Effect of zone drawing on the structure and properties of melt‐spun poly(trimethylene terephthalate) fiber

Melt‐spun poly(trimethylene terephthalate) (PTT) fibers were zone‐drawn and the structures and properties of the fibers were investigated in consideration of the spinning and zone‐drawing conditions. The draw ratio increased up to 4 with increasing drawing temperature to 180°C, at a maximum drawing stress of 220 MPa. Higher take‐up velocity gave lower drawability of the fiber. The PTT fiber taken up at 4000 rpm was hardly drawn, in spite of using maximum drawing stress, because a high degree of orientation had been achieved in the spinning procedure. However, an additional enhancement of birefringence was observed, indicating a further orientation of PTT molecules by zone drawing. The exotherm peak at 60°C disappeared and was shifted to a lower temperature with an increase in the take‐up velocity, which means that the orientation and crystallinity of the fiber increased. The d‐spacing of (002) plane increased with increasing take‐up velocity and draw ratio, whereas those of (010) and (001) planes decreased. In all cases, the crystal size increased with take‐up velocity and draw ratio. The cold‐drawn PTT fiber revealed a kink band structure, which disappeared as the drawing temperature was raised. The physical properties of zone‐drawn PTT fibers were improved as the draw ratio and take‐up velocity increased. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3471–3480, 2001     

棒形喷淋器的设计及应用

随着化学清洗范围的不断扩大，喷淋清洗技术在各类贮罐的清洗中得到了大量应用。针对一次圆顶贮罐的清洗，设计出了一种棒形喷淋器并取得满意的效果     

延长油田低渗透油藏二氧化碳驱油影响因素室内实验研究

针对延长油田低渗透油藏,通过开展岩心注气物理模拟实验,探索提高低渗透油藏CO2驱油开发效果影响因素及其规律。实验表明,不同驱替压力下,注入压力越高,采收率越高,注入压力高于最小混相压力后,采收率不再增加,采收率最高可达66.68%;并且注入压力增加,气体突破时间延迟;注入速度越高,采收率和换油率越高,CO2驱油开发效果越好,生产汽油比也越高;岩心渗透率高于1.26×10-3μm2时,渗透率增大,采收率差别不大,但相比水驱,采收率提高程度较大;岩心渗透率低于1.26×10-3μm2时,渗透率增大,采收率增大,但相比水驱,采收率提高程度较小。     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

碳材料复合橡胶研究进展

综述了各种碳材料复合橡胶的发展及研究进程,主要介绍了石墨烯、氧化石墨烯、碳纳米管等碳系材料结构、功能化方式及橡胶复合材料加工方法,得出各种碳材料不仅能较大改善橡胶的各种基础性能,而且赋予了橡胶很多新的功能,比如热量传导、电荷传输,因而能够提高橡胶产品性价比和档次。     

Effects of surfactants on rheological properties of a dispersed viscoelastic microsphere

The swelling ratio is an important performance for the application of viscoelastic microsphere. The reduction of swelling ratio can affect the particle size. The compatibility between particle size and formation pore can affect the plugging performance and EOR capability. Adsorption characteristics of cationic surfactant cetyltriethylammnonium bromide (CTAB), anionic surfactant petroleum sulfonate applied in GangXi oilfield (GXPS), and nonionic surfactant nonylphenol ether (TX‐10) onto viscoelastic microspheres and the effect of the three types of surfactant on swelling ratio of viscoelastic microspheres were investigated. Effects of surfactants on rheological properties of viscoelastic microspheres were researched in two different modes referring to steady shear and dynamic shear, respectively, using Physica MCR301 Rheometer. The results showed that the interactions between viscoelastic microsphere and surfactants CTAB were electrostatic attraction and hydrophobic association, that the interaction between viscoelastic microsphere and surfactants TX‐10 was just hydrophobic association, and that the interactions between viscoelastic microsphere and GXPS were electrostatic repulsion and hydrophobic association. At the same initial surfactant concentration, all these three types of surfactant could be adsorbed onto the surface of viscoelastic microspheres and reduce its swelling ratio and storage modulus. Because of different amount of adsorption, the extent of reduction order on swelling ratio and storage modulus was CTAB>TX‐10>GXPS. In addition, the yield stress of viscoelastic microspheres which was obtained from modeling the data to Herschel‐Bulkley model decreases with the increase of surfactant adsorption. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42278.     

