Fatigue life assessment of welded joints under sequences of bending and torsion loading blocks of different lengths

In this work, the nominal stress concept, the notch stress approach and two critical plane approaches are used to analyse the fatigue endurance of a pipe‐to‐plate welded joint subjected to complex loading histories. Both the pipe and the plate were made of S355JR steel. Starting from already known fatigue endurance curves obtained for the same specimens under pure bending and pure torsion, a first series of tests was conducted, in which specimens were loaded in bending for a given fraction of the estimated life and then in torsion until failure. A similar series of tests was then carried out by changing the loading order: specimens were firstly loaded in torsion for a given fraction of the estimated endurance and then in bending until failure. The whole test campaign was repeated for two different fractions of the estimated life, that is, 0.3 and 0.45, respectively. After that, additional three series of tests were carried out, in which the specimens were subjected to consecutive sequences of bending and torsion blocks of different lengths (short, medium and long, respectively); the relative length of the bending and torsion block in each series was determined in order to produce the same damage. The experimental results, in terms of total damage at failure, were analysed using the Palmgren–Miner hypothesis. For all the assessment methods, the characteristic endurance curves were firstly calibrated on the basis of finite element (FE) analyses and of the experimental results obtained under pure bending and pure torsion loadings. The observed damage at failure resulted always greater than 0.5 for all the employed methods and greater than 1 for most of the tests. The different methods gave similar results, with the critical plane methods giving a slightly more stable damage at failure and a correct determination of the failure location. For all the methods, the damage at failure slightly reduces as the block length shortens.     

A systematic approach to improve multiple Lyapunov function stability and stabilization conditions for fuzzy systems

This paper presents a systematic approach for decreasing conservativeness in stability analysis and control design for Takagi-Sugeno (TS) systems. This approach is based on the idea of multiple Lyapunov functions together with simple techniques for introducing slack matrices. Unlike some previous approaches based on multiple Lyapunov functions, both the stability and the stabilization conditions are written as linear matrix inequality (LMI) problems. The proposed approach reduces the number of inequalities and guarantees extra degrees of freedom to the LMI problems. Numeric examples illustrate the effectiveness of this method.     

Interference minimisation by autocorrelation shaping inasynchronous DS-CDMA systems: chaos-based spreading is nearly optimal

The classical estimation of co-channel interference in asynchronous direct sequence-code division multiple access (DS-CDMA) systems, obtained for a conventional receiver under the standard Gaussian approximation (SGA), is analytically minimised with respect to the auto-correlation function of spreading sequences. The optimum auto-correlation function is found to be real, with alternating signs, and extremely closely follows an exponential trend. A family of chaotic maps is presented which is able to generate sequences with exponential auto-correlation function with alternating signs. The resulting DS-CDMA system is an extremely good approximation of the optimum achievable system     

Modeling retention and selectivity as a function of pH and column temperature in liquid chromatography

In reversed-phase liquid chromatography (RPLC), the retention of weak acids and bases is a sigmoidal function of the mobile-phase pH. Therefore, pH is a key chromatographic variable to optimize retention and selectivity. Furthermore, at an eluent pH close to the pKa of the solute, the dependence of ionization of the buffer and solute on temperature can be used to improve chromatographic separations involving ionizable solutes by an adequate handling of column temperature. In this paper, we derive a general equation for the prediction of the retentive behavior of ionizable compounds upon simultaneous changes in mobile-phase pH and column temperature. Four experiments, two limiting pH values and two temperatures, provide the input data that allow predictions in the whole range of these two variables, based on the thermodynamic fundamentals of the involved equilibria. Also, the study demonstrates the significant role that the choice of the buffer compound would have on selectivity factors in RPLC at temperatures higher than 25 degrees C.     

Degradation of phenol using Co- and Co,F-doped PbO(2) anodes in electrochemical filter-press cells

A comparative study on the electrooxidation of phenol in H(2)SO(4) medium using pure PbO(2) or F-, Co- and Co,F-doped PbO(2) electrodes in filter-press cells was carried out. The oxide films were obtained by galvanostatic electrodeposition using an electrolytic bath containing sodium lauryl sulfate as additive and Pb(2+), F(-), Co(2+) or Co(2+)+F(-), under magnetic stirring (to obtain 4-cm(2) electrodes) or ultrasound waves (to obtain 63-cm(2) electrodes). The best results were attained with PbO(2) electrodes doped with a low-Co content (1mM Co(2+) in the electrolytic bath) along with F(-): the chemical oxygen demand (COD) and the total organic carbon content (TOC) of the simulated wastewaters were removed by about 75% and 50%, respectively. When pure PbO(2) electrodes were used, the COD and TOC removals were about 60% and 45%, respectively. For the smaller electrodes, an average current efficiency (ACE) and an energy consumption (EC) of about 16% and 70 kWh kg(COD)(-1), respectively, were obtained. For the larger electrodes, the ACE and EC values were about 18% and 105 kWh kg(COD)(-1), respectively. Stability tests of the electrodes showed that they are suitable for use in the electrochemical treatment of phenol wastewaters.     

