A partial-SOI LDMOSFET with triangular buried-oxide for breakdown voltage improvement

In this paper, a near-triangular buried-oxide partial silicon-on-insulator (TB-PSOI) lateral double-diffused MOS field-effect transistor is proposed. The electric field and electrostatic potential in this structure are modified by the gradual buried-oxide thickness increase. The modification includes the addition of a new peak in the electric field in comparison to that of the conventional PSOI. To assess the efficiency of the proposed structure, its breakdown voltage is compared with that of conventional PSOI using two-dimensional simulations. A comparative study is performed in terms of silicon-film and buried-oxide layer thicknesses, drift region and buried-oxide layer lengths, and drift region doping concentrations. The study shows that under the same drain current, the breakdown voltage of TB-PSOI is nearly two times higher than its PSOI counterpart (108% improvement). Simulation results show that the three-stepped oxide layer closely follows the TB-PSOI structure with a breakdown voltage improvement of 96% compared to that of the PSOI structure.     

Superposition Coding with Unequal Error Protection for the Uplink of Overloaded DS-CDMA System

The overloaded CDMA schemes exploited in direct sequence CDMA (DS-CDMA) systems are mainly to accommodate a greater number of users than the available spreading factor N. In this paper, a superposition coding CDMA (SPC-CDMA) with unequal error protection (UEP) is proposed as one of the overloaded CDMA schemes for the next generation mobile communication systems. It exploits the available power control in most base stations to adapt the transmitted power of active users in the uplink channel. In this scheme, the active users are divided into G groups and each group consists of K users. The K users share the same spreading sequence and are distinguished by different received power levels. At the receiver side, the system first performs despreading for group detection followed by multiuser receiver to estimate the K user signals in each group. It is shown through simulations that better performance are achieved compared to the conventional DS-CDMA and existing overloaded collaborative spreading CDMA (CS-CDMA) schemes, in additive white Gaussian noise (AWGN) and fading channels. Hence, the proposed scheme maximizes the system capacity K-fold compared to conventional DS-CDMA system without requiring extra spreading codes, with average signal to noise ratio (SNR) cost of only 1dB and 2 dB over AWGN and fading channels respectively at BER of 10^?3. On the other hand, for the same N, K and power constraints, SPC-CDMA scheme achieves twofold increase in data rate with 0.7 and 4 dB gains over AWGN and fading channels respectively, compared with overloaded CS-CDMA scheme in the same system capacity. In addition, the proposed scheme can also attain different levels of UEP for different users?? requirements by adjusting their fractions of transmitted powers.     

Photoactive Electrodes Incorporating Electrosprayed Bacterial Reaction Centers

Highly efficient light absorption and charge separation within the photosystem and reaction center (RC) complexes of photosynthetic plants and bacteria are of great interest for solar cell and photo detector applications, since they offer almost unity quantum yield and expected ultimate power conversion efficiencies of more than 18% and 12%, respectively. In addition, the charge separated states created by these protein complexes are very long lived compared to conventional semiconductor solar cells. In this work, a novel technique is presented for the deposition of photosynthetic protein complexes, by electrospraying RCs of Rhodobacter sphaeroides onto highly ordered pyrolytic graphite (HOPG) electrodes. Remarkably, it is shown that the RCs not only survive exposure to the high electric fields but also yield peak photocurrent densities of up to 7 μA cm^?2, which is equal to the highest value reported to date.     

Hybrid Paper–Plastic Microchip for Flexible and High‐Performance Point‐of‐Care Diagnostics

A low‐cost and easy‐to‐fabricate microchip remains a key challenge for the development of true point‐of‐care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper–plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 10² ng mL^?1 for protein biomarkers, 10³ particle per milliliter for virus particles, and 10² copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.     

A noise constrained least mean fourth (NCLMF) adaptive algorithm

The learning speed of an adaptive algorithm can be improved by properly constraining the cost function of the adaptive algorithm. In this work, a noise-constrained least mean fourth (NCLMF) adaptive algorithm is proposed. The NCLMF algorithm is obtained by constraining the cost function of the standard LMF algorithm to the fourth-order moment of the additive noise. The NCLMF algorithm can be seen as a variable step-size LMF algorithm. The main aim of this work is to derive the NCLMF adaptive algorithm, analyze its convergence behavior, and assess its performance in different noise environments. Furthermore, the analysis of the proposed NCLMF algorithm is carried out using the concept of energy conservation. Finally, a number of simulation results are carried out to corroborate the theoretical findings, and as expected, improved performance is obtained through the use of this technique over the traditional LMF algorithm.     

Connection Management Protocols for Dynamic Lightpath Provisioning in Future WDM Networks

This paper investigates and compares the performance of two GMPLS-based distributed control and management protocols for dynamic lightpath provisioning in future IP networks. The first protocol is a global information-based link state approach that consists of both an integrated RWA algorithm and a signaling algorithm. Two triggering mechanisms for the LSAs update procedures are considered; one is periodic-based and the other is threshold-based. The second protocol is a local-information based fixed alternate link routing approach where the signaling protocol is closely integrated with the RWA protocols.     

Interconnecting networks with optimized service provisioning

Telecommunication Systems - A recent trend of peering at geo-diversified Internet exchange points (IXPs) has empowered decades-old proposal of inter-networking and opened up new avenues of business...     

An improved cluster formation process in wireless sensor network to decrease energy consumption

Wireless sensor network has special features and many applications, which have attracted attention of many scientists. High energy consumption of these networks, as a drawback, can be reduced by a hierarchical routing algorithm. The proposed algorithm is based on the Low Energy Adaptive Clustering Hierarchy (LEACH) and Quadrant Cluster based LEACH (Q-LEACH) protocols. To reduce energy consumption and provide a more appropriate coverage, the network was divided into several regions and clusters were formed within each region. In selecting the cluster head (CH) in each round, the amount of residual energy and the distance from the center of each node were calculated by the base station (including the location and residual energy of each node) for all living nodes in each region. In this regard, the node with the largest value had the highest priority to be selected as the CH in each network region. The base station calculates the CH due to the lack of energy constraints and is also responsible for informing it throughout the network, which reduces the load consumption and tasks of nodes in the network. The information transfer steps in this protocol are similar to the LEACH protocol stages. To better evaluate the results, the proposed method was implemented with LEACH LEACH-SWDN, and Q-LEACH protocols using MATLAB software. The results showed better performance of the proposed method in network lifetime, first node death time, and the last node death time.