Engineering practice and economic analysis of ozone oxidation wet denitrification technology

SO₂ and NO emitted from coal-fired power plants have caused serious air pollution in China. In this study, a test system for NO oxidation using O₃ is established. The basic characteristics of NO oxidation and products forms are studied. A separate test system for the combined removal of SO₂ and NO_x is also established, and the absorption characteristics of NO_x are studied. The characteristics of NO oxidation and NO_x absorption were verified in a 35 t·h^-1 industrial boiler wet combined desulfurization and denitrification project. The operating economy of ozone oxidation wet denitrification technology is analyzed. The results show that O₃ has a high rate and strong selectivity for NO oxidation. When O₃ is insufficient, the primary oxidation product is NO₂. When O₃ is present in excess, NO₂ continues to get oxidized to N₂O₅ or NO₃. The removal efficiency of NO₂ in alkaline absorption system is low (only about 15%). NO_x removal efficiency can be improved by oxidizing NO_x to N₂O₅ or NO₃ by increasing ozone ratio. When the molar ratio of O₃/NO is 1.77, the NO_x removal efficiency reaches 90.3%, while the operating cost of removing NO_x per kilogram is 6.06 USD (NO₂).     

Importance of Low-Temperature Melt-Mixing on the Construction of Stereocomplex Crystallites with Superior Nucleation Efficiency in Asymmetric Poly(l-lactide)/Poly(d-lactide) Blends

The nucleation efficiency (NE) of stereocomplex crystallites (SCs) formed in asymmetric poly(L-lactide)/poly(D-lactide) (PLLA/PDLA) blends is generally unsatisfactory because the competition between stereocomplexation and chain mixing involved in the melt-mixing process can cause low formation efficiency and even severe aggregation of SCs. Herein, it is attempted to achieve high-efficient formation of finely dispersed SCs particles by designing a unique melt-mixing procedure, where the mixing of PLLA with 0.75 wt% PDLA is first performed at elevated temperatures (far above the melting temperature of SCs) to allow the homogeneous mixing of PLLA/PDLA chains and then at a low temperature (slightly above that of homocrystallites) to permit the full stereocomplexation of the premixed chains. It is found that the SCs formed in the blends exhibit unexpectedly low NEs (e.g., 54.5%), much inferior to that (73.6%) in the counterpart without undergoing premixing. This is because the introduction of premixing leads to a remarkable deterioration in the amount of SCs particles formed, despite decreased particle size, highlighting that the direct mixing at low temperatures of 170–180 °C (about 20–30 °C lower than that used in common melt-processing of PLA) is more effective for the construction of SCs with superior NE. The mechanisms for these striking findings are discussed.     

Cellular Senescence: Pathogenic Mechanisms in Lung Fibrosis

Pulmonary fibrosis is a chronic and fatal lung disease that significantly impacts the aging population globally. To date, anti-fibrotic, immunosuppressive, and other adjunct therapy demonstrate limited efficacies. Advancing our understanding of the pathogenic mechanisms of lung fibrosis will provide a future path for the cure. Cellular senescence has gained substantial interest in recent decades due to the increased incidence of fibroproliferative lung diseases in the older age group. Furthermore, the pathologic state of cellular senescence that includes maladaptive tissue repair, decreased regeneration, and chronic inflammation resembles key features of progressive lung fibrosis. This review describes regulatory pathways of cellular senescence and discusses the current knowledge on the senescence of critical cellular players of lung fibrosis, including epithelial cells (alveolar type 2 cells, basal cells, etc.), fibroblasts, and immune cells, their phenotypic changes, and the cellular and molecular mechanisms by which these cells contribute to the pathogenesis of pulmonary fibrosis. A few challenges in the field include establishing appropriate in vivo experimental models and identifying senescence-targeted signaling molecules and specific therapies to target senescent cells, known collectively as “senolytic” or “senotherapeutic” agents.     

Multicomponent Bioluminescence Imaging with Naphthylamino Luciferins

Bioluminescent tools have been used for decades to image processes in complex tissues and preclinical models. However, few distinct probes are available to probe multicellular interactions. We and others are addressing this limitation by engineering new luciferases that can selectively process synthetic luciferin analogues. In this work, we explored naphthylamino luciferins as orthogonal bioluminescent probes. Three analogues were prepared using an optimized synthetic route. The luciferins were found to be robust emitters with native luciferase in vitro and in cellulo. We further screened the analogues against libraries of luciferase mutants to identify unique enzyme-substrate pairs. The new probes can be used in conjunction with existing bioluminescent tools for multi-component imaging.     

Preparation and mechanical characteristics of fine-woven cloth and punctured felt preform Cf/C-SiC-ZrC composite

A 3D architecture carbon fiber preform, specifically fine-woven cloth and punctured felt preform, is used to manufacture a novel advanced C_f/C-SiC-ZrC composite. The composite matrix is produced by chemical vapor infiltration (CVI) plus precursor infiltration and pyrolysis (PIP) process and finalized by using a chemical vapor deposition (CVD) of SiC coating to make the final density of the material reach 1.95 g/cm³. The organic precursors of SiC and ZrC have a weight ratio of 4:1 in a xylene solute. The composite mechanical properties, such as tensile, compression, bending, shear, and Z-direction load bearing, are introduced under analysis to find possible applications for the composite. What is more, scanning electron microscope (SEM) images are employed to illustrate the failure behavior of the ceramic composite. The results showed that the punctured filament tows will be beneficial, not only for the composite to withstand compression force up to 308.6 MPa and shear strength to 18.14 MPa but also for the alternatively stacked weave piles and short fiber layers to support the punctured bundles, as well as to hold the composite structure under mechanical forces from different orientations, which is believed to reinforce the ceramic matrix for some high pressure and severe ablation applications.     

钨酸镁催化超声降解金橙Ⅱ研究

采用水热法合成了钨酸镁(MgWO4)半导体催化剂,并使用金橙II为有机污染物模型研究了其声催化降解性能.结果表明:MgWO4具有良好的声催化活性,可显著提升超声对有机污染物的降解效果,而且MgWO4具有优秀的可重复利用性能.同时,MgWO4催化超声降解金橙Ⅱ的机理研究表明,产生的活性物质如羟自由基(·OH)、超氧阴离子自由基(·O2-)和空穴(h+)是声催化降解金橙II的主要原因.以上研究结果表明MgWO4作为声催化剂用于处理有机染料废水具有良好的应用前景.     

掺杂对PZT压电陶瓷的影响及研究进展

在介绍掺杂PZT压电陶瓷材料制备的基础上,总结出生产掺杂PZT材料的最佳掺杂条件,以及配方对压电陶瓷性能的影响,只要工艺合适,性能完全能再提高,对压电陶瓷材料的发展趋势进行了展望。     

Revealing Microstructural,Textural, and Hardness Evolution of Ti–6Al–4V Sheet Cooled From Sub β-Transus Temperature at Different Rates

Metallurgical and Materials Transactions A - A hot-rolled Ti–6Al–4V sheet was annealed at 960 °C (sub β-transus temperature) and then subjected to different coolings [in water...     

Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel

Metallurgical and Materials Transactions A - A cold-rolled low Al-added medium Mn steel was employed to investigate the low-temperature superplastic deformation at a relatively high initial strain...     

高校知识产权保护问题探析

知识产权保护是高校科技发展之本，可以激励科技创新，促进科技成果商品化、产业化。本文分析了当前高校知识产权保护工作中存在的一些问题，针对性地提出了加强高校知识产权保护的措施。