回火过程应力场计算机模拟

回火过程应力场计算机模拟林家骝，杨振枢，于震宗，段贵明（清华大学）郭剑仁，史全兴，谢克仁（内蒙古第一机器厂）ＡＳｔｕｄｙｏｆＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｏｆＳｔｒｅｓｓＦｉｅｌｄｄｕｒｉｎｇＴｅｍｐｅｒｉｎｇ￥ＬｉｎＪｉａｌｉｕ；ＹａｎｇＺ...     

A rheological model for iron oxide suspensions

We have examined the rheological properties of a Co-adsorbed γ-Fe₂O₃ magnetic suspension with polyurethane (PU) as a binder and methyl ethyl ketone (MEK) or cyclohexanone (CH) as a solvent. A Haake RV20 viscometer was used to measure the suspension viscosity and the vane method was adopted to determine the fluid yield stress. A rheological model which can be viewed as a combination of the Casson model and the Bingham model is proposed to describe the suspension viscosity. The effects of temperature, particle content, and binder concentration are included in the model.     

Effects of Stearic Acid on the Injection Molding of Alumina

This research investigated the influence of stearic acid on the injection molding of alumina, by varying the concentration of stearic acid. The interaction between stearic acid and alumina was identified using transmission infrared spectroscopy, indicating stearic acid preferentially adsorbed onto the alumina powder surface. In addition to slightly modifying the intrinsic binder viscosity, stearic acid adsorbed onto the powder surface changed the flow behavior of the mixtures from dilatant flow to pseudoplastic flow at low temperatures. As a result, inhomogeneous distribution of binder in the injection-molded parts was minimized with increased stearic acid concentration. However, the possibility of forming bubbles in the mixtures arising from vaporization of stearic acid was enhanced. Additionally, the binder burnout temperature range was broadened with the increase of stearic acid concentration.     

Gel formation in diimide‐hydrogenated polymers

The hydrogenation of diene‐based polymers via diimide is a very attractive alternative to the conventional catalytic hydrogenation route based on gaseous molecular hydrogen. However, serious crosslinking always accompanies it and limits the end‐use properties of the polymers. Gel formation in polymers that are hydrogenated via diimide has been investigated in detail through an inspection of all the chemical reactions involved in the process. The results indicate that hydrogen peroxide decomposition, some reactions related to oxygen, and the redox reaction between hydrogen peroxide and hydrazine are capable of generating radicals. However, radicals generated in the aqueous phase do not appear to initiate the crosslinking of diene‐based polymers in the latex form. It is proposed that the primary radicals giving rise to crosslinking are generated in the polymer phase in situ, and the step responsible for generating these organic radicals is possibly the diimide disproportionation reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1122–1125, 2005     

High temperature polymerization of propylene catalyzed by MgCl2‐supported Ziegler–Natta catalyst with various cocatalysts

Four cocatalysts, referred to as ethylaluminoxanes, were synthesized by the reaction between triethylaluminium (AIEt₃) and water under various molar ratios of H₂O/Al at ?78°C. Aluminoxanes were used as cocatalysts for a MgCl₂‐supported Ziegler–Natta catalyst for propylene polymerization at temperatures ranging from 70 to 100°C. When the polymerization was activated by AlEt₃, the activity as well as the molecular weight and isotacticity of the resulting polymer gradually dropped as the temperature varied from 70 to 100°C. When ethylaluminoxane was employed as the cocatalyst, good activity and high molecular weight and isotacticity were obtained at 100°C. Furthermore, when the cocatalyst varied from AlEt₃ to ethylaluminoxane, the atactic fraction and polymer fraction with moderate isotacticity decreased and the high isotactic fraction slightly increased, which indicated that the variation of the cocatalyst significantly affects the isospecificity of active sites. It was suggested that the reactivity of the Al‐Et group and the size of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different temperatures. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1978–1982, 2006     

Morphology of conducting polymeric coatings: quantitative comparison between theory and experiment

The density profile of electrosynthesized polymeric layers on carbon fibers is obtained from gravimetric and scanning electron microscopy (SEM) data. The coating density ρ is found to decrease with increasing radial distance, r, subject to the power law . Based on a modified diffusion-limited aggregation (DLA) model, it is shown that lattice Monte Carlo simulation of the coating process predicts the experimentally observed power law exponent.     

Surface Preparation of Tantalum for Encapsulation and Adhesive Bonding

A number of methods of surface preparation of tantalum for encapsulation in silicone rubber and for structural adhesive bonding were explored. The only ones which could be generally useful were boiling for 24 hours in distilled water (28% improvement) or boiling for 4 hours in 20% sodium hydroxide solution followed by boiling for 2 hours in dilute hydrochloric acid (34% improvement). An alternative, which could sometimes be used, was heating in air for at least 2 hours at 100°C.     

Impacts of new technologies on media usage and social behaviour in domestic environments

Technological infrastructure at home is changing continuously and is becoming increasingly interconnected. Media devices, including the TV set, provide access to the Internet and offer manifold opportunities to consume media on demand. Additionally, personal devices, such as smartphones, also enable flexible consumption and sharing of media. Questions about how these technologies change the user's media usage and how these changes affect the social structure of a household, however, remain largely unanswered. In order to gain insight into the adoption of new technologies into daily routines, we explored these changes in respect of people's media usage in a qualitative long-term Living Lab study. We will present findings regarding personal routines, flexible integration of new devices into existing practices, influences on households as social systems and related issues in device access and collective use. We will highlight potentials and conflicts regarding device shifts and roles; restrictions in device access; social influences in the living room; and individual changes in media consumption.     

两步法合成大粒径丁苯胶乳

研究了聚甲基丙烯酸甲酯（MMA）对丁苯（BS）胶乳的附聚作用以增大丁苯胶乳粒径；探讨了无机盐、体系pH值及体系中MMA胶乳与BS胶乳的固含量比（R值）对附聚后丁苯胶乳的粒径及稳定性的影响。结果表明：适当添加无机盐可以稳定胶乳体系，最佳用量（质量分数）为0．1％～0．2％；适当增大体系pH值，可增大胶乳粒径；在附聚过程中，当R值在两个附聚峰附近时，可增大丁苯胶乳的粒径。