Air oxidation behavior of nitrogen ion implanted zircaloy-4 at 500 °C

Journal of Materials Science -     

Development of grain boundary allotriomorphic ferrite/granular bainite duplex steel

A new hot-rolled low alloy high strength steel with grain boundary allotriomorphic ferrite/granular bainite duplex micro-structure has been developed through novel microstructure and alloying designs without any noble metal elements such as nickel and molybdenum. Its as-rolled microstructure and mechanical properties, fatigue crack propagation behavior compared with single granular bainitic steel as well as continuous cooling transformation, were investigated in detail. The measured result of CCT (continuous cooling transformation) curve shows that such duplex microstructure can be easily obtained within a wide air-cooling rate range. More importantly, this duplex microstructure has much better combination of toughness and strength than the single granular bainite microstructure. It is found that the grain boundary allotriomorphic ferrite in this duplex microstructure can blunt the rni-crocrack tip, cause fatigue crack propagation route branching and curving, and thus it increases the resistance to fati     

尼龙-11粉末涂料

本文简要地介绍了我国粉末涂料的发展概况，并概述了热固性和热塑性粉末涂料的应用领域．文章重点介绍了尼龙－１１粉末涂料的优点及其制造法，阐述了其在管道防腐、船体防护和建筑行业等领域的应用     

A Multivariate T2 Control Chart for Skewed Populations Using Weighted Standard Deviations

This paper proposes a heuristic method of constructing multivariate T² control charts for skewed populations based on ‘weighted standard deviations’, obtained by decomposing the standard deviation into upper and lower deviations according to the direction and degree of skewness. The proposed method adjusts the variance–covariance matrix of quality characteristics and modifies the ellipsoidal probability density function contour of the multivariate normal distribution to a shape similar to that of the skewed distribution. False alarm rates and out‐of‐control average run lengths of the proposed control chart are compared with those of the standard control chart for multivariate lognormal, Weibull and gamma distributions, and the results show that considerable improvement over the standard method can be achieved when the distribution is skewed. Copyright © 2003 John Wiley & Sons, Ltd.     

Comparison of corrosion behavior of zirconium bombarded with self-ion and molybdenum ion

In order to study the effects of zirconium and molybdenum ion bombardment on the aqueous corrosion behavior of zirconium, one group of specimens was implanted with zirconium ions with ions surface densities ranging from 1 × 10¹⁵ to 2 × 10¹⁷ ions/cm² at about 170 °C, using a metal vapor vacuum arc (MEVVA) source operated at an extraction voltage of 50 kV. The other group of specimens was bombarded with molybdenum ion with ions surface densities ranging from 1 × 10¹⁶ to 5 × 10¹⁷ ions/cm² at about 160 °C, using a MEVVA source operated at an extraction voltage of 40 kV. The valence states and depth distribution of elements in the surface of the samples were analyzed by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES), respectively. Polarization curves measurement was employed to evaluate the aqueous corrosion resistance of the zirconium samples in a 1N H₂SO₄ solution. It was found that the aqueous corrosion resistance of zirconium implanted with 5 × 10¹⁶ Zr ions/cm² is the best in first group samples. For molybdenum ion implantation, the aqueous corrosion resistance of samples declined with raising ions surface densities. The natural corrosion potentials of zirconium samples bombarded with self-ions are more negative than that of the as-received zirconium. While, as for molybdenum ion implantation, the results are opposite. Finally, the mechanisms of the corrosion behavior of the zirconium samples implanted with zirconium and molybdenum ions are discussed.     

Preparation of CaS∶Eu~(2 ), Sm~(3 ) by Solid Reaction Method and Its Photostimulated Luminescence

Thereisanurgentneedonopticalstoragemateri alswiththedevelopmentoflaserandopticalstoragetechnologyinrecentyears .Electrontrappingopticalstoragematerials (ETM )isanewtypeofopticalstor agematerials .Theybasicallyarewide band gapⅡ Ⅵsemi conductorcompoundsdopedwithtwotypesofselectedrareearthelementsthathavegroundstatesandexcitedstateswithinthewidebandgapoftheⅡ Ⅵsemiconductorcompoundhostmaterials .Lighten ergyisstoredinthiskindofmaterialbyexposingittoultravioletorvisiblelightandisreleasedthro…     

丹东市个体私营经济发展态势分析

我市个体私营经济具有一定的经济基础,发展前景广阔,渐趋成为全市经济的重要组成部分。本文阐述了我市个体私营经济的现状,分析了发展中存在的问题,提出了加快发展所应采取的措施。     

鞍钢3200m3高炉矿槽施工

介绍了鞍钢新1号高炉(3200m3)矿槽结构的设计原理及其所包含的钢结构、混凝土结构施工技术要点和质量控制,并作出了技术经济效果评述.     

龙南稀土矿区周边水体污染特征及风险评价

为研究龙南稀土矿区地表水和地下水污染物迁移规律及污染成因机制,开展了矿区周边地表水、地下水水质现状监测工作,对研究区周边地表水、地下水中pH、硫酸盐、硝酸盐、亚硝酸盐、氨氮浓度进行分析测定,运用改进内梅罗综合污染指数法和健康风险评价模型对水体污染程度及不同年龄段人群健康风险进行评估。结果表明,地表水料坑处的综合污染指数最高,达到54.19,属于严重污染程度;关西翰岗桥处综合污染指数最低,仅为2.119,属于较清洁程度;料坑、黄沙河和临塘一处理站下游的综合污染指数均达到严重污染程度;地下水采样点综合污染指数均达标,水质清洁。健康风险评价结果表明,研究区地表水及地下水中的硝酸盐对人体造成的健康风险较大,亚硝酸盐与氨氮次之;经非致癌健康风险计算,饮用地下水和地表水对不同年龄人群的影响程度为幼儿＞青年＞成人,因此应对龙南稀土矿区周边0~6岁幼儿用水安全给予更多关注。