the Bragg peak layer.     

Raman and infrared fingerprint spectroscopy of peroxide-based explosives

A comparative study of the vibrational spectroscopy of peroxide-based explosives is presented. Triacetone triperoxide (TATP) and hexamethyl-enetriperoxide-diamine (HMTD), now commonly used by terrorists, are examined as well as other peroxide-ring structures: DADP (diacetone diperoxide); TPTP [3,3,6,6,9,9-Hexaethyl-1,2,4,5,7,8-hexaoxo-nonane (tripentanone triperoxide)]; DCypDp {6,7,13,14-Tetraoxadispiro [4.2.4.2]tetradecane (dicyclopentanone diperoxide)}; TCypDp {6,7,15,16,22,23-Hexaoxatrispiro[4.2.4.2.4.2] henicosane (tricyclopentanone triperoxide)}; DCyhDp {7,8,15,16-tetraoxadispiro [5.2.5.2] hexadecane (dicyclohexanone diperoxide)}; and TCyhTp {7,8,14,15,21,22-hexaoxatrispiro [5.2.5.2.5.2] tetracosane (tricyclohexanone triperoxide)}. Both Raman and infrared (IR) spectra were measured and compared to theoretical calculations. The calculated spectra were obtained by calculation of the harmonic frequencies of the studied compounds, at the density functional theory (DFT) B3LYP/cc-pVDZ level of theory, and by the use of scaling factors. It is found that the vibrational features related to the peroxide bonds are strongly mixed. As a result, the spectrum is congested and highly sensitive to minor changes in the molecule.     

Dynamics of a contrast agent microbubble attached to an elastic wall

A modified Rayleigh-Plesset equation is derived to model the oscillation of a contrast agent microbubble attached to an elastic wall. The obtained equation shows that contact with the wall affects the bubble oscillation as if the bubble oscillated in a liquid with a changed (effective) density. Depending on the wall properties, the effective density can be either higher or lower than the real liquid density and hence the natural frequency of the attached bubble can be either lower or higher than the natural frequency of the same bubble in an unbounded liquid. Numerical simulations are made for a contrast bubble with shell properties similar to those used in the Marmottant shell model. The cases of a rigid wall and a plastic wall are compared. The properties of the plastic wall are set to correspond to walls of OptiCell chambers commonly used in experiments. It is shown that contact with the rigid wall decreases the natural frequency of the bubble as compared to its natural frequency in an unbounded liquid, whereas contact with the OptiCell wall increases the natural frequency of the bubble. Bubble resonance curves for three cases are compared: the bubble in an unbounded liquid; the bubble at a distance from an OptiCell wall; the bubble in contact with an OptiCell wall. Results obtained for a 2- μm -radius bubble insonified with a 10-cycle, 40 kPa, 2.1 MHz Gaussian pulse show that contact with the OptiCell wall leads to the following effects. The amplitude of the radial oscillation of the attached bubble is decreased by about 70% as compared to that of the same bubble in an unbounded liquid. The fundamental component in the spectrum of the scattered pressure of the attached bubble is decreased by 12 dB. A strong second harmonic appears in the spectrum of the scattered pressure of the attached bubble; its magnitude is about 11.5 dB higher than the level corresponding to the case of an unbounded liquid.     

A novel low voltage very low power CMOS class AB current output stage with ultra high output current drive capability

In this paper a novel low voltage (LV) very low power (VLP) class AB current output stage (COS) with extremely high linearity and high output impedance is presented. A novel current splitting method is used to minimize the transistors gate–source voltages providing LV operation and ultra high current drive capability. High linearity and very high output impedance are achieved employing a novel resistor based current mirror avoiding conventional cascode structures to be used. The operation of the proposed COS has been verified through HSPICE simulations based on TSMC 0.18 μm CMOS technology parameters. Under supply voltage of ±0.7 V and bias current of 5 μA, it can deliver output currents as high as 14 mA with THD better than ?53 dB and extremely high output impedance of 320 MΩ while consuming only 29 μW. This makes the proposed COS to have ultra large current drive ratio (I_outmax/I_bias or the ratio of peak output current to the bias current of output branch transistors) of 2800. By increasing supply voltage to ±0.9 V, it can deliver extremely large output current of ±24 mA corresponding to 3200 current drive ratio while consuming only 42.9 μW and exhibiting high output impedance of 350 MΩ. Interestingly, the proposed COS is the first yet reported one with such extremely high output current and a THD even less than ?45 dB. Such ultra high current drive capability, high linearity and high output impedance make the proposed COS an outstanding choice for LV, VLP and high drive current mode circuits. The superiority of the proposed COS gets more significance by showing in this work that conventional COS can deliver only ±3.29 mA in equal condition. The proposed COS also exhibits high positive and negative power supply rejection ratio (PSRR+/PSRR?) of 125 dB and 130 dB, respectively. That makes it very suitable for LV, VLP mixed mode applications. The Monte Carlo simulation results are provided, which prove the outstanding robust performance of the proposed block versus process tolerances. Favorably the proposed COS resolves the major limitation of current output stages that so far has prevented designing high drive current mode circuits under low supply voltages. In brief, the deliberate combination of so many effective novel methods presents a wonderful phenomenal COS block to the world of science and engineering.     

Minimization of exceptional elements and voids in the cell formation problem using a multi-objective genetic algorithm

Cell formation problem is the main issue in designing cellular manufacturing systems. The most important objective in the cell formation problem is to minimize the number of exceptional elements which helps to reduce the number of intercellular movements. Another important but rarely used objective function is to minimize the number of voids inside of the machine cells. This objective function is considered in order to increase the utilization of the machines. We present a bi-objective mathematical model to simultaneously minimize the number of exceptional elements and the number of voids in the part machine incidence matrix. An ε-constraint method is then applied to solve the model and to generate the efficient solutions. Because of the NP-hardness of the model, the optimal algorithms can not be used in large-scale problems and therefore, we have also developed a bi-objective genetic algorithm. Some numerical examples are considered to illustrate the performance of the model and the effectiveness of the solution algorithms. The results demonstrate that in comparison with the ε-constraint method, the proposed genetic algorithm can obtain efficient solution in a reasonable run time.