基于AFM的微结构加工实验研究

本文建立了微动工作台和原子力显微镜相结合的微加工系统，在该系统上采用金刚石针尖进行微加工实验，与SPI系统本身的刻划软件刻划出的图形进行了比较分析，得出这个系统适合微结构的加工；并给出了采用该方法加工的1111面及多边形面微结构；还分析了金刚石针尖几何角度及SPM和工作台的相关参数对加工的影响。     

正确选择气顶油藏高效开发模式

通过对不同类型气顶油藏的油气水分布特征及气顶和边水能量的研究分析，计算水侵量与边水体积及合理的弹性产率。提出适合气顶油藏特点的开发模式是先开采油区后开采气顶，并以唐家河油田港深18—2断块为例，证明采用该模式可以高效开发气顶油藏。图3表1参6     

电子电路中抗EMI设计

电磁干扰(EMI)可分为传导干扰和辐射干扰,消除干扰的方法可以采用硬件方法和软件方法,硬件方法主要有屏蔽、接地、隔离和滤波等,而软件方法主要是滤波。笔者对各种方法进行总结,并指出各种方法所存在的问题以及适用场合,并对一些常用方法提出改进措施。     

衍射法细丝直径的精密测量

分析了激光衍射法测量细丝直径技术中影响精度的几个主要因素，研究了一种微弱衍射条纹的精密处理及识别技术，有效地提高了测量精度，实测结果表明，文中讨论的技术能在１０￣５０μｍ的范围内实现正负０．１μｍ的重复精度，分辨力优于０．０１μｍ。     

Deformation evolution during initiation of transgranular stress corrosion cracking

Face centered cubic metals and alloys have multiple slip systems and are characterized by high dislocation velocities. Nevertheless, these materials suffer from transgranular stress corrosion cracking (T-SCC), that occurs by environmentally-induced cleavage. Since plasticity precedes fracture in all T-SCC phenomena, the evolution of deformation patterning during T-SCC is an important element of the local microfracture mode. Experimental observations show that the presence of the SCC-causing environment during straining is promoting localized plastic deformation at the near-surface region and producing an entirely different deformation pattern compared with that developing in laboratory air. The deformation evolving in the presence of the SCC electrolyte is highly localized, exhibiting closely spaced, coarse slip bands. The amount of localized strain developing at the near-surface region prior to nucleation of stress corrosion cracks is equivalent to the strain required for ductile fracture of the material in air, suggesting the existence of a fundamental fracture criterion. The above phenomenology of the deformation evolution is considered in relation to T-SCC initiation and propagation. The T-SCC is suggested to be a macroscopically brittle but microscopically ductile fracture occurring by localized plastic flow. An environment-induced deformation localization mechanism is described where the role of the environment involves generation of vacancies and subsequent dislocation nucleation from the near-surface region at loads well below those required for normal yielding. The evolution of the localized deformation pattern during T-SCC is suggested to be an outcome of nonuniformity and periodicity in the dissolution process.Presented at Fourth Greek National Congress on Mechanics, 26–29 June 1995, held at Xanthi, Greece.     

超声波车辆车轴探头的研制与应用

提出了一种用于检测在役车辆车轴产生疲劳裂纹的超声波方法,设计了中心孔探头与斜角探头一起,完成了对车辆车轴的关键区域探伤。     

BEM 系列原油流动性改进剂的应用

对BEM系列原油流动性改进剂的基本原理以及在中洛、濮临、东临、东黄、鲁宁、魏荆等几条原油长输管道工业应用的现场测试情况进行了介绍。结果表明，BEM系列原油流动性改进剂在降低原油凝点和粘度方面性能良好，能满足管道安全，平稳运行的要求。     

DG130/3.82-4型自然循环锅炉水冷壁管爆管技术分析

对水冷壁管同一根、同一区域发生的两起爆管事故进行失效分析 ,研究爆管机理 ,找出了爆管原因 ,提出了预防措施     

用JHS-3胶合砂防粉细砂

针对孤东油田大量油井出现粉细砂甚至粘土砂而严重影响生产的问题,研制了用JHS-3胶合砂防粉细砂方法。介绍了胶合砂的基本配方、主要技术指标及防砂机理。适应性分析结果表明,施工井的层数、处理半径和施工压力升幅3个因素直接影响着胶合砂的防砂堵水效果。现场20井次的应用情况可看出,胶合砂能有效地防住粉细砂和粘土砂,明显地改善产液剖面,并有显著的降水增油效果。     

湿硫化氢环境下的球罐腐蚀状况分析

在湿硫化氢环境下 ,尤其储存介质中的硫化氢含量超标时 ,很容易对储存容器壳体 (含焊缝和母材 )造成硫化氢应力腐蚀或氢鼓包。作者较仔细分析了 1 0 0 0m3 丙烯球罐产生硫化氢应力腐蚀开裂和40 0m3 LPG球罐产生氢鼓包的原因。提出了此类设备在设计选材、设备制造、施工安装和使用维护等环节应注意的问题。