Formulation of muds for pelotherapy: effects of “maturation” by different mineral waters

Spa centres in northern Italy use clayey admixtures for the formulation of muds to be used in pelotherapy. The basic ingredient (“virgin” clay) is a dressed bentonitic geomaterial with mineralogical composition: smectite 60–70%, illite 5–10%, kaolinite 10–15%, quartz 5–10%, calcite 5–10% and feldspars 2–3%.The peloid muds are obtained by “maturation” of the virgin clay with mineral waters gushing out in situ which have different geochemistry: sulphureous, Ca-sulphate, Ca–Mg-sulphate and Br–I-salty (after the Italian regulation DPR 105/92). The maturation treatment is varying with respect to the mixing procedure and lasting time.Peculiar parameters have been tested to verify the effects of various maturation treatments, i.e., changes with respect to virgin clay.Formation of organic matter is due to the presence of microorganisms and algae in the maturation habitat. The <2 μm fraction is generally decreased due to clay particles agglomeration. Mineralogical changes are mainly concerning the degradation of clay minerals, as smectite and illite, and subordinately to the dissolution of calcite. Cation exchange capacity (CEC), soluble salts, water retention, swelling index, activity, consistency parameters (WL, WP and PI), thermal behaviour and cooling kinetics are influenced by the geochemistry of mineral waters used for the maturation treatments but with some opposite trends for Br–I-salty water, and for sulphureous and Ca-sulphate waters, respectively.Noteworthy was the influence of high-pH value of the virgin clay on the pH of peloid muds (in fact, the pH of the used mineral waters is ranging around the natural value). Furthermore, the temperature reached by the peloid muds after 20 min of application (calculated after an innovative mathematical model) is influenced by water retention. An increase in plasticity index and a slower cooling are considered to improve the quality of the obtained peloid muds for pelotherapy.The observed different cation exchange behaviour and soluble salt content could be discriminant for either dermatological masks or thermal body cataplasms.A need of regulation (standard procedures) is suggested to certificate the clay geomaterials suitable for pelotherapy and also for drugs formulation.     

Aromatization of heptanes,ethylcyclopentane, and cycloheptane over “nonacidic” platinum-alumina catalyst. Comparison of the mechanisms of aromatization over chromia-alumina and over platinum-alumina catalysts

n-Heptane, 2- and 3-methylhexane, ethylcyclopentane, and cycloheptane were passed in the presence of hydrogen at 500 °C over “nonacidic” platinum-alumina catalyst containing 3% by weight of platinum. The conversion ranged between 12 and 26%, depending on the interval of time the product was removed for analysis. In the case of cycloheptane, however, the conversion amounted to 98% during the first 30 min on stream and with time, during the approximate period between 2 and 3 h, it decreased to 69%. The products from the reaction contained besides toluene, also hydrocarbons resulting from a skeletal isomerization and dehydrocyclization of the original hydrocarbons, and to a smaller extent from a bond shift process, and a repetitive 1,5-ring closure followed by hydrogenolysis. Using 1,1-dimethylcyclohexane as a model compound, it was shown that the skeletal isomerization accompanying the aromatization of the seven-carbon hydrocarbons does not proceed through cationic intermediates. A survey of the literature relating to the mechanism of aromatization of hydrocarbon over “nonacidic” chromia-alumina and platinum-alumina catalysts is presented, and the differences between the two mechanisms are discussed.     

A Pharmacogenetics Study in Mozambican Patients Treated with Nevirapine: Full Resequencing of TRAF3IP2 Gene Shows a Novel Association with SJS/TEN Susceptibility

Steven–Johnson Syndrome (SJS) and Toxic Epidermal Necrolysis (TEN) are severe adverse drug reactions, characterized by extensive epidermal detachment and erosions of mucous membrane. SJS/TEN is one of the most serious adverse reactions to Nevirapine (NVP) treatment, commonly used in developing countries as first-line treatment of human immunodeficiency virus infection. In the last years TRAF3IP2 gene variants had been described as associated with susceptibility to several diseases such as psoriasis and psoriatic arthritis. We hypothesized that this gene, involved in immune response and in NF-κB activation, could also be implicated in the SJS/TEN susceptibility. We performed a full resequencing of TRAF3IP2 gene in a population of patients treated with NVP. Twenty-seven patients with NVP-induced SJS/TEN and 78 controls, all from Mozambique, were enrolled. We identified eight exonic and three intronic already described variants. The case/control association analysis highlighted an association between the rs76228616 SNP in exon 2 and the SJS/TEN susceptibility. In particular, the variant allele (C) resulted significantly associated with a higher risk to develop SJS/TEN (p = 0.012 and OR = 3.65 (95% CI 1.33–10.01)). A multivariate analysis by logistic regression confirmed its significant contribution (p = 0.027, OR = 4.39 (95% CI 1.19–16.23)). In conclusion, our study suggests that a variant in TRAF3IP2 gene could be involved in susceptibility to SJS/TEN.     

Characterization of Jatropha curcas oils and their derived fatty acid ethyl esters obtained from two different plantations in Cuba

The scope of this work is to evaluate some properties of the oils and derived fatty acid ethyl esters (FAEE) from two different Jatropha Curcas species planted in Cuba. The properties that were determined include the acid value, peroxide value, p-anisidine value and fatty acid ethyl esters composition. In order to study the influence of the genus species and geographic conditions on the fuel properties, the oils from Jatropha Curcas planted in two regions of Cuba and their derived FAEE were analyzed and compared. The two plantations were in San José (SJ) and Guantanamo (Gt) representing respectively the western and eastern part of the island.The analyses indicated that the FAEE obtained from Guantanamo has a higher acid value and peroxide value compared with the FAEE from San José. The p-anisidine values did not show a clear trend and the results of gas chromatography-mass spectrometry indicated a similar FAEE composition. The results obtained by gas chromatography are in good agreements with previous reports.