If the regenerative energy that can be produced in a country is not sufficient for the successful implementation of the energy transition, one possible solution could be the purchase of regeneratively produced electricity from countries particularly favored by meteorology. This article examines five different technologies for energy transport. The electricity is generated once in a photovoltaic system and once in a wind turbine park. The investments in the transmission technologies sometimes exceed the investments in the power generation technologies many times over. According to the available results, without considering storage, the wind turbine system, although it is specifically more expensive than the photovoltaic system, always leads to lower electricity generation costs after the energy transport. The reason is the higher number of full load hours of the wind turbine. 相似文献
In-home technologies can support older adults' activities of daily living, provide physical safety and security, and connect elders to family and friends. They facilitate aging in place while reducing caregiver burden. One of older adults' primary concerns about in-home technologies is their potential to reduce human contact, particularly from cherished caregivers. In this exploratory in situ study, we provided an ecosystem of networked monitoring technologies to six older adults and their caregivers. We analyzed the amount and content of communication between them. The amount of noncomputer-mediated communication did not decrease through the 6-week study. The content of communication coalesced into four themes: communication about the technologies, communication facilitated by technologies, intrusiveness of technologies, and fun and playfulness with the technologies. Results suggest that in-home technologies, designed with sensitivity to older adults' primary motivations, have the potential to shape and tailor important relationships in later life. 相似文献
Entanglement in high-dimensional many-body systems plays an increasingly vital role in the foundations and applications of quantum physics. In the present paper, we introduce a theoretical concept which allows to categorize multipartite states by the number of degrees of freedom being entangled. In this regard, we derive computable and experimentally friendly criteria for arbitrary multipartite qudit systems that enable to examine in how many degrees of freedom a mixed state is genuine multipartite entangled. 相似文献
In this focused issue on the theme of “Leveraging Values in Global Organizations”, we highlight several prevalent themes on national, organizational and individual values in the literature. We argue that many premises in the literature have been accepted as fact; yet there are still many avenues open to exploration. We present several paradoxes that are often overlooked or lead to inconsistencies in the literature on values. The five articles in this focused issue address these premises and paradoxes, presenting new challenges and opportunities, providing progress and paving the way for future research on leveraging values in global organizations. The selected articles explore values with respect to international alliances and subsidiaries of multinational organizations at the organizational level, among global managers at the group level, and among employees and inpatriates at the individual level of analysis. We trust that readers of this issue will agree that the articles provide novel insights into key issues in the established, yet dynamic, field of research on values in the context of global organizations. 相似文献
This RILEM round robin study with nine participating laboratories investigated bitumen ageing, its effect on chemical properties and its reproducibility. The impact of temperature used for short-term (RTFOT) binder ageing on the combined short- and long-term (PAV) aged samples was investigated; thereby the effect of reduced mixing temperature such as those relevant for warm mix asphalt technologies on long term ageing was examined. Four 70/100 penetration graded bituminous binders from different sources were selected. In addition to the standard RTFOT temperature of 163 °C, two additional temperatures, 143 and 123 °C were used. The Fourier transform infrared spectroscopy (FTIR) analysis was carried out using an integration method which considers the area below the absorbance spectrum around a band maximum using baseline and tangential approaches. A statistical investigation into the reproducibility of FTIR spectra analysis based on the accumulated data was done. To assess the reproducibility, the coefficient of variation (CV) was taken as a benchmark parameter. Carbonyl and sulfoxide indices were calculated using different baseline correction methods and tangential and baseline integration, respectively. It was shown that the tangential method was not influenced by the applied baseline correction. However, in all considered cases, the tangential method led to significantly worse reproducibility (CVs ranging from 20 to 120%) compared to the baseline method. The sulfoxide indices calculated by both methods were not affected by the baseline correction method used. Impacts of changes in the short-term ageing temperature on short- or long-term aged samples could not be found whereas differences between different binder sources could be detected. RTFOT temperature and therefore mix production temperature had a stronger impact on the formation of sulfoxide structures than for carbonyl structures. The findings from this study show the most reproducible of all considered methods when more than one laboratory is providing FTIR data. 相似文献
Due to safety considerations, electric axle drives (e-drives) are often equipped with a parking lock system, which prevents vehicle movement while parking in redundancy with the parking brake. In order to integrate the parking lock into the e‑drive, various mounting positions inside the e‑drive are eligible, which have a direct influence on the e‑drive packaging. Furthermore, engaging the parking lock may happen at small vehicle velocities and while driving downhill, leading to high loads on the e‑drive components. These loads depend on the mounting position of the parking lock and have to be considered in the design phase to prevent failure of the system. That way, the designs of shafts, gear wheels and bearings of the gearbox are affected by the parking lock integration. A suboptimally integrated parking lock system can thus lead to undesirably high costs and reduced energy efficiency of the entire e‑drive—all alongside the packaging aspect. Consequently, finding the best suitable parking lock integration for a certain e‑drive is a complex task for the design engineers. To reduce the level of problem complexity, an established computer-based system design method for e‑drives by means of a multi-objective optimization is extended to be capable of considering the parking lock integration. The proposed method is applied to a case study and the impact of the parking lock on the optimality of an exemplary e‑drive system is shown.
As much as 1.6-W average output power was emitted in a simple setup from a diffusion-bonded Nd:YAG rod with 70-100-ns Q-switched pulses at 946 nm and repetition frequencies between 15 and 45 kHz at 22-W incident diode-pump power. A Cr(4+):YAG crystal with a bleachable loss of approximately 2.5% and a length of 0.5 mm was used as a saturable absorber. The extraction efficiency was 47% in comparison with the continuous-wave laser output power of 3.37 W in the free-running regime. 相似文献
By use of the reflection of an uncoated external etalon, a diode-pumped thulium-doped YAG microchip laser was forced into a single-frequency mode. The wavelength of the single-frequency radiation was tunable over 15 nm simply by translation of the etalon relative to the laser. Output powers of 45 mW were achieved in a monolithic setup that is insensitive to vibrations. The origin of the single-frequency oscillation is the wavelength-dependent reflection of the etalon, which is coupled back into the laser resonator. This method permits the combination of inherently stable, single-frequency resonator geometries such as microchips with laser materials that have broad tuning ranges. 相似文献
Temperature-dependent denaturation of DNA restriction fragments from the pBR322 plasmid ranging in length from 46 to 910 base pairs was detected by ion-pair reversed-phase high-performance liquid chromatography using columns packed with alkylated nonporous poly(styrene/divinylbenzene) particles. The presence of acetonitrile in the mobile phase was found to decrease the melting temperatures of DNA fragments by 1.5-2 °C/% of acetonitrile in the eluent. Small fragments (<120 bp) were completely denatured between 53.6 and 63.5 °C, depending on their total GC content. Whereas retention times of completely helical DNA fragments increased gradually with increasing temperature, partial denaturation of larger DNA fragments (>150 bp) was found to reduce retention at temperatures above 53.6 °C. Therefore, micropreparative fractionation and rechromatography, together with DNA restriction analysis, were applied to identify the correct elution order of completely helical and partially denatured fragments. Inspection of the DNA sequences of partially denatured fragments revealed domains with repeating AT base pairs. Positions of partial denaturation within the pBR322 plasmid detected by chromatographic analysis were in good agreement with partial denaturation maps obtained by electron microscopy desrcibed in the literature. 相似文献