Rapidly tunable optical add-drop multiplexer utilising relaxed beam splitters

A polarisation-independent four-port electro-optic tunable filter in the 1530 nm wavelength regime utilising non-polarising relaxed beam splitters and strain-induced polarisation converters on LiNbO₃ with 16 nm tuning range and 46 ns tuning speed is reported.     

Spectrally stable Er-fiber laser for application in phase-sensitive optical time-domain reflectometry

A high degree of frequency stability in an Er-fiber laser with the Fabry-Perot configuration was achieved using a long (25-km) optical-feedback loop. The frequency-drift rate was determined to be <1 MHz/min by observing temporal fringes in an unbalanced Mach-Zehnder interferometer. Instantaneous linewidth measured with a delayed self-heterodyne interferometer was less than the 3-kHz resolution limit. The laser was utilized in an optical time-domain reflectometry experiment to detect and locate a time-varying phase perturbation applied to an optical fiber.     

Effects of bovine somatotropin on dry matter intake, milk yield and body temperature in Holstein and Jersey cows during heat stress

Thirty-one lactating Holstein and Jersey cows were used to determine the effect of daily injections of 0 or 20 mg of recombinant bST in hot, humid weather. The comparison period lasted 80 d, from mid-June through August. The maximum and minimum ambient temperature and relative humidity averaged 34.6 and 22.2 degrees C and 100 and 59.8%, respectively. Body temperatures of somatotropin-treated Holsteins were elevated over controls by .2 and .3 degrees C at the a.m. and p.m. milkings, respectively, whereas corresponding treatment effects for Jerseys were .5 and .6 degrees C, thus demonstrating a breed by treatment interaction. The response of milk and FCM yields and apparent efficiency of production to somatotropin administration depended on the level of production prior to treatment. Cows at low pretreatment production increased milk and FCM yields to a greater degree than did cows at higher production. A breed by treatment interaction showed that Holsteins increased milk and FCM yields more than Jerseys upon administration of somatotropin. Intake of DM was not affected by treatment. Cows administered bST lost BW and condition score. Greater heat stress was associated with the higher milk production of cows administered bST.     

The use of atmospheric pressure MOVPE for the growth of high performance uncooled 1300 nm DFB lasers

Manufacture of high performance uncooled 1300 nm distributed feed-back (DFB) lasers operating single mode over the −40 to +85°C range requires control of the wavelength variation across a 2″ wafer to less than 10nm and preservation of grating definition during processing and regrowth. We have used atmospheric pressure metalorganic vapor phase epitaxy, without substrate rotation to achieve the necessary uniformity. Material was assessed using photoluminescence, x-ray diffraction, transmission electron microscopy, electrochemical current/voltage profiling, and secondary ion mass spectroscopy. The devices are based on a strained quantum well structure with an n-type grating layer to provide gain coupling. The best result gave a wavelength spread across 32×32 mm center square of a 2″ InP wafer of 3 nm. Buried heterostructure DFBs manufactured with high yield in this way operate from −40 to +85°C, with thresholds at 85°C as low as 18 mA.     

Multilevel differential polarization shift keying

We analyze the performance of coherent optical communication systems which employ polarization shift keying (PolSK) modulation, introducing for the first time the requirements for multilevel, differential PolSK. For M-ary signal constellations with M>2, the three-dimensional (3-D) nature of the signal constellations within Stokes space requires the use of double-differential modulation and detection (M-DDPolSK). Coding constraints on the signals place an additional restriction on such systems. We present detailed analysis and simulations for a 6-DDPolSK modulation scheme in which the signal points are located at the vertices of an octahedron in Stokes space     

A 533-MHz BiCMOS superscalar RISC microprocessor

This 533-MHz BiCMOS very large scale integration (VLSI) implementation of the PowerPC architecture contains three pipelines and a large on-chip secondary cache to achieve a peak performance of 1600 MIPS. The 15 mm×10 mm die contains 2.7 M transistors (2M CMOS and 0.7 M bipolar) and dissipates less than 85 W. The die is fabricated in a six-level metal, 0.5-μm BiCMOS process and requires 3.6 and 2.1 V power supplies     

AlGaAs vertical-cavity surface-emitting laser responses to 4.5-MeV proton irradiation

We have irradiated single- and multimode AlGaAs vertical-cavity surface-emitting laser (VCSEL) arrays operating at a nominal wavelength of 780 nm with 4.5-MeV protons and doses ranging from 10 to 30 Mrad in the active region. We observed a peak power reduction of about 2% per Mrad in the 14-/spl mu/m aperture, multimode VCSELs. Single-mode VCSELs having an aperture of 6 /spl mu/m exhibited a smaller peak power reduction of 0.4%-1% per Mrad. A slight shift in the current threshold was observed only for the multimode VCSELs at dose levels above 10 Mrad. First results indicate a reduced VCSEL peak laser power output that is dominated by a temperature shift caused by the radiation induced increase in resistive heating. In contrast, the power reduction in edge-emitting lasers is dominated by the enhanced radiation induced nonradiative recombination rate. The VCSEL irradiation was performed with a focused ion micro beam that was rastered over the device surface, ensuring a very uniform exposure of a single device in the array.     

Error Probability of FSK Incoherent Diversity Reception with Fast Rice Fading

In this paper we compute the error performanceof noncoherent detection receivers for FSK signalstransmitted over fast frequency-flat Rician fadingchannels. Linearly time-varying fading models are used to derive closed-form expressions for the errorprobability of binary FSK signaling. Error bounds areestablished for the performance of M-ary orthogonal FSK.Simulation results are in excellent agreement with analytical predictions.     

Ultrasoft Liquid Metal Elastomer Foams with Positive and Negative Piezopermittivity for Tactile Sensing

Soft, capacitive tactile (pressure) sensors are important for applications including human–machine interfaces, soft robots, and electronic skins. Such capacitors consist of two electrodes separated by a soft dielectric. Pressing the capacitor brings the electrodes closer together and thereby increases capacitance. Thus, sensitivity to a given force is maximized by using dielectric materials that are soft and have a high dielectric constant, yet such properties are often in conflict with each other. Here, a liquid metal elastomer foam (LMEF) is introduced that is extremely soft (elastic modulus 7.8 kPa), highly compressible (70% strain), and has a high permittivity. Compressing the LMEF displaces the air in the foam structure, increasing the permittivity over a large range (5.6–11.7). This is called “positive piezopermittivity.” Interestingly, it is discovered that the permittivity of such materials decreases (“negative piezopermittivity”) when compressed to large strain due to the geometric deformation of the liquid metal droplets. This mechanism is theoretically confirmed via electromagnetic theory, and finite element simulation. Using these materials, a soft tactile sensor with high sensitivity, high initial capacitance, and large capacitance change is demonstrated. In addition, a tactile sensor powered wirelessly (from 3 m away) with high power conversion efficiency (84%) is demonstrated.