Near‐infrared spectroscopy for analysis of oil content and fatty acid profile in almond flour

Almond kernels show large variability for oil content and fatty acid profile. The objective of this research was to evaluate the potential of near infrared (NIR) reflectance spectroscopy (NIRS) for the analysis of these traits in almond flour. Ground kernels of 181 accessions collected in 2009 were used for developing calibration equations for oil content and concentrations of individual fatty acids. Calibration equations were developed using second derivative transformation and modified partial least squares regression. They were validated with samples from 179 accessions collected in 2010. The accuracy of calibration equations was measured through the coefficient of determination (r²) in external validation and the ratio of the SD in the validation set to the standard error of prediction (RPD). Both r² and RPD were high for oil content (r² = 0.99; RPD = 9.24) and concentrations of oleic (r² = 0.97; RPD = 5.37) and linoleic acids (r² = 0.98; RPD = 7.35), revealing that calibration equations for these traits are highly accurate. Conversely, the accuracy of the calibration equations for palmitic (r² = 0.54; RPD = 1.41) and stearic acids (r² = 0.52; RPD = 1.44) was too low for allowing their application in practice. NIRS discrimination of oil content and concentrations of oleic and linoleic acids was mainly based on the spectral region from 2240 to 2380 nm. Practical applications : NIRS is a high‐throughput analytical technique that allows fast measurement of several traits in a single analysis without using chemical reagents. We evaluated the feasibility of analyzing oil content and concentrations of palmitic, stearic, oleic, and linoleic acids in almond flour using fruits collected during 2 years from a world germplasm collection. The fruits collected in 2009 were used for NIRS calibration, whereas the fruits collected in 2010 were used for validation. NIRS equations were highly accurate for measuring oil content and concentrations of oleic and linoleic acids, which are important traits defining the quality of almond flour for specific uses in the food industry. These results have applications both in the research laboratory and the food industry, where NIRS is becoming a widely used technique for quality control.     

Influence of pH cycling and mechanical loading on the resin-dentin microtensile bond strength

The durability of adhesive interfaces is still a problem in adhesive restorations in dentistry. Laboratorial ageing methods have been proposed to predict the performance of materials, but they still require standardization. The objective of this study was to evaluate the resin-dentin microtensile bond strength of composite restorations subjected to pH cycling and different levels of mechanical loading. Resin blocks were built over a flat superficial dentin of bovine incisors (n = 40), using a three-step adhesive system. Half of the specimens were submitted to 10 cycles of pH cycling, followed by mechanical loading (0, 500,000; 1,000,000; 2,000,000 cycles – 98 N, 4 Hz). The other half was directly subjected to mechanical loading. After ageing, all groups were subjected to a microtensile bond test. Data were analyzed using two-way ANOVA and Tukey’s test (α = 0.05). The frequency of the early de-bonding was compared using the Chi-square test (α = 0.05). The statistical analysis revealed that the cross-product interaction ‘pH cycling’ vs. ‘number of mechanical loading cycles’ (p = 0.72) as well as the main factor ‘pH cycling’ (p = 0.49) was not statistically significant, and they were not able to reduce the resin–dentin bond strength values. Regarding the number of mechanical loading cycles, the groups subjected to 2,000,000 cycles showed lower bond strength values than the others (p = 0.003). The frequency of debonded specimens increased with mechanical loading. Therefore, it can be concluded that in this restorative model, at least 2,000,000 mechanical cycles are need to decrease the microtensile strength and simulate the ageing of the interface.     

Synthesis and characterization of polyurethane/titanium dioxide nanocomposites obtained by in situ polymerization

The development of new polymeric and polymeric based materials is fundamental to meet the market demands. This work aims the synthesis and characterization of polyurethane/titanium dioxide nanocomposite, using low cost commercial raw materials. Nanocomposites were synthesized by in situ polymerization reactions in which titanium dioxide were added in the following proportions, by weight, in relation to the mass obtained from the pure polymer: 0.5, 1.0, 2.0, 3.0, 5.0, 7.0, and 10.0 %. These reactions were based in poli (ε-caprolactone) and 1,6-diisocyanatohexane. The materials were characterized by infrared spectroscopy Fourier transform, scanning electron microscopy, differential scanning calorimetry analysis, thermogravimetric analysis, dynamic mechanical thermal analysis, and UV–Vis spectroscopy. Based on the obtained results it was concluded that the nanocomposites synthesized by in situ polymerization presented, in general, thermal properties (degradation temperature) and mechanical properties higher than the pure polymer.     

Validation of a UV Spectrophotometric Method for Determination of Proteolytic Activity of Enzymatic Detergents

Enzymatic detergents are widely used in health services. These products should be controlled to ensure their activity. In this paper, a UV spectrophotometric method for the determination of proteolytic activity in enzymatic detergents was validated. An artificial substrate (azocasein) was used to quantify the enzyme activity at 340 nm. The results showed that the method was satisfactory in respect to its specificity, linearity, precision, accuracy and robustness. This method fulfills both ICH’s and Brazilian criteria, demonstrating its suitability for routine analysis as well as its potential application for regulatory purposes.     

Variability of Phytosterols in Jatropha curcas Germplasm

Jatropha curcas L. has great potential for biofuel and phytosterol production. The objective of this research was to evaluate G × E variability for kernel phytosterol content and composition in Jatropha germplasm. Freshly matured seeds from 21 accessions grown in Málaga, Spain were collected at two stages of development. Significant genetic variation was detected for total kernel phytosterol content, which ranged from 2,246 to 2,883 mg kg^?1; and stigmasterol concentration, which ranged from 7.6 to 11.5 % of the total phytosterols. An accession with 9.2 % Δ⁵‐avenasterol was also identified. The coefficient of variation for kernel phytosterol content and stigmasterol concentration was 6.2 and 14.0 % respectively between accessions and 7.2 and 10.2 % respectively within accessions. Accordingly, evaluation of plant to plant variation is advisable. The existence of variability for kernel phytosterol content and composition in Jatropha will enable breeding for enhanced levels of these compounds.     