Influences of pre‐ordered melt structures on the crystallization behavior and polymorphic composition of β‐nucleated isotactic polypropylene with different stereo‐defect distribution

As part of continuous efforts to understand the surprising synergetic effect between β‐nucleating agent and pre‐ordered structures of isotactic polypropylene (iPP) in significant enhancement of β‐crystallization (Ordered Structure Effect, OSE), two β‐nucleated iPP with different uniformities of stereo‐defect distribution (WPP‐A and WPP‐B) were prepared, their crystallization behaviors with variation of melt structures were studied in detail. The results revealed that β‐phase can hardly form in WPP‐A (whose stereo‐defect distribution is less uniform) because of its strong tendency of α‐nucleation caused by its less uniform stereo‐defect distribution, while WPP‐B is more favorable for β‐crystallization; As fusion temperature decreases, similar variation trends of crystallization temperature and β‐phase proportion can be observed from WPP‐A and WPP‐B, indicating the occurrence of OSE behavior, which provides unsurpassed β‐nucleation efficiency and induces β‐crystallization even in WPP‐A which is less favorable for β‐crystallization; moreover, the upper and lower limiting temperatures of Region II of WPP‐A and WPP‐B are identical, suggesting the uniformity of stereo‐defect distribution has little influence on temperature window for OSE (denoted as Region II). To explore the physical nature of Region II, self‐nucleation behavior and equilibrium melting temperature of PP‐A and PP‐B were studied. The lower limiting temperatures of exclusive self‐nucleation domain of both PP‐A and PP‐B are identical with the lower limiting temperatures of Region II in OSE (168°C); moreover, the T_m⁰ of both PP‐A and PP‐B are close to their upper limiting temperatures of Region II in OSE behavior (189°C). The possible explanation was proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42632.     

Orthorhombic‐pseudocubic phase transition and piezoelectric properties of (Na0.5K0.5)(Nb1−xSbx)‐SrZrO3 ceramics

0.96(Na_0.5K_0.5)(Nb_1?xSb_x)‐0.04SrZrO₃ ceramics with 0.0≤x≤0.06 were well sintered at 1060°C for 6 hours without a secondary phase. Orthorhombic‐tetragonal transition temperature (T_O‐T) and Curie temperature (T_C) decreased with the addition of Sb₂O₅. The decrease in T_C was considerable compared to that in T_O‐T, and thus the tetragonal phase zone disappeared when x exceeded 0.03. Therefore, a broad peak for orthorhombic‐pseudocubic transition as opposed to that for orthorhombic‐tetragonal transition appeared at 115°C‐78.2°C for specimens with 0.04≤x≤0.06. An orthorhombic structure was observed for specimens with x≤0.03. However, the polymorphic phase boundary structure containing orthorhombic and pseudocubic structures was formed for the specimens 0.04≤x≤0.06. Furthermore, a specimen with x=0.055 exhibited a large piezoelectric strain constant of 325 pC/N, indicating that the coexistence of orthorhombic and pseudocubic structures could improve the piezoelectric properties of (Na_0.5K_0.5)NbO₃‐based lead‐free piezoelectric ceramics.     

Nanofiber‐Based Hydrocolloid from Colloid Electrospinning Toward Next Generation Wound Dressing

Nanofiber‐based hydrocolloid scaffold is prepared by colloid electrospinning of thermoplastic polyurethane (TPU)/sodium carboxymethyl cellulose (S.CMC) in tetrahydrofuran (THF)/dimethylformamide (DMF). The most suitable process of electrospinning for successful formation of fibers is investigated by controlling the concentration of polymeric solution and co‐solvent ratio. In order to accomplish high wettability, the amount of colloid (S.CMC) and the co‐solvent ratio (THF/DMF), which affects the morphology of fibers, are adjusted. Finally, the open wound healing effect is confirmed using nanofiber‐hydrocolloid from in vivo animal studies. A detailed study of the wound healing process is also demonstrated for the first time.

     

Structure and mechanical properties of multi‐hollowed fibers produced by CO2 laser irradiated neck drawing

Multi‐hollowed fibers with a hollowness ratio of over 20% were successfully produced using a neck‐drawing technique accompanied by CO₂ laser irradiation on unoriented and amorphous polytrimethylene terephthalate (PTT) fibers with diameters of approximately 104 µm. The structure and mechanical properties of the multi‐hollowed fibers were characterized using scanning electron microscopy, wide angle X‐ray diffraction (WAXD), birefringence measurements, and tensile tests. Crystal orientation factors in the direction normal to the (010) and (002) planes, which were obtained from WAXD patterns, were lower in comparison to values obtained in previous studies on fibers that did not feature these hollows [9] because of the development of these internal hollows. The PTT fibers in this study also displayed high toughness, about 465 MPa (3.5 cN/dtex) strength and about 40% elongation, and had excellent elastic recovery (>95%) after 10 stretch cycles. POLYM. ENG. SCI., 56:609–616, 2016. © 2015 Society of Plastics Engineers