Equilibrium bulk polymerization of 1,3-dioxolan

Cationic bulk polymerization of 1,3-dioxolan has been carried out in sealed ampoules using a high vacuum technique. The polymerization is initiated with triethyl oxonium hexafluorophosphate and the equilibrium between monomer and active polymer is attained within a few hours. Specific volumes of pure monomer and polymer in solution of its own monomer have been measured. Equilibrium measurements have been performed in the 40° to 141·4°C temperature range and the ceiling temperature is estimated to be 144° ± 2°C. The effect of short polymer chains on the equilibrium is discussed briefly. Values of ΔG_lc, the free energy of polymerization of one mole of pure liquid monomer to one base-mole of amorphous polymer, are computed making allowance for the non-ideal mixing. Respective values of ?17.5 ± 0.8 kJ/mol and ?47.9 ± 2.2JK^?1mol^?1 are deduced for the corresponding ΔH_lc and ΔS_lc. ΔG_lc is also computed from published data on equilibrium polymerization of 1,3-dioxolan in various solvents and the combined results for both types of polymerization yield ΔH_lc = ?16.7 ± 0.5kJ/mol and ΔS_lc = ?45.8 ± 1.5JK^?1mol^?1 for the 20° to 140°C range.     

HOW LIQUIDS SPREAD ON SOLIDS

A theory of the wetting of solids by liquids is put forward. The theory accounts for capillary pressure gradient, gravitational potential gradient, surface tension gradient, disjoining pressure gradient driving forces of flow in thick thin-films and of surface diffusion in thin thin-films. Disjoining pressure stems from the way intermolecular forces aggregate in submicroscopically thin films. For thick thin-films of slowly varying thickness the lubrication approximation to velocity distributions is appropriate. With this approximation the spontaneous, unsteady, two-dimensional spreading of liquid is shown to be governed by a nonlinear convective-diffusion equation for the evolution of the film thickness profile. The predictions of the theory agree with Marmur and Lelah's (1980, 1981) observations of water drops spreading on glass and with Bascom, Cottington and Singleterry's (1964) and Ludviksson and Lightfoot's (1971) observations of oils spreading on high energy surfaces. The theory is used to analyze Derjaguin and co-workers' (1944, 1957, 1970) blowing-off experiments designed to measure thin-film rheology. The theory is also used to buttress the proposition that much contact angle hysteresis is due simply to slow attainment of equilibrium.     

Privacy Preserving Geo-Linkage in the Big Urban Data Era

Big data technologies and a range of Government open data initiatives provide the basis for discovering new insights into cities; how they are planned, how they managed and the day-to-day challenges they face in health, transport and changing population profiles. The Australian Urban Research Infrastructure Network (AURIN – www.aurin.org.au) project is one example of such a big data initiative that is currently running across Australia. AURIN provides a single gateway providing online (live) programmatic access to over 2000 data sets from over 70 major and typically definitive data-driven organizations across federal and State government, across industry and across academia. However whilst open (public) data is useful to bring data-driven intelligence to cities, more often than not, it is the data that is not-publicly accessible that is essential to understand city challenges and needs. Such sensitive (unit-level) data has unique requirements on access and usage to meet the privacy and confidentiality demands of the associated organizations. In this paper we highlight a novel geo-privacy supporting solution implemented as part of the AURIN project that provides seamless and secure access to individual (unit-level) data from the Department of Health in Victoria. We illustrate this solution across a range of typical city challenges in localized contexts around Melbourne. We show how unit level data can be combined with other data in a privacy-protecting manner. Unlike other secure data access and usage solutions that have been developed/deployed, the AURIN solution allows any researcher to access and use the data in a manner that meets all of the associated privacy and confidentiality concerns, without obliging them to obtain ethical approval or any other hurdles that are normally put in place on access to and use of sensitive data. This provides a paradigm shift in secure access to sensitive data with geospatial content.     