The Efficacy of the Quorum Sensing Inhibitor FS8 and Tigecycline in Preventing Prosthesis Biofilm in an Animal Model of Staphylococcal Infection

We investigated the efficacy of tigecycline and FS8, alone or combined, in preventing prosthesis biofilm in a rat model of staphylococcal vascular graft infection. Graft infections were established in the back subcutaneous tissue of adult male Wistar rats by implantation of Dacron prostheses followed by topical inoculation with 2 × 10⁷ colony-forming units of Staphylococcus aureus, strain Smith diffuse. The study included a control group, a contaminated group that did not receive any antibiotic prophylaxis, and three contaminated groups that received: (i) intraperitoneal tigecycline, (ii) FS8-soaked graft, and (iii) tigecycline plus FS8-soaked graft, respectively. Each group included 15 animals. The infection burden was evaluated by using sonication and quantitative agar culture. Moreover, an in vitro binding-study was performed to quantify the how much FS8 was coated to the surface of the prosthesis. Tigecycline, combined with FS8, against the adherent bacteria showed MICs (2.00 mg/L) and MBCs (4.00 mg/L) four-fold lower with respect to tigecycline alone in in vitro studies. The rat groups treated with tigecycline showed the lowest bacterial numbers (4.4 × 10⁴ ± 1.2 × 10⁴ CFU/mL). The FS8-treated group showed a good activity and significant differences compared to control group with bacterial numbers of 6.8 × 10⁴ ± 2.0 × 10⁴ CFU/mL. A stronger inhibition of bacterial growth was observed in rats treated with a combined FS8 and tigecycline therapy than in those that were singly treated with bacterial numbers of 10¹ CFU/mL graft. In conclusion, the ability to affect biofilm formation as well, its property to be an antibiotic enhancer suggests FS8 as alternative or additional agent to use in conjunction with conventional antimicrobial for prevention of staphylococcal biofilm related infection.     

Fungal fucoidanase production by solid-state fermentation in a rotating drum bioreactor using algal biomass as substrate

Fucoidanase enzymes able to degrade fucoidan were produced by solid-state fermentation (SSF). The fermentation assays were initially carried out in a laboratory-scale rotating drum bioreactor, and two fungal strains (Aspergillus niger PSH and Mucor sp. 3P) and three algal substrates (untreated, autohydrolyzed, and microwave processed seaweed Fucus vesiculosus) were evaluated. Additionally, fermentations were carried out under rotational (10 rpm) and static conditions in order to determine the effect of the agitation on the enzyme production. Agitated experiments showed advantages in the induction of the enzyme when compared to the static ones. The conditions that promoted the maximum fucoidanase activity (3.82 U L^?1) consisted in using Mucor sp. 3P as fungal strain, autohydrolyzed alga as substrate, and the rotational system. Such conditions were subsequently used in a 10 times larger scale rotating drum bioreactor. In this step, the effect of controlling the substrate moisture during the enzyme production by SSF was investigated. Moreover, assays combining the algal substrate with an inert support (synthetic fiber) were also carried out. Fermentation of the autohydrolyzed alga with the moisture content maintained at 80% during the fermentation with Mucor sp. 3P gave the highest enzyme activity (9.62 U L^?1).     

From Molecules to Behavior in Long-Term Inorganic Mercury Intoxication: Unraveling Proteomic Features in Cerebellar Neurodegeneration of Rats

Mercury is a severe environmental pollutant with neurotoxic effects, especially when exposed for long periods. Although there are several evidences regarding mercury toxicity, little is known about inorganic mercury (IHg) species and cerebellum, one of the main targets of mercury associated with the neurological symptomatology of mercurial poisoning. Besides that, the global proteomic profile assessment is a valuable tool to screen possible biomarkers and elucidate molecular targets of mercury neurotoxicity; however, the literature is still scarce. Thus, this study aimed to investigate the effects of long-term exposure to IHg in adult rats’ cerebellum and explore the modulation of the cerebellar proteome associated with biochemical and functional outcomes, providing evidence, in a translational perspective, of new mercury toxicity targets and possible biomarkers. Fifty-four adult rats were exposed to 0.375 mg/kg of HgCl₂ or distilled water for 45 days using intragastric gavage. Then, the motor functions were evaluated by rotarod and inclined plane. The cerebellum was collected to quantify mercury levels, to assess the antioxidant activity against peroxyl radicals (ACAPs), the lipid peroxidation (LPO), the proteomic profile, the cell death nature by cytotoxicity and apoptosis, and the Purkinje cells density. The IHg exposure increased mercury levels in the cerebellum, reducing ACAP and increasing LPO. The proteomic approach revealed a total 419 proteins with different statuses of regulation, associated with different biological processes, such as synaptic signaling, energy metabolism and nervous system development, e.g., all these molecular changes are associated with increased cytotoxicity and apoptosis, with a neurodegenerative pattern on Purkinje cells layer and poor motor coordination and balance. In conclusion, all these findings feature a neurodegenerative process triggered by IHg in the cerebellum that culminated into motor functions deficits, which are associated with several molecular features and may be related to the clinical outcomes of people exposed to the toxicant.