Reliability-based design optimization applied to structures submitted to random fatigue loads

Structural and Multidisciplinary Optimization - The reliability-based design optimization (RBDO) aims to find the most balanced design through a compromise between cost and safety when...     

Fabrication and characterization of silk/forsterite composites for tissue engineering applications

In this research, novel composite scaffolds consisting of silk fibroin and forsterite powder were prepared by a freeze-drying method. In addition, the effects of forsterite powder contents on the structure of the scaffolds were investigated to provide an appropriate composite for bone tissue engineering applications. The morphology studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques showed that the forsterite ceramic was well distributed throughout the structures of SF/forsterite scaffolds. Furthermore, the forsterite powder (up to 40 wt%) was homogenously distributed within the silk fibroin as a matrix.     

以创新的保护方法适应ESD保护界线变化

设计工程师为了应对诸如HDMI、SATA、MIPI和DisplayPort等新的输入/输出（I/O）接口要求的更高数据率,必须考虑降低ESD保护器件的电容。然而,由于更精微的工艺几何尺寸更易受到ESD冲击的影响,制造商迫切期望提供更高等级的保护。     

Zn–Ni/nano-TiO2 composite electrodeposits: surface modifications and protective properties

Zn–Ni composite coatings were obtained by electrochemical co-deposition of TiO₂ nano-particles (mean diameter 21 nm). Zn–Ni alloy coating was also produced under the same experimental conditions for comparison. The surface morphology, crystallographic structure, and the grain size of the deposits were investigated, along with the percentage of the embedded nano-particles in Zn–Ni matrix, as a function of concentration of TiO₂ nano-particles in the bath. As the titania incorporation percentage is increased, a grain refinement in the nanometer region was revealed followed enhanced microhardness values and an improvement of the content of the nickel in the alloy. Annealing of all coatings at 200 °C revealed the crystallization of the matrix accompanied by a decrease of microhardness followed by stability for 24 h. The corrosion behavior of Zn–Ni/nano-TiO₂ composite coatings with various amount of particle content was mainly studied by electrochemical impedance spectroscopy in 3 % NaCl. It was seen that Zn–Ni/nano-TiO₂ composite coatings exhibited higher corrosion resistances comparing to Zn–Ni alloy coating and corrosion protection improved with increasing nano-TiO₂ in coatings.     

Hydrogels containing silver nanoparticles for burn wounds show antimicrobial activity without cytotoxicity

This research introduces a novel dressing for burn wounds, containing silver nanoparticles in hydrogels for infected burn care. The 2‐acrylamido‐2‐methylpropane sulfonic acid sodium salt hydrogels containing silver nanoparticles have been prepared via ultraviolet radiation. The formation of silver nanoparticles was monitored by surface plasmon bands and transmission electron microscopy. The concentration of silver nitrate loaded in the solutions slightly affected the physical properties and mechanical properties of the neat hydrogel. An indirect cytotoxicity study found that none of the hydrogels were toxic to tested cell lines. The measurement of cumulative release of silver indicated that 70%–82% of silver was released within 72 hr. The antibacterial activities of the hydrogels against common burn pathogens were studied and the results showed that 5 mM silver hydrogel had the greatest inhibitory activity. The results support its use as a potential burn wound dressing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40215.     

Reductive removal of hexavalent chromium from aqueous solution using sepiolite-stabilized zero-valent iron nanoparticles: Process optimization and kinetic studies

We studied the optimization of hexavalent chromium (Cr(VI)) removal from aqueous solution using the synthesized zero-valent iron nanoparticles stabilized with sepiolite clay (S-ZVIN), under various parameters such as reaction time (min), initial solution pH and concentration of S-ZVIN (g·L^?1) using response surface methodology (RSM). The kinetic study of Cr(VI) was conducted using three types of the most commonly used kinetic models including pseudo zero-order, pseudo first-order, and pseudo second-order models. The rate of reduction reaction showed the best fit with the pseudo first-order kinetic model. The process optimization results revealed a high agreement between the experimental and the predicted data (R²=0.945, Adj-R²=0.890). The results of statistical analyses showed that reaction time was the most impressive factor influencing the efficiency of removal process. The optimum conditions for maximum response (98.15%) were achieved at the initial pH of 4.7, S-ZVIN concentration of 1.3 g·L^?1 and the reaction time of 75 min.     

Oscillatory power number,power density model,and effect of restriction size for a moving-baffle oscillatory baffled column using CFD modelling

Although single-hole oscillatory columns have been studied since the 1990s, to this day there is an absence of appropriate dimensionless groups to express the hydrodynamic conditions and power requirement for the moving-baffle oscillatory baffled column (OBC). This paper uses computational fluid dynamic (CFD) software coupled with moving overset meshing to aid in the derivation of the first dimensionless oscillatory power number for OBCs. In terms of the moving-baffle OBC, this work marks the first time a power density equation has been derived specifically to account for this column's unique hydrodynamic profile. Equations for period-averaged Reynolds number and period-averaged Strouhal numbers were developed to better estimate the fluid intensity within these moving-baffle columns. This work serves as an example of how complex and challenging flow regimes, such as periodically oscillating flow, can be simplified and analyzed to produce appropriate design equations.     

Phytochemical and bioactive compounds identification of Ocimum tenuiflorum leaves of methanol extract and its fraction with an anti-diabetic potential

Phytochemical screening assay on crude extracts of Ocimum tenuiflorum L. leaves and methanol fractions was performed in this study. Phytochemical qualitative assay on aqueous crude extract and aqueous fraction did not show any steroid and terpenoid. However, ethanol and butanol fractions also did not show steroid in the screening test. The result of HPLC identification of active crude extracts and active fractions showed the possible bioactive compounds in this plant extracts, which may control diabetes. These findings showed that the active crude extract (methanol) and its active fractions (ethyl acetate, and butanol) showed the presence of polyphenolic active constituents such as 3,4-dimethoxycinnamic acid, caffeic acid, diosmetin, luteolin, kaempferol, rosmarinic acid, apigenin, and genistein that control the blood glucose in diabetic rats. Furthermore, isolation of the active components may pave the way for the development of new agents for the treatment of diabetes and its complications.     

Multi-reservoir Operation Rules: Multi-swarm PSO-based Optimization Approach

Reservoir operation rules are intended to help an operator so that water releases and storage capacities are in the best interests of the system objectives. In multi-reservoir systems, a large number of feasible operation policies may exist. System engineering and optimization techniques can assist in identifying the most desirable of those feasible operation policies. This paper presents and tests a set of operation rules for a multi-reservoir system, employing a multi-swarm version of particle swarm optimization (MSPSO) in connection with the well-known HEC-ResPRM simulation model in a parameterization–simulation–optimization (parameterization SO) approach. To improve the performance of the standard particle swarm optimization algorithm, this paper incorporates a new strategic mechanism called multi-swarm into the algorithm. Parameters of the rule are estimated by employing a parameterization–simulation–optimization approach, in which a full-scale simulation model evaluates the objective function value for each trial set of parameter values proposed with an efficient version of the particle swarm optimization algorithm. The usefulness of the MSPSO in developing reservoir operation policies is examined by using the existing three-reservoir system of Mica, Libby, and Grand Coulee as part of the Columbia River Basin development. Results of the rule-based reservoir operation are compared with those of HEC-ResPRM. It is shown that the real-time operation of the three reservoir system with the proposed approach may significantly outperform the common implicit stochastic optimization approach.