全媒体时代新闻学专业实践教学模式的研究

全媒体时代,需要全媒体型新闻传播人才。新闻学专业教育者,要顺应时代要求,转变教育、教学观念,不断探索教学模式,加大实践教学内容比重,使课堂理论知识和实践教学环节相融合。营造多层次的实践平台,注重单项实践与综合实训相结合,增加"双师型"的教师比例,提高实践教学质量。     

以品牌专业建设为契机 抓住发展机遇 全面提高专业建设质量

专业建设是高等学校最重要的教学基本建设,是教育教学工作的基础和重要生命线,是高等学校人才培养的重要依托。加强本科品牌专业的建设可提升学校本科专业建设的整体水平,提高学校本科人才培养质量、效益和竞争力。文章围绕如何开展品牌专业建设,结合学校实际,着重从品牌专业内涵、建设原则、内容和评价办法等方面进行了阐述。     

介质阻挡放电反应器降解邻二甲苯的特性研究

采用介质阻挡放电(DBD)降解常压下流动态的邻二甲苯模拟废气,系统地考察了放电极值电压,气体的初始质量浓度、停留时间以及相对湿度等工艺参数对邻二甲苯降解的影响,并初步探讨了邻二甲苯的降解产物.实验研究结果表明:在7.0kV的放电极间电压下,邻二甲苯的初始质量浓度为1 500mg/m3,停留时间为9s,其去除率可达到80%以上.降解产物主要为CO2、H2O以及苯甲酸、苯乙酸、苯乙醛等有机物,并且经降解后产物的生物可生化性得到提高,因而为后续的等离子-生物法联合处理VOCs提供了依据.     

基于MSP430单片机的灾害性天气预警管理系统设计

设计了基于MSP430单片机的灾害性天气预警管理系统,针对常见的雨量、风速及温度自然因素实现实时的监测,并对数据进行分析和处理,设置出相应的警报等级,并能根据警报的等级控制相应的三路设备。     

新颖的绕线拉紧装置

本文介绍一种新型适用的线圈绕制中的线材拉紧装置，并将其与传统的拉紧装置进行比较，得出各自的优缺点。     

Temperature stability and fracture toughness of Nd-Fe-B magnets

Temperature stability and toughness of magnets are very important properties especially for application in motor. In this paper, it is found that temperature stability and toughness of magnets are improved when Fe is substituted with Co andheavy rare earth is substituted for Nd in part and suitable rich B grain-boundary phase is added. In addition, heavy rare earth substitution decreases the remanence temperature coefficient greatly, but has a little effect on Curie temperature of the magnets, which is beneficial to Nd-Fe-B magnets for the application in motor.     

中厚板在线30通道超声波探伤方法及应用

介绍了柳钢公司在生产锅炉板、压力容器板过程中，曾试用了６种探伤方法；而研制的３０通道在线超声波探伤法不仅可满足国家标准要求，而且能适应生产节奏，并具有快速、准确、简便的特点。     

Sr对高铁Al-Si合金组织和性能的影响

研究了Sr元素（加入量分别为0．03％、0．06％、0．09％、0．12％和0．18％）对含Fe量为1．2％的ZL102合金的组织和性能的影响。研究发现，随着Sr元素的加入，合金中粗大的针状Fe相开始出现断裂分叉现象，同时针状Fe相的长度也随Sr元素加入量的增加而减小，但Sr对Fe相的针状形貌没有明显改变。随着Sr元素加入量逐渐增加，合金的抗拉强度和伸长率均呈现出先增后减的变化趋势。当Sr元素加入量达到0．12％时，合金材料的综合力学性能最佳。     

国外小电流空气等离子弧切割技术的发展

本文就小电流空气等离子弧切割工艺的特性、切割质量、切割设备、存在问题和应用情况作了综合介绍。当工作气体含氧量为20％时,切割速度急剧增加,大大优于气割。     

Performance of positive and negative electrodes in amorphous manganese oxide supercapacitor

Using potassium permanganate and acetic manganese as the reactants, amorphous manganese oxide was prepared with mechanochemical method. XRD was used for microstructure characterization, while cyclic voltammetry and constant current charge-discharge were used for electrochemical performance testing. The positive electrode （PE） and negative electrode （NE） were investigated respectively in amorphous manganese oxide supercapacitor, aiming to find their different performances in charging-discharging. The results show that the crystalline structure is destroyed in both the PE and NE material during charge-discharge process. Thereinto, the NE suffers a bit more seriously. When cycling, the PE potential scope diminishes while the NE potential scope enlarges. The increased inner resistance makes the NE curves almost bended to be a right angle, but not the PE curves. The cell＇s equivalent series resistance （ESR） is more dependent on the NE, and the capacitance is mainly determined by the rapid descent of the NE potential range. The capacitances of the NE are highly rate-dependent, decreasing from 121.3 to 53.1 F/g, by 56.2%, over the range of 5-25 mV/s. However, the PE appears to be weakly dependent and its capacitance is only dropped by 22.1%.