Factor Graph Modeling of Rigid‐body Dynamics for Localization,Mapping, and Parameter Estimation of a Spinning Object in Space

This paper presents a new approach for solving the simultaneous localization and mapping problem for inspecting an unknown and uncooperative object that is spinning about an arbitrary axis in space. This approach probabilistically models the six degree‐of‐freedom rigid‐body dynamics in a factor graph formulation. Using the incremental smoothing and mapping system, this method estimates a feature‐based map of the target object, as well as this object's position, orientation, linear velocity, angular velocity, center of mass, principal axes, and ratios of inertia. This solves an important problem for spacecraft proximity operations. Additionally, it provides a generic framework for incorporating rigid‐body dynamics that may be applied to a number of other terrestrial‐based applications. To evaluate this approach, the Synchronized Position Hold Engage Reorient Experimental Satellites (SPHERES) were used as a testbed within the microgravity environment of the International Space Station. The SPHERES satellites, using body‐mounted stereo cameras, captured a dataset of a target object that was spinning at ten rotations per minute about its unstable, intermediate axis. This dataset was used to experimentally evaluate the approach described in this paper, and it showed that it was able to estimate a geometric map and the position, orientation, linear and angular velocities, center of mass, and ratios of inertia of the target object.     

Considerations for linking seatpan and backrest angles

Modern ergonomic chairs typically have several dimensions that can be adjusted independently of one another. Finding a desirable setting for any one dimension can depend on how other dimensions are set, thereby confronting users with a significant control problem. One design strategy for dealing with this problem has been to link changes in seatpan and backrest angles in some ratio, such that a one‐degree change in seatpan angle is associated with a two‐ or three‐degree change in backrest angle. However, there is no evidence to justify the choice of a particular ratio. This article presents data that addresses this issue. Subjects, performing either an entry or verification task, could adjust the chair to any position. Backrest and seatpan angles were plotted over time and analyzed using both graphical and statistical methods. The resulting scatter plots do not support the industry standard, 1:2 or 1:3 ratio, of changes in seatpan to backrest angles. The possibility of a variable linkage is discussed; however, problems associated with such a solution raise the possibility that control issues might be best addressed through training and exploration.     

Verification of Knowledge Assets in Electronic Repositories: Expert- and Community-Governance

Two mechanisms that verify knowledge contributions in electronic repositories are expert-governance and community-governance. Our goal is to examine repository users' perceptions of the conditions under which these mechanisms verify knowledge contributions. Qualitative data show that perceived credibility of experts, perceived ownership of content, and experts' (meticulous) execution of governance functions are salient for expert-governance, and the perceived involvement of community members, and community members' (continuous and collective) execution of governance functions are important for community-governance.     

确保管道运输的泄漏检测技术

保证所有管道中石油从一端流向另一端不泄漏要比它的探测更加困难。比较图中的3个系统,可以看到这项技术在40多年来是如何逐步发展的。     

Use of a dark object concept and support vector machines to automate forest cover change analysis

An automated method was developed for mapping forest cover change using satellite remote sensing data sets. This multi-temporal classification method consists of a training data automation (TDA) procedure and uses the advanced support vector machines (SVM) algorithm. The TDA procedure automatically generates training data using input satellite images and existing land cover products. The derived high quality training data allow the SVM to produce reliable forest cover change products. This approach was tested in 19 study areas selected from major forest biomes across the globe. In each area a forest cover change map was produced using a pair of Landsat images acquired around 1990 and 2000. High resolution IKONOS images and independently developed reference data sets were available for evaluating the derived change products in 7 of those areas. The overall accuracy values were over 90% for 5 areas, and were 89.4% and 89.6% for the remaining two areas. The user's and producer's accuracies of the forest loss class were over 80% for all 7 study areas, demonstrating that this method is especially effective for mapping major disturbances with low commission errors. IKONOS images were also available in the remaining 12 study areas but they were either located in non-forest areas or in forest areas that did not experience forest cover change between 1990 and 2000. For those areas the IKONOS images were used to assist visual interpretation of the Landsat images in assessing the derived change products. This visual assessment revealed that for most of those areas the derived change products likely were as reliable as those in the 7 areas where accuracy assessment was conducted. The results also suggest that images acquired during leaf-off seasons should not be used in forest cover change analysis in areas where deciduous forests exist. Being highly automatic and with demonstrated capability to produce reliable change products, the TDA-SVM method should be especially useful for quantifying forest cover change over large areas.