A Rapid and Eco-Friendly Method for Determination of Hydrolysable Tannins and Its Application to Honey Samples

This paper describes the development of a rapid and clean method for the determination of hydrolysable tannins in honey samples, focusing on an easy and green sample pretreatment and low generation of waste. The proposed method is based on the reaction between KIO₃ and hydrolysable tannin compounds in acetate buffer medium (pH 4.75), with formation of a colored product measured at 525 nm. The analytical conditions were optimized using experimental design (central composite design). The linear range obtained was 40.0–740 mg L^?1 (r?=?0.998), and the detection (LOD) and quantification (LOQ) limits were 12.2 and 40.8 mg L^?1, respectively. Acetate buffer was used to ensure formation of the colored product obtained by reaction between the chromogenic reagent and the analyte. The method showed good results when applied to honey samples, with recoveries in the range of 78.3–96.1 %, and the use of diffuse reflectance spectroscopy coupled with spot test analysis provided low reagent consumption and minimized waste generation. The results obtained with the proposed method were confirmed by a spectrophotometric method.     

Pig sire type and sex effects on carcass traits,meat quality and physicochemical and sensory characteristics of Serrano dry‐cured ham

This study demonstrates that improvements in animal line selection by breeding enterprises exert a strong effect on carcass traits, meat quality and sensory characteristics of Serrano dry‐cured ham. A total of 461 pigs from the offspring of a Duroc (DU) × Landrace (LD) sow mated with two DU boars and a DU × Large White (LW) boar from three breeding enterprises were evaluated. The two DU terminal sires were significantly different (P < 0.05) in carcass conformation, backfat thickness, ham and loin yields, raw ham traits, myoglobin concentration and total pigments formed during the curing process; in addition, the two lines provided different percentages of hams (54 vs 91%) with sufficient subcutaneous fat and weight to manufacture dry‐cured Serrano hams using a slow ripening process (11 months). The DU × LW sire had the best carcass and ham traits from an economic standpoint and obtained highest scores for sensory characteristics of Serrano ham evaluated by a trained panel test; furthermore, this line provided 84% of total hams suitable for manufacturing Serrano hams by a slow process. When the sex effect was analysed, carcass and ham traits of females were more favourable, but females presented a higher incidence of pale, soft and exudative (PSE) meat and a lower percentage of hams with sufficient subcutaneous fat and weight to produce Serrano hams using a slow ripening process (61% for females and 91% for castrates). On the other hand, castrates provided Serrano hams cured by a slow procedure with better organoleptic characteristics than females. Right and left hams were similar. Copyright © 2005 Society of Chemical Industry     

NMDA and P2X7 Receptors Require Pannexin 1 Activation to Initiate and Maintain Nociceptive Signaling in the Spinal Cord of Neuropathic Rats

Pannexin 1 (Panx1) is involved in the spinal central sensitization process in rats with neuropathic pain, but its interaction with well-known, pain-related, ligand-dependent receptors, such as NMDA receptors (NMDAR) and P2X7 purinoceptors (P2X7R), remains largely unexplored. Here, we studied whether NMDAR- and P2X7R-dependent nociceptive signaling in neuropathic rats require the activation of Panx1 channels to generate spinal central sensitization, as assessed by behavioral (mechanical hyperalgesia) and electrophysiological (C-reflex wind-up potentiation) indexes. Administration of either a selective NMDAR agonist i.t. (NMDA, 2 mM) or a P2X7R agonist (BzATP, 150 μM) significantly increased both the mechanical hyperalgesia and the C-reflex wind-up potentiation, effects that were rapidly reversed (minutes) by i.t. administration of a selective pannexin 1 antagonist (10panx peptide, 300 μM), with the scores even reaching values of rats without neuropathy. Accordingly, 300 μM 10panx completely prevented the effects of NMDA and BzATP administered 1 h later, on mechanical hyperalgesia and C-reflex wind-up potentiation. Confocal immunofluorescence imaging revealed coexpression of Panx1 with NeuN protein in intrinsic dorsal horn neurons of neuropathic rats. The results indicate that both NMDAR- and P2X7R-mediated increases in mechanical hyperalgesia and C-reflex wind-up potentiation require neuronal Panx1 channel activation to initiate and maintain nociceptive signaling in neuropathic rats.     

Distribution planning with reliability options for distributed generation

The promotion of electricity generation from renewable energy sources (RES) and combined heat and power (CHP) has resulted in increasing penetration levels of distributed generation (DG). However, large-scale connection of DG involves profound changes in the operation and planning of electricity distribution networks. Distribution System Operators (DSOs) play a key role since these agents have to provide flexibility to their networks in order to integrate DG. Article 14.7 of EU Electricity Directive states that DSOs should consider DG as an alternative to new network investments. This is a challenging task, particularly under the current regulatory framework where DSOs must be legally and functionally unbundled from other activities in the electricity sector. This paper proposes a market mechanism, referred to as reliability options for distributed generation (RODG), which provides DSOs with an alternative to the investment in new distribution facilities. The mechanism proposed allocates the firm capacity required to DG embedded in the distribution network through a competitive auction. Additionally, RODG make DG partly responsible for reliability and provide DG with incentives for a more efficient operation taking into account the network conditions.     

A new approach to radioactive waste self-burial using high penetrating radiation

The method of self-burial of radioactive waste in geological formations using direct heating of rocks by radiation is proposed in this paper. In the currently known studies, thermal conductivity is considered as a main heat transfer mechanism. Application of high penetrating gamma radiation for direct melting of surrounding rocks will reduce the energy absorption inside the sinking device and will lower maximum temperature and temperature gradients in the elements of the device. In this paper, conditions of realization of the direct heating by radiation mechanism are presented and requirements to heat-generating radionuclides have been derived. Assessments of the spatial distribution of energy release in the surrounding rocks for the point and plane sources with the radionuclide ⁶⁰Co have been performed. Based on these data, the temperature distributions in the surrounding rocks and the expression for determining the descent velocity as a function of ⁶⁰Co surface activity in the sinking device have been obtained. Estimations of energy absorption fraction inside the spherical heat-generating elements filled with ⁶⁰Co and surface activity of ⁶⁰Co, necessary to achieve velocity of about 1 km per year, have been made. The results are given for granite and salt rocks.     

Poly(L‐lactic acid) with added α‐tocopherol and resveratrol: optical,physical, thermal and mechanical properties

Poly(L ‐lactic acid) (PLLA) films containing various concentrations of two natural antioxidants, α‐tocopherol and resveratrol, were fabricated by a melt compounding and compression molding process. The influence of the antioxidants on the optical properties such as color and UV‐visible light transmission was analyzed. The thermal, mechanical, rheological and physical properties of PLLA films with added antioxidants were assessed. PLLA films with added α‐tocopherol and resveratrol showed a yellowish brown color and the lightness was influenced by the presence of the antioxidants. The glass transition and melting temperatures were significantly reduced with the addition of antioxidants while enhanced thermal stability was observed, which could be a benefit and important for processing and production. PLLA films with added antioxidants were slightly more hydrophobic than neat PLLA. The combination effect of plasticizing and enhancement of the elastic modulus with differing concentrations of two antioxidants played a critical role in the mechanical and thermomechanical properties of PLLA films. The melt viscosity of the PLLA films with added antioxidants was substantially higher than that of neat PLLA. The higher melt viscosity and G′(ω) could be an indication of formation of entanglement between PLLA and the two antioxidants. Copyright © 2012 Society of Chemical Industry